Applied Nano

Wound healing is rarely seen as a problem in healthy individuals; however, under certain pathophysiological conditions, this process can be impaired, leading to the emergence of chronic wounds, which are themselves a serious public health problem. This work aimed to review the most important recent literature on the use of nanoparticles of Ag, Au, and Zn produced from plant extracts and their application as healing agents. To that end, we provide an insight into the pathophysiology of wound healing and the main routes to obtaining metallic nanoparticles. The methodology of synthesis, which is part of the so-called green synthesis, has been the focus of several studies on the use of medicinal plants as a substrate to produce silver, gold, and zinc nanoparticles. Their use as wound healing agents is closely related to their natural antimicrobial, anti-inflammatory, and cicatrizing properties. Finally, we address in vitro and in vivo studies on the efficiency of metallic nanoparticles (MNPs) synthesized from plant extracts and applied to wound healing in different pharmaceutical forms. For instance, the excellent wound contraction rates obtained from silver and gold NPs, respectively, were obtained from Euphorbia milii (92%) and Plectranthus aliciae (almost 97%) extracts in in vivo and in vitro analyses. Based on the satisfactory results, we find that MNPs are a potential therapeutic alternative compared to traditional synthetic healing agents and foresee the production of new pharmaceutical drugs. Full article

Recent improvements in advanced technology for toxic chemical remediation have involved the application of titanium oxide nanoparticles as a photocatalyst. However, the large energy bandgap associated with titanium oxide nanoparticles (3.0–3.20 eV) is a limitation for their application as a photocatalyst within the solar spectrum. Various structural modification methods have led to significant reductions in the energy bandgap but not without their disadvantages, such as electron recombination. In the current investigation, biochar was made from the leaves of an invasive plant (Acacia saligna) and subsequently applied as a support in the synthesis of titanium oxide nanoparticles. The characterization of biochar-supported titanium oxide nanoparticles was performed using scanning electron microscopy, Fourier transformer infrared, X-ray diffraction, and Brunauer–Emmett–Teller analyses. The results showed that the titanium oxide was successfully immobilized on the biochar’s external surface. The synthesized biochar-supported titanium oxide nanoparticles exhibited the phenomenon of small hysteresis, which represents the typical type IV isotherm attributed to mesoporous materials with low porosity. Meanwhile, X-ray diffraction analysis revealed the presence of a mixture of rutile and anatase crystalline phase titanium oxide. The synthesis of biochar-supported titanium oxide nanoparticles was highly efficient in the degradation of Orange II Sodium dye under solar irradiation. Moreover, 83.5% degradation was achieved when the biochar-supported titanium oxide nanoparticles were used as photocatalysts in comparison with the reference titanium oxide, which only achieved 20% degradation. Full article

Toxic metal wastewater is a challenge for exposed terrestrial and aquatic environments, as well as the recyclability of the water, prompting inputs for the development of promising treatment methods. Consequently, the rGO/ZnONP nanocomposite was synthesized at room temperature for four hours and was tested for the adsorption of cadmium and lead in wastewater. The optimized nanocomposite had the lowest band gap energy (2.69 eV), and functional group interactions were at 516, 1220, 1732, 3009, and 3460 cm⁻¹. The nanocomposite showed good ZnO nanoparticle size distribution and separation on rGO surfaces. The nanocomposite’s D and G band intensities were almost the same, constituting the ZnO presence on rGO from the Raman spectrum. The adsorption equilibrium time for cadmium and lead was reached within 10 and 90 min with efficiencies of ~100%. Sips and Freundlich best fitted the cadmium and lead adsorption data (R² ~ 1); therefore, the adsorption was a multilayer coverage for lead and a mixture of heterogenous and homogenous coverage for cadmium adsorption. Both adsorptions were best fitted by the pseudo-first-order model, suggesting the multilayer coverage dominance. The adsorbent was reused for three and seven times for cadmium and lead. The nanocomposite showed selectivity towards lead (95%) and cadmium (100%) in the interfering wastewater matrix. Conclusively, the nanocomposite may be embedded within upcoming lab-scale treatment plants, which could lead to further upscaling and it serving as an industrial wastewater treatment material. Full article

Nano-encapsulation and conjugation are the main strategies employed for drug delivery. Nanoparticles help improve encapsulation and targeting efficiency, thus optimizing therapeutic efficacy. Through nanoparticle technology, replacement of a defective gene or delivery of a new gene into a patient’s genome has become possible. Lipid nanoparticles (LNPs) loaded with genetic materials are designed to be delivered to specific target sites to enable gene therapy. The lipid shells protect the fragile genetic materials from degradation, then successfully release the payload inside of the cells, where it can integrate into the patient’s genome and subsequently express the protein of interest. This review focuses on the development of LNPs and nano-pharmaceutical techniques for improving the potency of gene therapies, reducing toxicities, targeting specific cells, and releasing genetic materials to achieve therapeutic effects. In addition, we discuss preparation techniques, encapsulation efficiency, and the effects of conjugation on the efficacy of LNPs in delivering nucleic acid materials. Full article

ZnS is a II-VI semiconductor with a wide bandgap. ZnS-based nanomaterials have been produced in a variety of morphologies with unique properties and characteristic features. An extensive collection of research activities is available on various synthetic methodologies to produce such a wide variety of ZnS-based nanomaterials. In this comprehensive review, we thoroughly covered all the different synthetic techniques employed by researchers across the globe to produce zero-dimensional, one-dimensional, two-dimensional, and three-dimensional ZnS-based nanomaterials. Depending on their morphologies and properties, ZnS-based nanomaterials have found many applications, including optoelectronics, sensors, catalysts, batteries, solar cells, and biomedical fields. The properties and applications of ZnS-based nanostructures are described, and the scope of the future direction is highlighted. Full article

The leaves of the Murraya koenigii aromatic plant contain various specific phytochemicals, including lutein, β-carotene, vitamin C, nicotinic acids, and other polyphenols, which act as reducing agents to produce metallic nanoparticles from their respective precursors. In this study, we report the green synthesis of iron–cobalt bimetallic nanoparticles (Fe–Co BMNPs) using natural resources of reducing and capping agents from aqueous extract of Murraya koenigii leaves. The synthesized Fe–Co BMNPs were characterized using SEM, EDS, BET surface area, TGA, XRD, TEM, and VSM techniques, revealing their crystalline structure with a surface area of 83.22 m² g⁻¹ and particle sizes <50 nm. Furthermore, the photocatalytic ability of the synthesized Fe–Co BMNPs was examined concerning methylene blue dye (MBD) aqueous solution. The synthesized Fe–Co BMNPs exhibited promising potential for dye removal from aqueous solution in acidic and basic medium (>97% of 10 mg L⁻¹). Full article

This paper presents the continuation of experimental investigations conducted by the present authors to measure and compare the thermal and fluid dynamic performance of a residential hydronic air coil using nanofluids. The prior experiments were limited to testing only one volumetric concentration (1%) of aluminum oxide (Al₂O₃) nanofluid. They compared it with the base fluid, a 60% ethylene glycol/40% water mixture by mass (60% EG). The original tests revealed some deficiencies in the experimental setup, which was subsequently revised and improved. This paper summarizes the results of experiments from the improved test bed using three concentrations of Al₂O₃ nanofluids: 1, 2, and 3% volumetric concentrations prepared with an average particle size of 45 nm in a 60% EG dispersion. The test bed in these experiments simulates a small air handling system typical of heating, ventilation, and air conditioning (HVAC) applications in cold regions. Entering conditions for the air and liquid were selected to emulate typical commercial air handling systems operating in cold climates. Contrary to previous findings, our test results revealed that nanofluids did not perform as well as expected. Prior predictions from many analytical and numerical studies had promised significant performance gain. The performance of the 1% nanofluid was generally equal to that of the base fluid under identical inlet conditions. However, the performance of the 2% and 3% nanofluids was considerably lower than that of the base fluid. The higher concentration nanofluids exhibited heat rates up to 14.6% lower than the 60% EG and up to 44.3% lower heat transfer coefficient. The 1% Al₂O₃/60% EG exhibited a 100% higher pressure drop across the coil than the base fluid, considering equal heat output. This performance degradation was attributed to the inability to maintain nanofluid dispersion stability, agglomeration, and subsequent decline in the thermophysical properties. Full article

Understanding the role of oxygen vacancies in the phase transformation of metal oxide nanomaterials is fundamental to design more efficient opto-electronic devices for a variety of applications, including sensing, spintronics, photocatalysis, and photo-electrochemistry. However, the structural mechanisms behind the phase transformation in reducible oxides remain poorly described. Here, we compare P25 and black TiO₂ during the thermal anatase-to-rutile transformation using in situ synchrotron powder diffraction. The precise measurement of the phase fractions, unit cell parameters, and Ti-O bond sheds light on the phase transformation dynamics. Notably, we observe distinct temperature-dependent shifts in the relative phase fractions of anatase and rutile in both materials highlighting the role of the oxygen vacancy in promoting the phase transformation. We employ bond valence concepts for structural modeling, revealing unique trends in temperature evolution of Ti-O distances of black rutile, confirming that this TiO₂ phase is preferentially reduced over anatase. These findings not only enhance our understanding of phase transitions in TiO₂ but also open new ways for the design of advanced photocatalytic materials through targeted phase control. Full article

This work presents the green synthesis of iron oxide nanoparticles (IONPs) using Baccharis salicifolia extract and their incorporation in mesoporous silica MCM-41, obtaining an MCM-41@IONP composite. The MCM-41@IONP composite was characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), nitrogen adsorption and desorption, scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS). The use of the natural reducing agent Baccharis salicifolia resulted in nanoparticles with an average size of 31 nm. Furthermore, we showcase the application of the MCM-41@IONP nanocomposite in a metal–insulator–semiconductor (MIS) diode, which was fabricated at room temperature. The current–voltage and capacitance–voltage curves of the MIS diode were carefully measured and subjected to detailed analysis. The results demonstrate the potential utility of MCM-41@IONP nanocomposite-based MIS diodes, suggesting their applicability in the design of biosensors or as discrete components in electronic devices. Full article

This computational research study will compare the specific charge capacity (SCC) between lithium ions inserted into crystallized silicon (c-Si) nanowires with that of sodium ions inserted into amorphous silicon (a-Si) nanowires. It will be demonstrated that the potential energy V(r) within a lithium–silicon nanowire supports a coherent energy state model with discrete electron particles, while the potential energy of a sodium–silicon nanowire will be discovered to be essentially zero, and, thus, the electron current that travels through a sodiated silicon nanowire will be modeled as a free electron with wave-like characteristics. This is due to the vast differences in the electric fields of lithiated and sodiated silicon nanowires, where the electric fields are of the order of ${10}^{10}$ V/m and ${10}^{-15}$ V/m, respectively. The main reason for the great disparity in electric fields is the presence of optical amplification within lithium ions and the absence of this process within sodium ions. It will be shown that optical amplification develops coherent optical interactions, which is the primary reason for the surge of specific charge capacity in the lithiated silicon nanowire. Conversely, the lack of optical amplification is the reason for the incoherent optical interactions within sodium ions, which is the reason for the low presence of SCC in sodiated silicon nanowires. Full article

Nanoparticles composed of inorganic boron-containing compounds represent a promising candidate as ¹⁰B carriers for BNCT. This study focuses on the synthesis, characterization, and assessment of the biological activity of composite nanomaterials based on boron carbide (B₄C). Boron carbide is a compelling alternative to borated molecules due to its high volumetric B content, prolonged retention in biological systems, and low toxicity. These attributes lead to a substantial accumulation of B in tissues, eliminating the need for isotopically enriched compounds. In our approach, B₄C nanoparticles were included in composite nanostructures with ultrasmall superparamagnetic nanoparticles (SPIONs), coated with poly (acrylic acid), and further functionalized with the fluorophore DiI. The successful internalization of these nanoparticles in HeLa cells was confirmed, and a significant uptake of ¹⁰B was observed. Micro-distribution studies were conducted using intracellular neutron autoradiography, providing valuable insights into the spatial distribution of the nanoparticles within cells. These findings strongly indicate that the developed nanomaterials hold significant promise as effective carriers for ¹⁰B in BNCT, showcasing their potential for advancing cancer treatment methodologies. Full article

Based on the unique properties of optical Fano resonance and plasmonic-waveguide coupling systems, this paper explores a novel refractive index concentration sensor structure. The sensor structure is composed of a metal–insulator–metal (MIM) waveguide and two identically shaped and sized double-tooth ring couplers (DTR). The performance structure of the nanoscale refractive index sensor with DTR cavity was comprehensively assessed using the finite element method (FEM). Due to the impact of various geometric parameters on the sensing characteristics, including the rotation angles, the widths between the double-tooth rings, and the gaps between the cavity and the waveguide, we identified an optimal novel refractive index sensor structure that boasts the best performance indices. Finally, the DTR cavity sensor achieved a sensitivity of 4137 nm/RIU and Figure of merit (FOM) of 59.1. Given the high complexity and sensitivity of the overall structure, this nanoscale refractive index sensor can be applied to the detection of oil concentration in industrial oil–water mixtures, yielding highly precise results. Full article

We synthesized a boron-doped reduced graphene oxide (BrGO) material characterized by various electrical properties, through simultaneous thermal reduction and doping procedures, using a metal–organic chemical vapor deposition technique. X-ray photoelectron spectroscopy (XPS) was used to study the impact of the doping level on the B bonding in the reduced graphene oxide (rGO) layer that is influenced by the annealing temperature. The synthesized BrGO layer demonstrated a high B concentration with a considerable number of O-B bonds, that were altered by annealing temperatures. This resulted in a decreased work function and the formation of a Schottky contact between the BrGO and n-type Si substrate. Due to the higher proportion of B-C and B-C₃ bonding in the BrGO/Si device than that in the rGO/Si, the decreased Schottky barrier height of the BrGO/n-Si vertical junction photodetector resulted in a higher responsivity. This study showcases a promise of a simple B-doping method in use to alter the electrical characteristics of graphene materials. Full article

Lipid nanoparticles, including liposomes, have emerged as promising vehicles for the delivery of a variety of therapeutics. Several formulations have been approved and are used in medical practice—the COVID-19 mRNA vaccines represent the most recent milestone. Achieving effective oral delivery would elevate the potential of these formulations. Therefore, this study investigates the oral application of mRNA using liposomes as a nanocarrier system. A cyclic cell-penetrating peptide was coupled to the liposomal surface to allow uptake into the intestinal mucosal cells. The liposomes were loaded with mRNA (up to 112 µg/mL) and characterized in terms of their size (Z-average; 135.4 nm ± 1.1 nm), size distribution (polydispersity index (PDI); 0.213 ± 0.007 nm), surface charge (2.89 ± 0.27 mV), structure, lamellarity (multilamellar liposomes), and cargo capacity (>90%). The impact of freeze-drying and long-term storage of liposomal formulations was examined, and in vitro experiments on Caco-2 cells were conducted to evaluate the cytotoxicity of the liposomal formulations and demonstrate the uptake of the liposomes into cells. The efficiency of the formulations could be proven in vitro. When compared to control liposomes and 1,2-dioleoyl-3-trimethylammonium propane (DOTAP)-liposomes, the new formulations exhibited significantly enhanced uptake in Caco-2 cells, an immortalized epithelial cell line. Moreover, the cytocompatibility of the formulations could be proven by the absence of cytotoxic effects on the viability of Caco-2 cells. Hence, this liposomal drug delivery system holds significant promise for the oral delivery of mRNA. Full article

Aluminum nitride (AlN) is a material of growing interest for power electronics, fabrication of sensors, micro-electromechanical systems, and piezoelectric generators. For the latter, the formation of nanowire arrays or nanostructured films is one of the emerging research directions. In the current work, nanostructured AlN films manufactured with normal and glancing angle magnetron sputter depositions have been investigated with scanning and transmission electron microscopy, X-ray diffraction, atomic force microscopy, and optical spectroscopy. Growth of the nanostructures was realized utilizing metal seed particles (Ag, Au, and Al), allowing the control of the nucleation and following growth of AlN. It was demonstrated how variations of seed particle material and size can be used to tune the parameters of nanostructures and morphology of the AlN films. Using normal angle deposition allowed the growth of bud-shaped structures, which consisted of pillars/lamellae with wurtzite-like crystalline structures. Deposition at a glancing angle of 85° led to a film of individual nanostructures located near each other and tilted at an angle of 33° relative to the surface normal. Such films maintained a high degree of wurtzite-like crystallinity but had a more open structure and higher roughness than the nanostructured films grown at normal incidence deposition. The developed production strategies and recipes for controlling parameters of nanostructured films pave the way for the formation of matrices to be used in piezoelectric applications. Full article

This paper evaluated the use of soft-probe scanning electrochemical microscopy complementarily with confocal laser scanning microscopy to study the effects of different antimicrobial agents and treatments on E. coli DH5α biofilm. The antimicrobial agents were sodium azide, silver nanoparticles, and a flashlight. The effects of these agents were monitored by measuring the change in biofilm properties, such as biofilm biomass, live/dead studies, and surface activity. The results showed that sodium azide, silver nanoparticles, and the flashlight effectively killed E. coli biofilms and explained the mode of action for each treatment. Sodium azide was more effective in killing the biofilm after a short treatment time by blocking the ATPase, while silver nanoparticles were more effective at killing the biofilm after longer treatment times through several antibiofilm actions. This work showed that scanning electrochemical microscopy (SECM) is a very valuable tool for studying the effects of antimicrobial agents on biofilms. SECM is a sensitive technique that can be used to monitor the changes in biofilm properties in real-time. Additionally, SECM does not require any sample preparation, which makes it a convenient and efficient technique. Overall, the results of this study could be used to develop new strategies for treating E. coli biofilm infections and provide valuable insights into the use of SECM to study the effects of antimicrobial agents on E. coli biofilms. Full article

The present work proposes the optimization of the co-digestion of vinasse, filter cake, and deacetylation liquor in a continuous reactor by adding iron(III) oxide (Fe₃O₄) nanoparticles (NPs), comparing the results with a previous reactor operation without NPs. Initially, tests were carried out in batches with different NP concentrations, resulting in 5 mg L⁻¹ as the best concentration to be added in the continuous reactor along the increments of the applied organic load rate (OLR). Methane (CH₄) production reached a maximum value of 2.8 ± 0.1 NLCH₄ gVS⁻¹ (normal liter methane per gram of volatile solids), and the organic matter removal reached 71 ± 0.9% in phase VI (OLR of 5.5 gVS L⁻¹ day⁻¹). This production was 90% higher than the reactor co-digestion operation without NPs. The anaerobic digestion (AD) development was stable with stable organic acid (OA) concentrations, indicating the predominance of the propionic acid route to produce CH₄. The main methanogenic Archaea identified was Methanoculleus, indicating that the predominant metabolic route was that of acetate (SAO) coupled with hydrogenotrophic methanogenesis. The use of Fe₃O₄ NPs managed to improve the AD from the first-generation and second-generation (1G2G) ethanol production residues and stimulated microbial community growth, without modifying the preferable metabolic pathways. Full article

Over recent years, the ‘green’ chemistry approach to synthesizing nanoparticles has made significant developments. Because of their unique features, nanoparticles have received a lot of attention. The use of a bioflocculant to promote the environmentally friendly synthesis of copper nanoparticles is described in this paper. Copper nanoparticles were biosynthesized using bioflocculant which was produced from a yeast, Pichia kudriavzevii. The chemical reduction approach was used to synthesize copper nanoparticles (CuNPs) using a bioflocculant as a capping agent. Characterization of the as-synthesized copper nanoparticles was conducted using Fourier transform infrared (FT-IR) spectroscopy, UV-visible spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy dispersive X-ray (EDX). The FT-IR spectra revealed characteristic peaks at 3267, 2956, 1656, 1059, and 511 cm⁻¹ for the bioflocculant, while for the bioflocculant passivated CuNPs, the characteristic peaks were at 3482 (-OH), 3261, 1640, 1059, 580, and 519 cm⁻¹ (Cu-O). These peaks revealed that functional groups such as hydroxyls, amines, and copper oxide bonds were present. The UV-Vis analysis showed surface plasmon resonance (SPR) at an absorbance range of 500–600 nm, with peak maxima at 555 and 575 nm for the as-synthesized CuNPs. The XRD pattern revealed planes such as (200) and (220) at 2θ = 43 and 52°, and the particle size (30 nm) was determined by the Debye–Scherrer equation. The transmission electron microscopy analysis revealed a spherical-shaped particle with an average size of 20 nm. The EDX analysis of the as-synthesized CuNPs revealed the presence of the element Cu, which was not present in the EDX image of the bioflocculant used in the synthesis of the CuNPs; this indicated the success of biosynthesis. Full article