The Difference Between Shocks and Struts

When you drive over a speed bump, pothole, or other rough roads, you’ll be thankful when the shocks and struts on your vehicle are working well. While these two vehicle components are often discussed together, they are individual parts that provide a vital service for keeping your vehicle sturdy and safe. If you’ve ever wondered about the difference between shocks and struts, this article should shed some light. Let’s take some time to break down what a shock is and a what strut is, the duties they perform, and what happens when they wear out.

Are Shocks and Struts the Same Part?

Each vehicle driving down the road today has a vehicle suspension system comprised of multiple individual parts — including shock absorbers (or struts) and springs. Springs are designed to support the vehicle and cushion the ride when the vehicle strikes objects in the road. The shock absorbers (also known as struts) limit the vertical travel or motion from the springs along with absorbing or soaking up the impact from road obstructions.

People typically use the terms shocks and struts to describe the same part since they actually serve the same function. However, there is a difference in the design of the shocks and the strut — and each has unique advantages and disadvantages:

  • The primary difference between a strut and shock is in the design of the individual suspension system.
  • All vehicles will use a shock or a strut on each of the four corners. Several use struts on the front with a shock absorber in the rear.
  • Struts are used on vehicles without an upper control arm and connect to the knuckle while vehicles with an upper and lower control arm (independent suspension) or a solid axle (on the rear) use shock absorbers.

What is a Shock Absorber?

A shock absorber is designed to be slightly stiffer than a strut. This is mainly because they work with ancillary suspension components to absorb the shock from the road. There are 3 main types of shock absorbers:

  1. Mono-tube Shock Absorber: The most common type of shock absorber used is a mono-tube (or gas) shock absorber. This component is made from a steel tube with a rod and piston installed inside. As the vehicle drives over a bump, the piston pushes upward and is compressed slowly by gas for a smoother transition.
  2. Dual Shock:A dual or twin-tube shock features two vertical tubes that are filled with hydraulic fluid as opposed to gas. As it’s compressed, fluid is transferred to the secondary tube.
  3. Coil-Over Shocks: Vehicles with shock absorbers installed on the front are typically called coil over shocks — they have a shock absorber that is ‘covered’ by a coil spring.

What is a Strut?

The most common type of strut is referred to as the MacPherson strut. This is a very sturdy and durable component that combines the strut and spring into a single unit. There are some vehicles that utilize a single strut with a separate coil spring. Struts are typically mounted to a steering knuckle, with the top of the ‘spring’ installed to support the body. Struts are much smaller than shock absorbers, which is a primary reason why they are often used in vehicles with compressed suspension travel.

Should I Use a Shock or Strut in My Car?

Like any other moving part, a shock and strut are designed to wear out over time. Depending on the type of vehicle you own, they can last anywhere from 30,000 to 75,000 miles. They should be replaced as recommended by the vehicle manufacturer, and it’s always a good idea to use OEM (original equipment manufacturer) replacement parts when they require replacement. If your vehicle came from the factory with shock absorbers, you need to replace them with the same type of component. The same is to be said about struts.

Shocks and struts should always be replaced in pairs (on the same axle at the least) and the vehicle should have a professional suspension alignment completed to ensure the tires, steering, and complete suspension system is aligned straight.


The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Need Help With Your Car?

Our certified mobile mechanics make house calls in over 2,000 U.S. cities. Fast, free online quotes for your car repair.

GET A QUOTE

Related articles

How to Replace Hood Support Struts
The hood struts, or lift support, support your vehicle's hood while you access the engine compartment. A failed strut is a safety concern.
How to Replace a Shock Absorber
Replacing a shock absorber can take some work, as it requires lifting your vehicle and ensuring you are aligning the new shock correctly.
How to Troubleshoot a Car Pulling to One Side
If your car pulls to the left or leans to one side, check that your tires are all the same size, suspension parts are even, and if springs are bent.

Related questions

What are the advantages of aftermarket suspension parts?
There are many advantages to using aftermarket steering (https://www.yourmechanic.com/article/all-about-aftermarket-parts) and suspension parts over factory-made suspension parts on most makes and models. A lot of it has to do with being price competitive and having better than OEM (original equipment manufacturer)...
Airmatic issues with front of car
Hi. The Mercedes-Benz air suspension uses an air compressor and air struts to provide a comfortable ride over any terrain. Unfortunately, the system is known for being problematic. Since just the front of your car is collapsed, the problem is...
Noise when turning
Among the possibilities are the strut bearings, strut mounts, the strut itself, the outer cv axle joints, and/or any suspension component, such as a tie rod end (https://www.yourmechanic.com/services/tie-rod-end-replacement), ball joint (https://www.yourmechanic.com/services/ball-joint-front-replacement), sway bar mount, or suspension bushing that is loose...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · [email protected]