Arduino Quick Start
2. Devices & Examples
3. M5Unified
5. Extensions & Examples
Atom DTU
Hat
Atom Button
- Functions
read
Description:
Reads the button state: 0, released; 1, pressed
Syntax:
uint8_t read();Example:
#include <M5Atom.h> void setup() { M5.begin();} void loop() { Serial.println(M5.Btn.read()); //Open the serial monitor in Arduino, set the baud rate to 115200 to see the read button state delay(20);}lastChange
Syntax:
uint32_t lastChange();Description:
Returns the time of the last state change
1. The returned time starts counting from the moment the Atom is initialized, in milliseconds
Example:
#include <M5Atom.h> void setup() { M5.begin();} void loop() { M5.update(); Serial.printf("The last change at %d ms /n",M5.Btn.lastChange()); //Serial output of the last time the button state changed}isPressed
Description:
Returns the button pressed state: returns true if the button is pressed; otherwise, returns false
Syntax:
uint8_t isPressed();Example:
#include <M5Atom.h> void setup() { M5.begin();} void loop() { M5.update(); //Add M5.update() to read the button state, details please see System if (M5.Btn.isPressed()) { //If the button is pressed Serial.println("Button is pressed."); } delay(20);}wasPressed
Description:
Returns the button pressed state: if the button is pressed, it returns true only once; otherwise, it returns false
Syntax:
uint8_t wasPressed();Example:
#include <M5Atom.h> void setup() { M5.begin();} void loop() { M5.update(); if (M5.Btn.wasPressed()) { //If the button is pressed Serial.println("Button is pressed."); } delay(20);}pressedFor
Description:
Returns the button pressed state: returns true if the button is pressed for more than the specified time; otherwise, returns false
Syntax:
uint8_t pressedFor(uint32_t ms);| Parameter | Type | Description |
|---|---|---|
| ms | uint32_t | Button pressed time (milliseconds) |
Example:
#include <M5Atom.h> void setup() { M5.begin();} void loop() { M5.update(); if (M5.Btn.pressedFor(2000)) { //If the button is pressed for more than 2 seconds Serial.println("Button A was pressed for more than 2 seconds."); delay(1000); }}isReleased
Description:
Returns the button release state: returns true if the button is released; otherwise, returns false
Syntax:
uint8_t isPressed();Example:
#include <M5Atom.h> void setup() { M5.begin();} void loop() { M5.update(); //Add M5.update() to read the button state, details please see System if (M5.Btn.isReleased()) { //If the button is released Serial.println("Button is released."); } delay(20);}releasedFor
Description:
Returns the button release state: returns true if the button is released for more than the specified time; otherwise, returns false
Syntax:
uint8_t releasedFor(uint32_t ms);| Parameter | Type | Description |
|---|---|---|
| ms | uint32_t | Button release time (milliseconds) |
Example:
#include <M5Atom.h> void setup() { M5.begin();} void loop() { M5.update(); if (M5.Btn.releasedFor(2000)) { //If the button is released for more than 2 seconds Serial.println("Button A was released for more than 2 seconds."); delay(1000); }}wasReleased
Description:
Returns the button release state: if the button is released, it returns true only once; otherwise, it returns false
Syntax:
uint8_t wasReleased();Example:
#include <M5Atom.h> void setup() { M5.begin();} void loop() { M5.update(); if (M5.Btn.wasReleased()) { //If the button is released Serial.println("Button is Released."); } delay(20);}wasReleasefor
Syntax:
uint8_t wasReleasefor(uint32_t ms);Description:
Returns the button release state: if the button is pressed and then released after more than the specified time, it returns true only once; otherwise, returns false
| Parameter | Type | Description |
|---|---|---|
| ms | uint32_t | Button pressed time (milliseconds) |
Example:
#include <M5Atom.h> void setup() { M5.begin();} void loop() { M5.update(); if (M5.Btn.wasReleasefor(3000)) { //If the button is pressed for 3s and then released Serial.println("clear screen"); }}