Surface Prep

Always ensure the surface is clean of contaminants and dust. Sanding any surface too smoothly can reduce adhesion and create application issues like orange peel.

Raw Wood

Sand with no finer than 220 grit.

Pre‐finished Wood

Clean using 50/50 mix of denatured alcohol and water with maroon non‐woven pad. Sand with fine (220‐320) foam sanding pad or maroon non‐woven pad. Prime with GF Stain Blocker.

Other Substrates

Can be used with proper priming and/or painting. Always test first.

Sanding Between Coats

Using fine (220‐320) foam sanding pad or gray non‐woven pad.

System Recommendations

For any surface with potential for tannin/ color bleed, prime with GF Stain Blocker. Prime with GF White Undercoat if tannin/color bleed is not a concern.