RCA Dimensia

Computer

The main unique feature of the Dimensia system was the MRT 003, a 32-kilobyte built-in computer module which allowed the monitor to communicate with all Dimensia components and the remote functions.^[2] All components were connected via the control bus found on the I/O panel on the back of the TV. The control bus was a unique RCA connector which was colored black. All Dimensia branded components had this control jack and they all interconnected by using RCA plugs that could piggy-back, resulting in a daisy chain which simplified wiring. This was known as the SystemLink, a communication system that had 16 kilobytes of computer memory (after the discontinuation of the Dimensia product line, RCA reused the SystemLink term for their universal remotes).^[3]

Input/Output

One of the main features of the Dimensia's was the large input/output panel on the back. This included several RCA composite video terminals as well as multiple unbalanced and balanced RF antenna/cable inputs. This enabled easy connection of all Dimensia system components, each on their own channel. Additionally, the RCA cables were able to be connected piggy-back, resulting in daisy-chain wiring. The components were also connected to the control bus data link via the same piggy-back style RCA connectors. All Dimensia-Intelligent components could interact with the monitor's built-in computer. The first generation console Dimensia I/O panel shown to the left also has a SCART interface, an early multiport A/V interface which was popular in Europe (called EIA Multiport-Stereo Connector by RCA).^[4]

Universal Remote

The Dimensia system came with a very large and advanced universal remote, called Dimensia Intelligent Audio Video or Dimensia Digital Control, variations of the Digital Command Center. The capabilities of this remote were far more advanced than many (perhaps any) other remotes at that time. For example, with other universal remotes you can control everything separately by controlling one component at a time; one command at a time. With the Dimensia remote, just pushing the VCR button will turn on the VCR, turn on the monitor and then play the tape in the VCR, assuming there is one in the VCR.^[5]

The Dimensia remote was not programmable like most universal remotes today. It was only fully compatible with Dimensia components. These components were referred to as Dimensia Intelligent, hence the name, Dimensia Intelligent Audio Video.

Television

Dimensia televisions had many unique features that were state of the art at the time and some that are still rare today, including:

VHS (1987)

• FS Tuner
• VHS Hi-Fi stereo
• Headphone Jack
• HQ VHS Picture (better than normal VHS but inferior to S-VHS)
• Slow Motion
• Timer Recording
• Ability to record one program while watching a different program at the same time (Dimensia only)
• Record both the normal stereo audio and SAP audio on the same tape

Dual Auto-Reverse Cassette Deck (1987)

• One-Touch Dubbing
• Record Mute
• Random Memory Play

Audio-Video Control Center (1987)

• Dimensia Remote Control
• Automatic switching between components (TV, VCR, turn table, CD, etc. Dimensia only)
• Manual tone controls^[7]
• 20-station memory

Basic/console

This variation of the Dimensia featured just the TV monitor mounted in a heavy wood grain veneer with a large input/output panel. It was on a swivel mount. It was not as commercial as the monitor for the full component-based Dimensia system; however, it was still considered high-end and had the control bus. In other words, the console Dimensia system was intended to be more stand-alone television set than the full Dimensia system. The second generation console version of the Dimensia had the speakers located on the sides rather than underneath the screen (e.g. Model GPR2750P). It had three coaxial cable/antenna posts for separate RF inputs and one output.

Audio: Since the console Dimensia monitor was intended to stand alone (the full system had a 100 or 200 watt amplifier and 3-way tower speakers), but was still a high-end system, it featured a more complete built-in audio system than most monitors of the time. It had both woofers and tweeters in the TV cabinet, whereas almost all standard CRT television sets featured just one (mono) or two (stereo) low fidelity mid-range speaker drivers. It also had selectable external speaker connectors to be powered by the internal amp.

Commercial

The commercial models featured a 20-foot-long (6.1 m) grounded power cord and BNC high-end commercial coaxial inputs. These models were around before the Dimensia system and were called the RCA Lyceum TV. These units were often used in educational facilities or other institutions and had the same chassis as the Colortrak 2000 and Dimensia tabletop model (the primary one). The commercial models had many extensive features such as automatic color balance and an automatic screen brightness adjuster which varied according to the ambient light in the room; at night or with the lights off it would lower its brightness.

Full Dimensia system

Retailed at over $5,000 USD upon its release in October 1984,^[8] it came with all the matching Dimensia-intelligent components, including the VCR, CED player (canceled just before release, with the Digital Command Center remote's "DISC" button being relabeled "VID2", though some of the manuals for Dimensia components continued to show the original "DISC" button; some CED players released before the Dimensia system hit the market have the special control jack and can be used with the system), amplifier, equalizer, speakers, tuner, cassette recorder, CD player and turntable. This was the most remarkable system, as all the components were compatible with the TV's computer and almost any operation could be executed with just the push of a button on the Digital Command Center.

The two TV sets that were the center of this system (FKC2600E and FKC2601T) were physically identical to the Colortrak 2000 chassis. These monitors were where the systems 32 kilobyte microprocessors were located. They sat in a dedicated entertainment center that suited all the components of this fully integrated system. The system was available in two color schemes; a woodgrain veneer and a black exterior from 1984 to 1986.^[6] These monitors featured BTSC system three-channel audio which had just been adopted by the Federal Communications Commission as the U.S. standard for stereo television transmission in 1984, the same year as the release of Dimensia.

In 1985, RCA released a 40-inch projection monitor for the system with the 32 kilobyte microprocessors. This was otherwise identical to the 26 inch displays that were initially released.^{[citation needed]}

Digital command component system

In 1985, RCA released a fully integrated audio system known as the "RCA Audio System" that used the MSR-140 stereo receiver as its center for control over all the components. This allowed all Dimensia audio components to be controlled and fully functional without the need of a Dimensia television set.^[11] The price of this system started at $1,500 and included the Digital Command Center remote control.^[12] It also used the Colortrak 2000 monitor.^[13]

The SPK400 and SPK500, released in 1987, were second generation three-way speaker systems. Also released in 1987 for the second generation Dimensia system and for the Digital Command Component System were the MPA-100 and MPA-120 amplifiers; released to replace the MSA-100 and MSA-200, respectively.

In 1987, RCA released the MSP400 for the second-generation Dimensia audio system, an early Dolby Pro Logic surround sound decoder.^[9]