Jump to content

Àdàkọ:Àpótíọ̀rọ̀ pápá ọkọ̀-ojúòfurufú

Lát'ọwọ́ Wikipedia, ìwé ìmọ̀ ọ̀fẹ́
Àtúnyẹ̀wò ní 15:13, 26 Oṣù Bélú 2012 l'átọwọ́ Demmy (ọ̀rọ̀ | àfikún)
(ìyàtọ̀) ← Àtúnyẹ̀wò tópẹ́ju | Àtúnyẹ̀wò ìsinsìnyí (ìyàtọ̀) | Àtúnyẹ̀wò tótuntunju → (ìyàtọ̀)
{{{name}}}
{{{nativename}}}
{{{nativename-a}}}
{{{nativename-r}}}
[[Image:{{{image}}}|220px]]
{{{caption}}}
IATA: {{{IATA}}}ICAO: {{{ICAO}}}
Summary
Elevation AMSL  ft /  m
Coordinates {{{coordinates}}}
Runways
Direction Length Surface
ft m
{{{r1-number}}} {{{r1-length-f}}} {{{r1-length-m }}} {{{r1-surface}}}
{{{r2-number}}} {{{r2-length-f}}} {{{r2-length-m }}} {{{r2-surface}}}
Helipads
Number Length Surface
ft m
{{{h1-number}}} {{{h1-length-f}}} {{{h1-length-m }}} {{{h1-surface}}}
{{{h2-number}}} {{{h2-length-f}}} {{{h2-length-m }}} {{{h2-surface}}}
Statistics ({{{stat-year}}})
{{{stat1-header}}} {{{stat1-data}}}
{{{stat2-header}}} {{{stat2-data}}}
{{{footnotes}}}
Ìwé-alàyé àdàkọ[ìwò] [àtúnṣe] [ìtàn] [ìfọnù]

Lua error in package.lua at line 80: module 'Module:Transclusion_count/data/À' not found.

Usage

The following blank template includes all of the available parameter names, except for repeating names used for runways and statistics. All parameters except name are optional, however "IATA: none – ICAO: none" along with the heading "Summary" will always appear. Any unused parameters should be omitted, but can also be left blank if preferred. The use of flag icons with this infobox are discouraged.

{{Infobox airport
| name         =
| nativename   =
| nativename-a =
| nativename-r =
| image        =
| image-width  = <!-- if less than 200 -->
| caption      =
| image2       =
| image2-width = <!-- if less than 200 -->
| caption2     =
| IATA         =
| ICAO         =
| FAA          =
| TC           =
| LID          =
| GPS          =
| WMO          =
| type         =
| owner-oper   =
| owner        =
| operator     =
| city-served  =
| location     =
| hub          =
| focus_city   =
| built        = <!-- military airports -->
| used         = <!-- military airports -->
| commander    = <!-- military airports -->
| occupants    = <!-- military airports -->
| metric-elev  =
| elevation-f  =
| elevation-m  =
| website      =
| coordinates  =
| latd  =  | latm  =  | lats  =  | latNS  = 
| longd =  | longm =  | longs =  | longEW =
| coordinates_type       =
| coordinates_region     =
| coordinates_notitle    =
| image_map              =
| image_mapsize          =
| image_map_alt          =
| image_map_caption      =
| pushpin_map            =
| pushpin_mapsize        =
| pushpin_map_alt        =
| pushpin_map_caption    =
| pushpin_relief         =
| pushpin_image          =
| pushpin_label          =
| pushpin_label_position =
| pushpin_mark           =
| pushpin_marksize       =
| metric-rwy   =
| r1-number    =
| r1-length-f  =
| r1-length-m  =
| r1-surface   = <!-- up to r8 -->
| h1-number    =
| h1-length-f  =
| h1-length-m  =
| h1-surface   = <!-- up to h12 -->
| stat1-header =
| stat1-data   = <!-- up to stat4 -->
| stat-year    =
| footnotes    =
}}

All parameters except name are optional.

These parameters specify the airport name which is displayed at the top of the infobox.

name
The name of the airport in English, such as Warsaw Chopin Airport or Beijing Capital International Airport.
nativename
Airport name in a native language using Western characters (French, German, Spanish, etc.), such as Lotnisko Chopina w Warszawie. In such cases the native name should be in italics, see Wikipedia:Manual of Style/Text formatting#Foreign terms. Can also be used for two different names in the same language (see Region of Waterloo International Airport).
nativename-a
Airport name in a native language with non-Western characters (Chinese, Japanese, Korean, Arabic, etc.), such as 北京首都国际机场.
nativename-r
Use in conjunction with above for Romanized name of the airport, such as Běijīng Shǒudū Guójì Jīcháng. In such cases the Romanized name should be in italics, see Wikipedia:Manual of Style/Text formatting#Foreign terms.

These parameters specify an airport photograph or logo which is displayed below the title. A second image can also be displayed below the first image by using the parameter names ending with a "2".

image / image2
The name of image file, such as Airport.png or Logo.gif (do not include the File: or Image: prefix).
image-width / image-width2
The image width in pixels, i.e. 175 (defaults to 220 if not specified).
This should only be used for smaller images which would appear distorted when expanded to a width of 220px.
caption / caption2
Text displayed beneath the image. If left blank or omitted, a caption will not be displayed.
This should only be used for photographs that require an explanation; it should be omitted for airport logos and may be omitted for aerial photographs.

These parameters specify airport location identifiers which are displayed below the image (or below title if there is no image):

IATA
The airport's three character IATA location identifier. If omitted or left blank it will display as IATA: none.
ICAO
The airport's four character ICAO location identifier. If omitted or left blank it will display as ICAO: none.
FAA
The three or four character FAA location identifier for airports in the United States. If omitted or left blank, nothing is displayed.
TC
The three or four character Transport Canada location identifier for airports in Canada. If omitted or left blank, nothing is displayed.
LID
A location identifier for airports outside the US or Canada, if other than ICAO or IATA codes. If omitted or left blank, nothing is displayed.
GPS
A Global Positioning System code for the airport, if other than ICAO or IATA codes. If omitted or left blank, nothing is displayed.
WMO
The World Meteorological Organization five digit code for the weather station at the airport. If omitted or left blank, nothing is displayed.

These parameters specify airport details for the "Summary" section displayed below the airport codes.

type
Airport type should be one of the following: Public, Private, Military or Military/Public. Do not use Commercial, General or Civil.
owner-oper
If the airport is owned and operated by the same entity, use this in place of owner and operator.
owner
Name of the airport owner.
operator
Name of the airport operator, if not the owner.
city-served
If the airport is associated with a major city but actually located in a smaller town, list the major city here and the smaller town under location. This is not automatically linked, in order to allow multiple links if needed.
Example: city-served = [[Paris]]
Result: Paris
location
Name of the town or city where the airport is located. Do not put the airport's street address in this field. This is not automatically linked, in order to allow multiple links if needed.
Example: location = [[Orly]], [[France]]
Result: Orly, France
hub
If the airport serves as an hub list the airlines here. This is not automatically linked, in order to allow multiple links if needed.
Example: *[[British Airways]] *[[BMI (airline)|BMI]] *[[Virgin Atlantic Airways]]
Result:
focus_city
If the airport serves as a focus city, list the airlines here. See discussion at Wikipedia talk:WikiProject Airports#Focus Cities on pages.
elevation-f
Height above mean sea level, in feet.
elevation-m
Height above mean sea level, in metres.
website
External link to the airport's official website. See Wikipedia: External links#How to link for more information.
Example: website = [http://www.dfwairport.com/ www.dfwairport.com]
Result: www.dfwairport.com

Military airports

[àtúnṣe àmìọ̀rọ̀]

These optional parameters provide additional information for military airports. The parameter names are based on those used in Template:Infobox military structure. This allows the display of information from that template, without the need to include an additional infobox. See example 4 below.

built
The date when the structure was built, usually given in years.
used
The period during which the structure was in active military use, usually given in years.
commander
The current commanding officer, for structures currently in military use.
occupants
Any notable military units which occupy the structure.

Geographic coordinates

[àtúnṣe àmìọ̀rọ̀]

This template allows for the insertion of geographic coordinates in two different ways: you can either provide a complete {{Coord}} template in the coordinates parameter, or you can provide the individual coordinate components (degrees, minutes, seconds, etc.) in the separate parameters described below. The latter method also allows you to insert a pushpin map with an automatically-placed airport icon and label (see below).

If you use both methods, then the coordinates parameter will be used in the infobox.

coordinates
Latitude and Longitude of airport, specified using the {{Coord}} template. When entering the coordinates always ensure that the resultant map or image shows the airport. It is very easy to confuse "N" for "S" or "E" for "W". If used as shown below, this will also cause the airport to appear in Google Earth's Geographic Web Layer.
Example: coordinates = {{Coord|49|27|16|N|002|06|46|E|type:airport_region:FR|display=inline,title}}
Result: 49°27′16″N 002°06′46″E / 49.45444°N 2.11278°E / 49.45444; 2.11278
latd
Latitude degrees. Can also be used for decimal degrees.
latm
Latitude minutes. Omit or leave blank if latd has a decimal value.
lats
Latitude seconds. Omit or leave blank if latd has a decimal value.
latNS
Latitude North or South (enter N or S). Omit or leave blank if latd has a decimal value.
longd
Longitude degrees. Can also be used for decimal degrees.
longm
Longitude minutes. Omit or leave blank if longd has a decimal value.
longs
Longitude seconds. Omit or leave blank if longd has a decimal value.
longEW
Longitude East or West (enter E or W). Omit or leave blank if longd has a decimal value.
coordinates_type
Set the type parameter for the coordinates. If this parameter is omitted or left blank, the type will be set to airport. It is unlikely that you would need to change this.
coordinates_region
Set the region parameter for the coordinates. Use either a two character ISO 3166-1 alpha-2 country code or an ISO 3166-2 region code. For example, the United Kingdom is GB, and Ontario, Canada is CA-ON.
coordinates_notitle
By default the coordinates will be displayed both in the infobox and in the title of the article. If this parameter is set to a non-empty value, the coordinates will be displayed only in the infobox.

This template provides two ways to include a map: as a simple image, or using {{Location map}} and the coordinate parameters described above to automatically place a pushpin mark and label on a map.

Am image map can be displayed by providing a value for image_map. The remaining image_ parameters are optional.

image_map
The name of an image to use as a map, such as Airport_map.png (do not include the File: or Image: prefix).
image_mapsize
(optional) The width to display the image map, in pixels. Just the number, no "px". If omitted or left empty, defaults to 220.
image_map_alt
(optional) Alt text for the image map. If left blank or omitted, this defaults to same text used in image_map_caption (or Location of {{{name}}} if no caption.
image_map_caption
(optional) Caption to display below the image map. If left blank or omitted, a caption will not be displayed.

Location/pushpin map

[àtúnṣe àmìọ̀rọ̀]

A location map can be displayed by providing values for latd, longd, and pushpin_map. The remaining pushpin_ parameters are optional.

pushpin_map
The name of a location map as per Template:Location map (eg. Indonesia or Russia). The coordinate fields (eg. latd and longd) position a pushpin mark and label on the map automatically.
pushpin_mapsize
(optional) The width to display the pushpin map, in pixels. Just the number, without "px". If omitted or left empty, defaults to 220.
pushpin_map_alt
(optional) Alt text for the pushpin map.
pushpin_map_caption
(optional) Caption to display below the pushpin map. If left blank or omitted, a caption will not be displayed.
pushpin_relief
(optional) Any non-blank value (yes, 1, etc.) will cause the template to display a relief map image, where available (see example 1). For additional information, see Template:Location map#Relief parameter.
pushpin_image
(optional) Name of an alternative map image, which must have the same edge coordinates as the location map template specified via pushpin_map (see example 5). Do not include the File: or Image: prefix. For additional information, see Template:Location map#AlternativeMap parameter.
pushpin_label
(optional) The text of the label to place next to the pushpin mark (see example 1). The default is the value of the name parameter.
pushpin_label_position
(optional) The position of the label on the pushpin map relative to the pushpin mark (see example 5). Valid values are left, right, top and bottom. This defaults to either left or right, depending on the coordinates of the marker and its position relative to the right border of the map image.
pushpin_mark
(optional) The name of an image to display as the pushpin mark (see example 5). The default is File:Airplane silhouette.svg ( ).
pushpin_marksize
(optional) The size of the mark in pixels (see example 5). The default is 10. Do not include px, for example: pushpin_marksize = 8, not pushpin_marksize = 8px.

These parameters control how certain fields within the infobox are displayed.

metric-elev
Set to any value to display elevation in metric units (metres) before imperial/US units (feet); leave blank to display imperial/US units first. This can be seen in example 1.
metric-rwy
Set to any value to display runway length in metric units (metres) before imperial/US units (feet); leave blank to display imperial/US units first. Examples 1 and 2 below show the runway length with metres first; example 3 and 4 show it with feet before metres.

These parameters specify details for each runway in the "Runways" section displayed below the summary. This can also be used to specify water landing areas for seaplanes (see Fairbanks International Airport). Parameters start with r1- for the first runway, r2- for the second runway, up to r8- for the eighth runway (if more are needed, leave a message on the talk page). Each airport should have at least one runway.

rn-number (r1-number, r2-number, ...)
The designation of the runway, normally two numbers like this → 02/20, 1st number is 18 lower than the 2nd. Where there are parallel runways an additional letter is added to each number, for example "L" for left, "R" for right and "C" for center. In certain cases a runway will only have one number when it can only be used in one direction. For airports in the United States the leading zero is not used and the designation should read 2/20.
rn-length-f (r1-length-f, r2-length-f, ...)
Runway length in feet.
rn-length-m (r1-length-m, r2-length-m, ...)
Runway length in metres.
rn-surface (r1-surface, r2-surface, ...)
Runway surface type, such as: Concrete, Asphalt, Gravel, Grass (or Turf), Dirt, Water, etc. Avoid the generic type "Paved" if possible.

These parameters specify details for each helipad in the "Helipads" section displayed below the runways. Parameters start with h1- for the first helipad, h2- for the second helipad, up to h12- for the twelfth helipad (if more are needed, leave a message on the talk page). This section is optional and only appears if the h1- parameters are specified. See example 1 and example 3 below.

hn-number(h1-number, h2-number, ...)
The designation of the helipad. In the United States this is usually the letter "H" followed by a number, i.e. "H1", "H2", etc.
hn-length-f (h1-length-f, h2-length-f, ...)
Helipad length in feet.
hn-length-m (h1-length-m, h2-length-m, ...)
Helipad length in metres.
hn-surface (h1-surface, h2-surface, ...)
Helipad surface type, such as: Concrete, Asphalt, etc. Avoid the generic type "Paved" if possible.

These parameters specify details for an optional "Statistics" section displayed below the runways and helipads. Parameters start with stat1- for the first statistic, stat2- for the second statistic, etc. This section only appears if the stat1- parameters are specified. See example 1 and example 3 below.

statn-header (stat1-header, stat2-header, ...)
A brief description of each statistic, such as Passengers or Aircraft operations.
statn-data (stat1-data, stat2-data, ...)
The data associated with the corresponding header.
stat-year
The calendar year for the statistics. This is displayed in parentheses after the word "Statistics" in the section header.

This parameter contains text for footnotes displayed at the bottom of the infobox.

footnotes
The most common use for this field is to give sources or references for the data displayed in the infobox. See the examples below.
Warsaw Frederic Chopin Airport
Port Lotniczy im. Fryderyka Chopina
Warszawa/Okęcie Airport
IATA: WAWICAO: EPWA
Summary
Airport type Public / Military
Operator Polish Airports State Enterprise (PPL)
Serves Warsaw
Location Okęcie district of Warsaw
Hub for LOT Polish Airlines, Wizz Air
Elevation AMSL 110 m / 362 ft
Coordinates 52°09′57″N 020°58′02″E / 52.16583°N 20.96722°E / 52.16583; 20.96722
Website www.lotnisko-chopina.pl
Map
WAW is located in Poland
WAW
WAW
Location of airport in Poland
Runways
Direction Length Surface
m ft
11/29 2,800 9,186 Asphalt
15/33 3,689 12,106 Asphalt
Helipads
Number Length Surface
m ft
H1 40 131 Concrete
Statistics (2008)
Passengers 11,736,958
Movements 159,718
Statistics: Civil Aviation Office[1]
Sources: Polish AIP at EUROCONTROL[2]

Warsaw Frederic Chopin Airport

This example shows the appearance of the infobox without an image.

It also shows the use of the parameters for latitude, longitude, and location/pushpin map.

Note: helipad information added to illustrate function of metric-rwy parameter.

{{Infobox airport
| name         = Warsaw Frederic Chopin Airport
| nativename   = ''Port Lotniczy im. Fryderyka Chopina''
| nativename-r = Warszawa/Okęcie Airport
| image        = <!--leave blank, this is demo without image-->
| IATA         = WAW
| ICAO         = EPWA
| type         = Public / Military
| operator     = Polish Airports State Enterprise (PPL)
| city-served  = [[Warsaw]]
| location     = [[Okęcie]] district of [[Warsaw]]
| hub          = [[LOT Polish Airlines]], [[Wizz Air]]
| metric-elev  = yes
| elevation-m  = 110
| elevation-f  = 362
| website      = [http://www.lotnisko-chopina.pl/?lang=en www.lotnisko-chopina.pl]
| latd  =  52 | latm  = 09 | lats  = 57 | latNS  = N
| longd = 020 | longm = 58 | longs = 02 | longEW = E
| coordinates_region     = PL-MX
| pushpin_map            = Poland
| pushpin_map_caption    = Location of airport in Poland
| pushpin_relief         = yes
| pushpin_label          = WAW
| metric-rwy   = yes
| r1-number    = 11/29
| r1-length-m  = 2,800
| r1-length-f  = 9,186
| r1-surface   = [[Asphalt]]
| r2-number    = 15/33
| r2-length-f  = 12,106
| r2-length-m  = 3,689
| r2-surface   = Asphalt
| h1-number    = H1
| h1-length-m  = 40
| h1-length-f  = 131
| h1-surface   = [[Concrete]]
| stat-year = 2008
| stat1-header = Passengers
| stat1-data = 11,736,958
| stat2-header = Movements
| stat2-data = 159,718
| stat
| footnotes    = Statistics: Civil Aviation Office<ref name="stats">[http://www.ulc.gov.pl/_download/regulacja_rynku/statystyki/liczba_obsl_pasazerow_przesylek_20042007_150208.pdf Data from The Civil Aviation Office of Poland (Urząd Lotnictwa Cywilnego)]. {{pl icon}}</ref><br>Sources: Polish [[Aeronautical Information Publication|AIP]] at [[European Organisation for the Safety of Air Navigation|EUROCONTROL]]<ref>[http://www.ead.eurocontrol.int/publicuser/protect/pu/main.jsp EAD Basic]</ref>
}}
Beijing Capital International Airport
北京首都国际机场
Běijīng Shǒudū Guójì Jīcháng
Beijing Capital Departure Hall
IATA: PEKICAO: ZBAA
Summary
Airport type Public
Operator Civil Aviation Administration of China
Serves Beijing
Location Chaoyang District, Beijing
Hub for Air China, China Southern Airlines
Elevation AMSL 116 ft / 35 m
Coordinates 40°04′48″N 116°35′04″E / 40.08000°N 116.58444°E / 40.08000; 116.58444 (Beijing Capital International Airport)
Website www.bcia.com.cn
Runways
Direction Length Surface
m ft
18L/36R 3,800 12,467 Asphalt
18R/36L 3,200 10,499 Asphalt

Beijing Capital International Airport

This example shows the appearance of the infobox with an image and a caption.

It also uses both the nativename-a and nativename-r parameters.

{{Infobox airport
| name         = Beijing Capital International Airport
| nativename-a = 北京首都国际机场
| nativename-r = Běijīng Shǒudū Guójì Jīcháng
| image        = Beijing Capital Departure Hall.jpg
| caption      = Beijing Capital Departure Hall
| IATA         = PEK
| ICAO         = ZBAA
| type         = Public
| operator     = [[Civil Aviation Administration of China]]
| city-served  = [[Beijing]]
| location     = [[Chaoyang District, Beijing]]
| hub          = [[Air China]], [[China Southern Airlines]]
| elevation-f  = 116
| elevation-m  = 35
| coordinates  = {{Coord|40|04|48|N|116|35|04|E|type:airport_region:CN|display=inline,title|name=Beijing Capital International Airport}}
| website      = [http://www.bcia.com.cn/ www.bcia.com.cn]
| metric-rwy   = yes
| r1-number    = 18L/36R
| r1-length-m  = 3,800
| r1-length-f  = 12,467
| r1-surface   = [[Asphalt]]
| r2-number    = 18R/36L
| r2-length-m  = 3,200
| r2-length-f  = 10,499
| r2-surface   = Asphalt
}}
Dallas-Fort Worth International Airport
IATA: DFWICAO: KDFWFAA LID: DFW
Summary
Airport type Public
Owner City of Dallas

City of Fort Worth

Operator DFW Airport Board
Serves Dallas/Fort Worth
Hub for American Airlines, American Eagle Airlines
Elevation AMSL 607 ft / 185 m
Coordinates 32°53′49″N 097°02′17″W / 32.89694°N 97.03806°W / 32.89694; -97.03806
Website www.dfwairport.com
Map
DFW is located in Texas
DFW
DFW
Location within Texas
Runways
Direction Length Surface
ft m
13L/31R 9,000 2,743 Concrete
13R/31L 9,301 2,835 Concrete
17C/35C 13,401 4,085 Concrete
17L/35R 8,500 2,591 Concrete
17R/35L 13,401 4,085 Concrete
18L/36R 13,400 4,084 Concrete
18R/36L 13,400 4,084 Concrete
Helipads
Number Length Surface
ft m
H1 158 48 Concrete
Statistics (2005)
Passengers 59,176,265
Aircraft operations 711,878
Metric tonnes of cargo 741,432
Sources: FAA[3], airport website[4].

Dallas-Fort Worth International Airport

{{Infobox airport
| name         = Dallas-Fort Worth International Airport
| image        = Dfw_airport.jpg
| IATA         = DFW
| ICAO         = KDFW
| FAA          = DFW
| type         = Public
| owner        = City of [[Dallas, Texas|Dallas]]
City of [[Fort Worth, Texas|Fort Worth]]
| operator     = DFW Airport Board
| city-served  = [[Dallas/Fort Worth Metroplex|Dallas/Fort Worth]]
| hub          = [[American Airlines]], [[American Eagle Airlines]]
| metric-elev  =
| elevation-f  = 607
| elevation-m  = 185
| website      = [http://www.dfwairport.com/ www.dfwairport.com]
| latd  = 32  | latm  = 53 | lats  = 49 | latNS  = N
| longd = 097 | longm = 02 | longs = 17 | longEW = W
| coordinates_region     = US-TX
| pushpin_map            = USA Texas
| pushpin_map_caption    = Location within Texas
| pushpin_label          = DFW
| metric-rwy   =
| r1-number    = 13L/31R
| r1-length-f  = 9,000
| r1-length-m  = 2,743
| r1-surface   = [[Concrete]]
| r2-number    = 13R/31L
| r2-length-f  = 9,301
| r2-length-m  = 2,835
| r2-surface   = Concrete
| r3-number    = 17C/35C
| r3-length-f  = 13,401
| r3-length-m  = 4,085
| r3-surface   = Concrete
| r4-number    = 17L/35R
| r4-length-f  = 8,500
| r4-length-m  = 2,591
| r4-surface   = Concrete
| r5-number    = 17R/35L
| r5-length-f  = 13,401
| r5-length-m  = 4,085
| r5-surface   = Concrete
| r6-number    = 18L/36R
| r6-length-f  = 13,400
| r6-length-m  = 4,084
| r6-surface   = Concrete
| r7-number    = 18R/36L
| r7-length-f  = 13,400
| r7-length-m  = 4,084
| r7-surface   = Concrete
| h1-number    = H1
| h1-length-f  = 158
| h1-length-m  = 48
| h1-surface   = Concrete
| stat-year    = 2005
| stat1-header = Passengers
| stat1-data   = 59,176,265
| stat2-header = Aircraft operations
| stat2-data   = 711,878
| stat3-header = Metric tonnes of cargo
| stat3-data   = 741,432
| footnotes    = Sources: FAA<ref>{{FAA-airport|ID=DFW|use=PU|own=PU|site=23710.6*A}}</ref>, airport website<ref>[http://www.dfwairport.com/ Dallas-Fort Worth International Airport], official web site</ref>.
}}
Wright-Patterson Air Force Base


Air Force Materiel Command

National Museum of the United States Air Force
IATA: FFOICAO: KFFOFAA LID: FFO
Summary
Airport type Military: Air Force Base
Operator United States Air Force
Location Dayton, Ohio
In use 1948 - present
Commander
Elevation AMSL 823 ft / 251 m
Coordinates 39°49′34″N 084°02′54″W / 39.82611°N 84.04833°W / 39.82611; -84.04833
Website www.wpafb.af.mil
Map
Wright-Patterson AFB is located in Ohio
Wright-Patterson AFB
Wright-Patterson AFB
Location within Ohio
Runways
Direction Length Surface
ft m
5L/23R 12,601 3,841 PEM
5R/23L 7,000 2,134 Asphalt
Sources: FAA[5], official website[6].

Wright-Patterson Air Force Base

This infobox shows the use of an image and linked text over the blue background in title area. It also makes use of some of the fields used for military airports.

{{Infobox airport
| name         = Wright-Patterson Air Force Base
[[Image:Air Force Materiel Command.png|100px]]<br/>{{smaller|[[Air Force Materiel Command]]}}
| image        = National Museum of the United States Air Force.jpg
| image-width  = 250
| caption      = [[National Museum of the United States Air Force]]
| IATA         = FFO
| ICAO         = KFFO
| FAA          = FFO
| type         = Military: [[Air Force Base]]
| operator     = [[United States Air Force]]
| location     = [[Dayton, Ohio]]
| built        = <!--1948-->
| used         = 1948 - present
| commander    = <div>
* [[General (United States)|Gen.]] Bruce Carlson - [[Air Force Materiel Command]]
* [[General (United States)|Brig. Gen.]] Bruce E. Davis - [[445th Airlift Wing]]
* [[Colonel (United States)|Col.]] Colleen M. Ryan - [[88th Air Base Wing]] and Installation Commander
</div>
| occupants    =
| elevation-f  = 823
| elevation-m  = 251
| website      = [http://www.wpafb.af.mil/ www.wpafb.af.mil]
| latd  =  39 | latm  = 49 | lats  = 34 | latNS  = N
| longd = 084 | longm = 02 | longs = 54 | longEW = W
| coordinates_region     = US-OH
| pushpin_map            = USA Ohio
| pushpin_map_caption    = Location within Ohio
| pushpin_label          = Wright-Patterson AFB
| r1-number    = 5L/23R
| r1-length-f  = 12,601
| r1-length-m  = 3,841
| r1-surface   = [[Porous European Mix|PEM]]
| r2-number    = 5R/23L
| r2-length-f  = 7,000
| r2-length-m  = 2,134
| r2-surface   = [[Asphalt]]
| footnotes    = Sources: FAA<ref>{{FAA-airport|ID=FFO|use=PR|own=MA|site=17827.*A}}</ref>, official website<ref>[http://www.wpafb.af.mil/ Wright-Patterson Air Force Base] (official site)</ref>.
}}
Buri Ram Airport
ท่าอากาศยานบุรีรัมย์
IATA: BFVICAO: VTUO
Summary
Airport type Public
Serves Buri Ram, Thailand
Elevation AMSL 590 ft / 180 m
Coordinates 15°13′46″N 103°15′04″E / 15.22944°N 103.25111°E / 15.22944; 103.25111
Map

Lua error in Module:Location_map at line 464: Unable to find the specified location map definition. Neither "Module:Location map/data/Thailand" nor "Template:Location map Thailand" exists.Location of airport in Thailand

Runways
Direction Length Surface
m ft
04/22 2,100 6,890 Asphalt
Source: AIP Thailand[7]

Buri Ram Airport

This infobox shows the use optional parameters for the location/pushpin map.

{{Infobox airport
| name         = Buri Ram Airport
| nativename-a = {{lang|th|ท่าอากาศยานบุรีรัมย์}}
| IATA         = BFV
| ICAO         = VTUO
| type         = Public
| city-served  = [[Buri Ram]], [[Thailand]]
| elevation-f  = 590
| latd  =  15 | latm  = 13 | lats  = 46 | latNS  = N
| longd = 103 | longm = 15 | longs = 04 | longEW = E
| coordinates_region     = TH
| pushpin_map            = Thailand
| pushpin_mapsize        = 220x300 <!--limit height to 300px-->
| pushpin_map_caption    = Location of airport in Thailand
| pushpin_image          = Thailand location map Topographic.png
| pushpin_label          = <span style="color:yellow; font-weight:bold; font-size:larger; text-shadow: black 0.1em 0.1em 0.2em">BFV</span>
| pushpin_label_position = bottom
| pushpin_mark           = Yellow_pog.svg
| pushpin_marksize       = 11
| metric-rwy   = y
| r1-number    = 04/22
| r1-length-m  = 2100
| r1-surface   = Asphalt
| footnotes    = Source: [[Aeronautical Information Publication|AIP]] Thailand<ref name="AIP">{{cite web | url = http://www.aisthai.go.th/webais/pdf/AERONAUTICALCHARTS/VTUO.pdf | title = VTUO – BURI RAM | format = [[PDF]] | publisher = [http://www.aisthai.go.th/ AIP Thailand] | accessdate = 20 August 2012}}</ref>
}}

References for examples

[àtúnṣe àmìọ̀rọ̀]

The HTML mark up produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue article across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

If the place or venue has an "established", "founded", "opened" or similar date, use {{Start date}} (unless the date is before 1583 CE); if it has a URL, use {{Url}}.

hCard uses HTML classes including:

  • adr
  • agent
  • category
  • county-name
  • extended-address
  • fn
  • label
  • locality
  • nickname
  • note
  • org
  • region
  • street-address
  • url
  • vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

  • geo
  • latitude
  • longitude

Please do not rename or remove these classes; nor collapse nested elements which use them.

When giving coordinates, please don't be overly precise.