WINCHESTER XPR
.jpg)
===================================================================================================
So many rifle owners want the reliability and strength of a metal magazine for their rifle. But now days, they want more - larger capacity, longer OAL and long wearing. AND, they don't want to make modifications to obtain their needs. Waters Rifleman may be able to help...allowing shooters to achieve a complete magazine solution. - Many solutions and designs are drop in fit, meaning no modification require (refer to each instance for confirmation on this). - Made of light weight aircraft grade billet aluminium, hard black anodised (not regular decorative anodise) finish (may be some variation in colour from batch to batch). - Can be disassembled for easy cleaning and maintenance (recommended). - Reliable tempered Stainless Steel coil spring activating a POM injection moulded OR an or ABS printed follower. - Deep side wall followers to reduce tipping and jamming (stove piping) and increase reliability. - Extended length internals (where possible) to allow longer rounds with longer bullets or bullets seated out further (eg. 223 loading 80 grain projectiles out to the lands).
FIT & FUNCTION: These magazines are made for the fastidious shooter that wants the BEST match grade AND MATCH WINNING magazine available. Likewise, shooters of the Waters Rifleman mags are expected to have a basic understanding of how magazines work - understanding tolerances, temperature change, round stacking geometry, etc. This is precision equipment, and precision equipment should be maintained. Click here for WR MAGAZNIE ASSEMBLY and MAINTENANCE USER GUIDE.
DOESN'T FIT. There have been the odd occasion where a shooter magazine will not latching/clicking in place easily. We believe this is due to an intolerance of the rifle stock during moulding, or possibly swelling from moisture, or by over tightening of the stock take-down screws, or a number of other things. Also, some shooters are bedding their receivers, which increases the receiver height from the floor of the stock. Our mags are made to factory spec plus or minus 0.1mm, and from billet aluminium that won't suffer post machining change. If the magazine is too tight to latch, Click here for WR MAGAZINE ASSEMBLY and MAINTENANCE USER GUIDE.
TIGHT IS BEST: Ensuring a tight and solid fit keeps your repeater rifle close in performance as a bolt action single shot rifle. Tight and solid assembly and fixing keeps harmonic vibration even through the whole rifle system, and helps dampen the vibration quicker and minimise vibration intensity spots.
MARKING AND SACRIFICE: WR magazines are made of metal. Metal on metal will always result in witness marks. Use of the WR mag will result in witness marks on the aluminium magazine body. This is always going to happen, and is preferred to protect undue wear in the more expensive rifle receiver. The sacrificial wear areas are the front latch tang, rear top flat where mating the trigger front tension leaf spring, and the top rear pivot corners. Witness marks can be marked over with black.
FIT & FUNCTION: These magazines are made for the fastidious shooter that wants the BEST match grade AND MATCH WINNING magazine available. Likewise, shooters of the Waters Rifleman mags are expected to have a basic understanding of how magazines work - understanding tolerances, temperature change, round stacking geometry, etc. This is precision equipment, and precision equipment should be maintained. Click here for WR MAGAZNIE ASSEMBLY and MAINTENANCE USER GUIDE.
DOESN'T FIT. There have been the odd occasion where a shooter magazine will not latching/clicking in place easily. We believe this is due to an intolerance of the rifle stock during moulding, or possibly swelling from moisture, or by over tightening of the stock take-down screws, or a number of other things. Also, some shooters are bedding their receivers, which increases the receiver height from the floor of the stock. Our mags are made to factory spec plus or minus 0.1mm, and from billet aluminium that won't suffer post machining change. If the magazine is too tight to latch, Click here for WR MAGAZINE ASSEMBLY and MAINTENANCE USER GUIDE.
TIGHT IS BEST: Ensuring a tight and solid fit keeps your repeater rifle close in performance as a bolt action single shot rifle. Tight and solid assembly and fixing keeps harmonic vibration even through the whole rifle system, and helps dampen the vibration quicker and minimise vibration intensity spots.
MARKING AND SACRIFICE: WR magazines are made of metal. Metal on metal will always result in witness marks. Use of the WR mag will result in witness marks on the aluminium magazine body. This is always going to happen, and is preferred to protect undue wear in the more expensive rifle receiver. The sacrificial wear areas are the front latch tang, rear top flat where mating the trigger front tension leaf spring, and the top rear pivot corners. Witness marks can be marked over with black.
======================================================================================================
WR WINCHESTER XPR MAGAZINE
This is a straight retro fit with NO modification aftermarket soluiton for the Winchester XPR rifle to allow the charging with up to 10 rounds.Machined from billet aircraft grade aluminium, black hard anodised surface finish.Due to partial side-by-side stacking the depth of the mag is much less or approx double that of the factory 5 or 3 round mag.
.jpg "WR Magazine Winchester XPR 222 223 10 shot 2.4\"")
SHORT ACTION
10 rounds 61mm 2.4" OAL
222 Rem, 223 Rem, 350 Legend
PN: 0331, A$155ea.
SOLD OUT. ETA APRIL 2025.
Weight: 125grm (4.5oz)
MEDIUM ACTION
10 rounds 76.6mm 3.01" OAL
243 Win, 6.5 CM, 7mm-08 Rem, 308 Win.
PN: 0332, A$170ea.
AVAILABLE NOW.
Weight: 140grm (4.95oz)
MEDIUM ACTION -SHORT MAGNUM
7 rounds 76.6mm 3.01" OAL
6.5 PRC, 270 WSM, 6.8 Western,
300 WSM, 325 WSM
PN: 0333, A$170ea.
SOLD OUT. ETA APRIL 2025.
Weight: 140grm (4.95oz)
WR SINGLE ROUND LOADING BLOCK (SLRB)- WINCHESTER XPR SHORT ACTION223, 243, 6.5 CM, 6.8 Western, 7mm-08, 308, 350 Legend.6.5 PRC, 270 WSM, 300 WSM, 325 WSM.FDM PRINTED ABS.PN: 0336, A$20ea AVAILABLE NOW.
.jpg)
================================================================================================================================
LONG ACTION - 10 rounds 88.1mm 3.46" OAL
270 Win, 30-06 SpringfieldPN: 0334, A$195ea. AVAILABLE NOW.
Weight: 170grm (6oz)
LONG ACTION - 8 rounds MAGNUM 88.1mm 3.46" OAL
7mm Rem Mag, 300 Win Mag, 338 Win Mag.PN: 0335, A$195ea. AVAILABLE NOW.
Weight: 170grm (6oz)
.jpg)
WR SINGLE ROUND LOADING BLOCK (SLRB)- WINCHESTER XPR LONG ACTION25-06, 270 Win, 30-06 Springfield and family.
7mm Rem Mag, 300 Win Mag, 338 Win Mag.FDM PRINTED ABS.PN: 0337, A$20ea AVAILABLE NOW.
===========================================================================================================================================
ENQUIRIES: e-mail waters rifleman via the contact form on the HOME PAGE...Please simply advise which items you are interested in, how many and your location.Please check your reply email address (all correspondence is via email ONLY)....You’ll then be directed to a distributor that services your region...