Intercity Express

ICE livery

A notable characteristic of the ICE trains is their colour design, which has been registered by the DB as an aesthetic model and hence is protected as intellectual property.^[9] The trains are painted in Pale Grey (RAL 7035) with a Traffic Red (RAL 3020) stripe on the lower part of the vehicle. The continuous black band of windows and their oval door windows differentiate the ICEs from any other DB train.

The ICE 1 and ICE 2 units originally had an Orient Red (RAL 3031) stripe, accompanied by a Pastel Violet stripe below (RAL 4009, 26 cm wide). These stripes were repainted with the current Traffic Red between 1998 and 2000, when all ICE units were being checked and repainted in anticipation of the EXPO 2000.

The "ICE" lettering uses the colour Agate Grey (RAL 7038), the frame is painted in Quartz Grey (RAL 7039). The plastic platings in the interior all utilise the Pale Grey (RAL 7035) colour tone.

Originally, the ICE 1 interior was designed in pastel tones with an emphasis on mint, following the DB colour scheme of the day. However, ICE 1 trains were refurbished in the mid-2000s and now follow the same design as the ICE 3, which makes heavy usage of indirect lighting and wooden furnishings.

The distinctive ICE design was developed by a team of designers around Alexander Neumeister in the early 1980s and first used on the InterCityExperimental (ICE V). The team around Neumeister then designed the ICE 1, ICE 2, and ICE 3/T/TD. The interior of the trains was designed by Jens Peters working for BPR-Design in Stuttgart. Among others, he was responsible for the heightened roof in the restaurant car and the special lighting. The same team also developed the design for the now discontinued InterRegio trains in the mid-1980s.

Overview

More information Type, Production ...

Type	Production	Numbers built	vmax [km/h]	In service	Status	Image
InterCityExperimental (also ICE/V)	1983–1985	1	350	1985–2000 (measurement and test drives)	retired
ICE 1	1989–1993	60	280	since 1990	58 in service
ICE 2	1995–1997	46	280	since 1996	43 in service
ICE S (also ICE R)	1996	1	280 / 330	since 1997	in service for measurement and test drives
ICE T	1996–2005	71	230	DB: since 1999 ÖBB: 2006–2020	70 in service
DB Class 403 (ICE 3)	1997–2006	50	330	since 2000	49 in service
DB Class 406 (ICE 3M / ICE 3MF)	1997–2006	17	330	since 2000	16 in service (13 with DB, 3 with NS)
Metropolitan	1998–1999	2	220	"ICE" branded: 2004–06/2005, 12/2005–2006, 2009–2021	retired
ICE TD	1998–2000	20	200	2001–2003, 2006–2017	retired, 1 remaining for tests as Advanced Train Lab
Velaro D (DB Class 407, also called ICE 3 by DB)	2009–2012	17	320	since 2013	all in service
ICE 4	2014–2023/24	137	250 / 265	since 2017	all in service
Velaro MS (DB Class 408 / ICE 3neo)[10]	2020–2026 (planned)	22 (of 90 ordered)	320	since 2022	20 in service
ICE L	since 2019	1+ (of 79 on order)[11]	230	from mid-2025 (planned)	undergoing testing

Close

Other/Exported/Special

More information Type, Based on ...

Type	Based on	Image	Status
ICE train North America tour	ICE 1		Exported
Eurotrain	ICE 2 TGV Duplex
ÖBB Class 4011	ICE T
ICE 3M	ICE 3
ICE TD
Advanced TrainLab	ICE TD		Other/Special
British Rail Class 374/Velaro e320	Siemens Velaro		Exported
TCDD HT80000
Velaro Egypt			Pending

Close

First generation

The first ICE trains were the trainsets of ICE 1 (power cars: Class 401), which came into service in 1989. The first regularly scheduled ICE trains ran from 2 June 1991 from Hamburg-Altona via Hamburg Hbf–Hannover Hbf–Kassel-Wilhelmshöhe–Fulda–Frankfurt Hbf–Mannheim Hbf and Stuttgart Hbf toward München Hbf at hourly intervals^[12] on the new ICE line 6. The Hanover-Würzburg line and the Mannheim-Stuttgart line, which had both opened the same year, were hence integrated into the ICE network from the very beginning.

Due to the lack of trainsets in 1991 and early 1992, the ICE line 4 (Bremen Hbf–Hannover Hbf–Kassel-Wilhelmshöhe–Fulda–Würzburg Hbf–Nürnberg Hbf–München Hbf) could not start operating until 1 June 1992. Prior to that date, ICE trainsets were used when available and were integrated in the Intercity network and with IC tariffs.

In 1993, the ICE line 6's terminus was moved from Hamburg to Berlin (later, in 1998, via the Hanover-Berlin line and the former IC line 3 from Hamburg-Altona via Hannover Hbf–Kassel-Wilhelmshöhe–Fulda–Frankfurt Hbf–Mannheim Hbf–Karlsruhe Hbf–Freiburg Hbf to Basel SBB was upgraded to ICE standards as a replacement).

Second generation

From 1997, the successor, the ICE 2 trains pulled by Class 402 powerheads, was put into service. One of the goals of the ICE 2 was to improve load balancing by building smaller train units which could be coupled or detached as needed.

These trainsets were used on the ICE line 10 Berlin-Cologne/Bonn. However, since the driving van trailers of the trains were still awaiting approval, the DB joined two portions (with one powerhead each) to form a long train, similar to the ICE 1. Only from 24 May 1998 were the ICE 2 units fully equipped with driving van trailers and could be portioned on their run from Hamm via either Dortmund Hbf–Essen Hbf–Duisburg Hbf–Düsseldorf Hbf or Hagen Hbf–Wuppertal Hbf–Solingen-Ohligs.

In late 1998, the Hanover–Berlin high-speed railway was opened as the third high-speed line in Germany, cutting travel time on line 10 (between Berlin and the Ruhr valley) by 2½ hours.

The ICE 1 and ICE 2 trains' loading gauge exceeds that recommended by the international railway organisation UIC. Even though the trains were originally to be used only domestically, some units are licensed to run in Switzerland and Austria. Some ICE 1 units have been equipped with an additional smaller pantograph to be able to run on the different Swiss overhead wire geometry. All ICE 1 and ICE 2 trains are single-voltage 15 kV AC, which restricts their radius of operation largely to the German-speaking countries of Europe. ICE 2 trains can run at a top speed of 280 km/h (174 mph).

Third generation

To overcome the restrictions imposed on the ICE 1 and ICE 2, their successor, the ICE 3, was built to a smaller loading gauge to permit usability throughout the entire European standard gauge network, with the sole exception being the UK's domestic railway network. Unlike their predecessors, the ICE 3 units are built not as trains with separate passenger and power cars, but as electric multiple units with underfloor motors throughout. This also reduced the load per axle and enabled the ICE 3 to comply with the pertinent UIC standard.

Initially two different classes were developed: the Class 403 (domestic ICE 3) and the Class 406 (ICE 3M), the M standing for Mehrsystem (multi-system). Later came Class 407 and Class 408. The trains were labelled and marketed as the Velaro by their manufacturer, Siemens.

Just like the ICE 2, the ICE 3 and the ICE 3M were developed as short trains (when compared to an ICE 1), and are able to travel in a system where individual units run on different lines, then being coupled to travel together. Since the ICE 3 trains are the only ones able to run on the Köln-Frankfurt high-speed line with its 4.0% incline at the allowed maximum speed of 300 km/h, they are used predominantly on services that utilise this line.

In 2009 Deutsche Bahn ordered another 16 units – worth € 495 million – for international traffic, especially to France.

The Erfurt–Leipzig/Halle high-speed railway, which opened in December 2015, is one of three lines in Germany (the others being the Nuremberg-Ingolstadt high-speed rail line and Cologne–Frankfurt high-speed rail line) that are equipped for a line speed of 300 km/h (190 mph). Since only 3rd generation ICE trains can travel at this speed, the ICE line 41, formerly running from Essen Hbf via Duisburg Hbf–Frankfurt Südbf to Nürnberg Hbf, was extended over the Nuremberg-Ingolstadt high-speed rail line and today the service run is Oberhausen Hbf–Duisburg Hbf–Frankfurt Hbf–Nürnberg Hbf–Ingolstadt Hbf–München Hbf.

The ICE 3 runs at speeds up to 320 km/h (200 mph) on the LGV Est railway Strasbourg–Paris in France.

A new generation ICE 3, Class 407, is part of the Siemens Velaro family with the model designation Velaro D. It currently runs on many services in Germany and through to other countries like France. Initially this train type was meant to execute the planned Deutsche Bahn services through the Channel Tunnel to London. As the trains had not received a certification for running in Belgium and due to the competition of budget airlines the London service was cancelled.^[13][14]

In 2020 Deutsche Bahn placed an order with Siemens for 30 trains, and options for another 60, of the Velaro design and based on the previously procured ICE Class 407.^[15] Referenced by Siemens as Velaro MS ("multi-system"), these trains are called ICE 3neo by Deutsche Bahn and classified as 408. The trains are designed for operation at 320 km/h and were deployed at the end of 2022 on routes that use the Cologne – Frankfurt high speed line which is designed for operation at 300 km/h. After a production time of only 12 months including trial runs the first train was presented to journalists in February of 2022. At that occasion the order was increased by 43 trainsets, with all 73 trains supposed to be in service by early 2029.^[16] In May of 2023 Deutsche Bahn announced that it was calling the last 17 trains from the option, bringing the total order up to 90 trains.^[11]

Fourth generation

Procurement of ICx trainsets started c. 2008 as replacements for locomotive hauled InterCity and EuroCity train services - the scope was later expanded to include replacements for ICE 1 and ICE 2 trainsets. In 2011 Siemens was awarded the contract for 130 seven car intercity train replacements, and 90 ten car ICE train replacements, plus further options - the contract for the ten car sets was modified in 2013 to expand the trainset length to twelve vehicles. The name ICx was used for the trains during the initial stages of the procurement; in late 2015 the trains were rebranded ICE 4, at the unveiling of the first trainset, and given the class designation 412 by Deutsche Bahn.

Two pre-production trainsets were manufactured and used for testing prior to the introduction of the main series.

ICE T and ICE TD

Simultaneously with the ICE 3, Siemens developed trains with tilting technology, using much of the ICE 3 technical design. The class 411 (seven cars) and 415 (five cars) ICE T EMUs and class 605 ICE TD DMUs (four cars) were built with a similar interior and exterior design. They were specially designed for older railway lines not suitable for high speeds, for example the twisting lines in Thuringia. ICE-TD has diesel traction. ICE-T and ICE-TD can be operated jointly, but this is not done routinely.

ICE TD

Main article: ICE TD

Deutsche Bahn ordered 20 units of ICE-T with diesel engines in 2001, called Class 605 ICE-TD. The ICE-TD was intended for certain routes without electric overhead cables such as Dresden-Munich and Munich-Zürich lines. However, the Class 605 trains (ICE-TD) experienced many technical issues and unanticipated escalation in operating cost due to the diesel fuel being fully taxed in Germany. They were taken off revenue service shortly after delivery. During the 2006 FIFA World Cup, the ICE-TD trains were pressed temporarily into supplementary service for transporting fans between cities in Germany.

At the end of 2007, ICE-TD trains were put into revenue service for the lines between Hamburg and Copenhagen as well as Hamburg and Aarhus. A large part of the Danish railway network had not been electrified so DSB (Danish State Railways) used the diesel-powered trains. When DSB ordered the new IC4 train sets, the company did not anticipate the long delay with the delivery and the technical issues with the train sets. To compensate for the shortage of available trains, DSB leased the ICE-TD while the delivery and technical issues with IC4 were being addressed. The operating cost was much lower due to the lower fuel tax in Denmark. After the issues with IC4 were resolved, the ICE-TD fleet was removed from revenue service and stored.

Deutsche Bahn retired the entire ICE TD fleet in 2018.^[17]

Differences in train layouts

Trainset numbers

While every car in an ICE train has its own unique registration number, the trains usually remain coupled as fixed trainsets for several years. For easier reference, each has been assigned a trainset number that is printed over each bogie of every car. These numbers usually correspond with the registration numbers of the powerheads or cab cars.

Interior equipment

The ICE trains adhere to a high standard of technology: all cars are fully air-conditioned and nearly every seat features a headphone jack which enables the passenger to listen to several on-board music and voice programmes as well as several radio stations. Some seats in the 1st class section (in some trains also in 2nd class) are equipped with video displays showing movies and pre-recorded infotainment programmes. Each train is equipped with special cars that feature in-train repeaters for improved mobile phone reception as well as designated quiet zones where the use of mobile phones is discouraged. The newer ICE 3 trains also have larger digital displays in all coaches, displaying, among other things, Deutsche Bahn advertising, the predicted arrival time at the next destination and the current speed of the train.

The ICE 1 was originally equipped with a passenger information system based on BTX, however this system was eventually taped over and removed in the later refurbishment. The ICE 3 trains feature touch screen terminals in some carriages, enabling travellers to print train timetables. The system is also located in the restaurant car of the ICE 2.

The ICE 1 fleet saw a major overhaul between 2005 and 2008, supposed to extend the lifetime of the trains by another 15 to 20 years. Seats and the interior design were adapted to the ICE 3 design, electric sockets were added to every seat, the audio and video entertainment systems were removed and electronic seat reservation indicators were added above the seats. The ICE 2 trains have been undergoing the same procedure since 2010.

ICE 2 trains feature electric sockets at selected seats, ICE 3 and ICE T trains have sockets at nearly every seat.

The ICE 3 and ICE T are similar in their interior design, but the other ICE types differ in their original design. The ICE 1, the ICE 2 and seven-car ICE T (Class 411) are equipped with a full restaurant car. The five-car ICE T (Class 415) and ICE 3 however, have been designed without a restaurant, they feature a bistro coach instead. Since 1 October 2006, smoking is prohibited in the bistro coaches, similar to the restaurant cars, which have always been non-smoking.

All trains feature a toilet for disabled passengers and wheelchair spaces. The ICE 1 and ICE 2 have a special conference compartment whilst the ICE 3 features a compartment suitable for small children. The ICE 3 and ICE T omit the usual train manager's compartment and have an open counter named "ServicePoint" instead.

An electronic display above each seat indicates the locations between which the seat has been reserved. Passengers without reservations are permitted to take seats with a blank display or seats with no reservation on the current section.

Maintenance

The maintenance schedule of the trains is divided into seven steps:

1. Every 4,000 kilometres, an inspection taking about 1½ hours is undertaken. The waste collection tanks are emptied and fresh water tanks are refilled. Acute defects (e.g. malfunctioning doors) are rectified. Safety tests are also conducted. These include checking the pantograph pressure, cleaning and checking for fissures in the rooftop insulators, inspecting transformers and checking the pantograph's current collector for wear. The wheels are also checked in this inspection.
2. Every 20,000 kilometres, a 2½ hour inspection is conducted, called Nachschau. In this inspection, the brakes, the Linienzugbeeinflussung systems and the anti-lock brakes are checked.
3. After 80,000 kilometres, the train undergoes the Inspektionsstufe 1. During the two modules, each lasting eight hours, the brakes receive a thorough check, as well as the air conditioning and the kitchen equipment. The batteries are checked, as well as the seats and the passenger information system.
4. Once the train has reached 240,000 kilometres, the Inspektionsstufe 2 mandates a check of the electric motors, the bearings and the driveshafts of the bogies and the couplers. This inspection is usually carried out in two modules taking eight hours each.
5. About once a year (when reaching 480,000 km), the Inspektionsstufe 3 takes place, at three times eight hours each. In addition to the other checkup phases, it includes checks on the pneumatics systems, and the transformer cooling. Maintenance work is performed inside the passenger compartment.
6. The 1st Revision is carried out after 1.2 million km. It includes a thorough check of all components of the train and is carried out in two five-day segments.
7. The seventh and final step is the 2nd Revision, which happens when reaching 2.4 million kilometres. The bogies are exchanged for new ones and many components of the train are disassembled and checked. This step also takes two five-day segments.

Maintenance on the ICE trains is carried out in special ICE workshops located in Basel, Berlin, Cologne, Dortmund, Frankfurt, Hamburg, Leipzig^[21] and Munich. The train is worked upon at up to four levels at a time and fault reports are sent to the workshops in advance by the on-board computer system to minimize maintenance time.

Lines under construction

• Stuttgart–Wendlingen high-speed railway (new line, 250 km/h, under construction)
• Vogelfluglinie (partially new line, partially being upgraded)
  • Lübeck–Hamburg railway (German part, to be upgraded to reach 200 km/h)
  • Lübeck–Puttgarden railway (German part, to be electrified^[22] to reach 200 km/h up from the current 160 km/h,^[23] under construction)
  • Fehmarn Belt Fixed Link (tunnel part, will replace the Rødby–Puttgarden ferry, 200 km/h, under construction, completion expected in 2028)^[24]
  • Sydbanen (Danish part, new tracks to be laid by 2021, to be electrified to reach 200 km/h by 2024, under construction)^[25]

Lines planned

• Frankfurt–Mannheim high-speed railway (new line, 300 km/h, in planning)
• Hanau-Gelnhausen high-speed railway (new line, 300 km/h, in planning)
• Dresden‒Prague high-speed line
• Hanover-Bielefeld high-speed railway [de] (new line, 300 km/h, in planning)
• Nuremberg-Würzburg high-speed railway (new line, 300 km/h, in planning)
• Hanover-Hamburg high-speed railway/Hanover-Bremen high-speed railway (Y-shaped, partially new line, 160 and 300 km/h on new sections, 160 km/h on an existing section, in planning)
• Fulda–Eisenach high-speed railway 250 km/h 2030 52 km
• Fulda–Frankfurt (parallel new) high-speed railway 250 km/h 2035 80 km
• Ostermünchen–Brannenburg–Austrian border high-speed railway [de]

North–south connections

The network's main backbone consists of six north–south lines:

1. from Hamburg-Altona via Hamburg, Hannover, Kassel, Fulda, Frankfurt, Mannheim, Karlsruhe and Freiburg to Basel (line 20) or continuing from Mannheim to Stuttgart (line 22)
2. from Hamburg-Altona and Hamburg and from Bremen to Hannover (where portions are joined) and via Kassel, Fulda and Würzburg to Nuremberg and via Ingolstadt to Munich (line 25)
3. from Hamburg-Altona via Hamburg, Berlin-Spandau, Berlin, Berlin Südkreuz, Leipzig or Halle, Erfurt to Nuremberg and via Augsburg or Ingolstadt to Munich (lines 18, 28 and 29) or continuing from Erfurt via Fulda, Frankfurt, Stuttgart, Ulm and Augsburg to Munich (line 11)
4. from Berlin via Berlin-Spandau, Braunschweig, Kassel, Fulda, Frankfurt, Mannheim, Karlsruhe and Freiburg to Basel (line 12) or via Fulda and Frankfurt Süd to Frankfurt Airport (line 13)
5. from Amsterdam or Dortmund via Duisburg, Düsseldorf, Cologne and Frankfurt Airport to Mannheim and either via Karlsruhe and Freiburg to Basel (line 43) or via Stuttgart, Ulm and Augsburg to Munich (lines 42 and 47)
6. from Essen via Cologne, Frankfurt, Würzburg, Nuremberg and Ingolstadt to Munich (line 41)

(Also applies to trains in the opposite directions, taken from 2024 network map)

East–west connections

Furthermore, the network has three main east–west thoroughfares:

1. from Berlin Gesundbrunnen via Berlin, Hannover, Bielefeld to Hamm (where train portions are split) and continuing either via Dortmund, Essen, Duisburg and Düsseldorf to Cologne/Bonn Airport or via Hagen and Wuppertal to Cologne (10, 19)
2. from Dresden via Leipzig, Erfurt, Fulda, Frankfurt, Frankfurt Airport and Mainz to Wiesbaden (50)
3. from Karlsruhe via Stuttgart, Ulm, and Augsburg to Munich (60)

(Also applies to trains in the opposite directions, taken from 2023 network map)

German branch lines

Some train lines extend past the core network and branch off to serve the following connections:

1. from Berlin to Rostock (line 28, individual services)
2. from Berlin to Stralsund (line 28, individual services)
3. from Hamburg to Lübeck (line 25, individual services)
4. from Hamburg to Kiel (lines 20, 22, 28 and 31, individual services)
5. from Bremen to Oldenburg (lines 10, 22 and 25, individual services)
6. from Leipzig via Hanover to Cologne (line 50, individual services)
7. from Leipzig via Kassel to Düsseldorf (line 50, individual services)
8. from Würzburg via Kassel to Essen (line 41, individual services)
9. from Munich to Garmisch-Partenkirchen (lines 25, 28 and 41, individual services)
10. from Nuremberg via Regensburg to Passau (line 91, every two hours)

(Also applies to trains in the opposite directions)

ICE Sprinter

The "ICE Sprinter" trains are trains with fewer stops between Germany's major cities running in the morning and evening hours. They are tailored for business travellers or long-distance commuters and are marketed by DB as an alternative to domestic flights. Some of the Sprinter services continue as normal ICE services after reaching their destination. The service is usually half an hour faster than a standard ICE between the same cities.

A reservation was mandatory on the ICE Sprinter until December 2015.

The first Sprinter service was established between Munich and Frankfurt in 1992. Frankfurt-Hamburg followed in 1993 and Cologne-Hamburg in 1994. This service ran as a Metropolitan service between December 1996 and December 2004. In 1998, a Berlin-Frankfurt service was introduced and a service between Cologne and Stuttgart ran between December 2005 and October 2006.

Until December 2006, a morning Sprinter service ran between Frankfurt and Munich (with an intermediate stop at Mannheim), taking 3:25 hours for the journey. This has been since replaced by a normal ICE connection taking only 3:21 hours.

Starting with the December 2017 schedule change, a new Sprinter line links Berlin main station and Munich main station in less than four hours.

As of July 2018^[update], the individual ICE Sprinter lines are:

(Source: Deutsche Bahn AG^[26])

Line segments abroad

Some ICE trains also run on services abroad – sometimes diverting from their original lines.

1. from Frankfurt Hbf to Amsterdam Centraal (Netherlands) via Köln Hbf, Duisburg Hbf and Arnhem Centraal (lines 120, 122, 128, 126, 220, 222/121, 123, 127, 129, 221)
2. from Frankfurt Hbf to Bruxelles-Midi/Brussel-Zuid (Belgium) via Köln Hbf, Aachen Hbf and Liège-Guillemins (lines 10, 12, 14, 18, 16, 314, 316/11, 13, 15, 17, 19, 315, 317)
3. from Frankfurt Hbf and Stuttgart Hbf to Paris Est (France) via Karlsruhe Hbf and Strasbourg-Ville (lines 9568, 9572, 9574/9563, 9567, 9571, 9573)
4. from Frankfurt Hbf to Paris Est via Saarbrücken Hbf (lines 9550, 9556, 9558/9553, 9555)
5. from Hamburg-Altona, Kiel Hbf and Ostseebad Binz to Basel SBB and Zürich HB (Switzerland) via Frankfurt Hbf and Karlsruhe (lines 73, 75, 77, 79, 203, 205/72, 74, 76, 78, 272)
6. from Frankfurt Hbf and Hamburg-Altona to Chur (Switzerland) via Karlsruhe, Basel SBB and Zürich HB (lines 271, 1271/70)
7. from Frankfurt Hbf, Berlin Hbf and Hamburg-Altona station to Interlaken (Switzerland) via Karlsruhe and Basel SBB (lines 275, 373/278, 376)
8. from Frankfurt Hbf and Dortmund Hbf to Wien Hbf (Austria) via Nürnberg Hbf, Passau Hbf and Linz Hbf (lines 21, 23, 27, 29, 229/20, 22, 26, 28, 228)
9. from Hamburg-Altona to Wien Hbf (Austria) via Berlin Hbf, Nürnberg Hbf, Passau Hbf and Linz Hbf (lines 93, 95/92, 94)
10. from Dortmund Hbf to Innsbruck Hbf (Austria) via Köln Hbf, Stuttgart Hbf, Lindau-Reutin and Bregenz Hbf (line 119), return schedule terminates at Münster Hbf (line 118)
11. from Berlin Hbf to Innsbruck Hbf (Austria) via Würzburg Hbf, Stuttgart Hbf, Lindau-Reutin and Bregenz Hbf (alternative route for lines 118/119)^[27]
12. from Münster Hbf to Klagenfurt Hbf (Austria) via Köln, Stuttgart, Munich Hbf and Salzburg Hbf (line 115), return schedule terminates at Dortmund Hbf (line 114)
13. from Berlin Hbf to Innsbruck Hbf (Austria) via Frankfurt, Stuttgart and Munich (line 1211/1218)
14. from Amsterdam Centraal (Netherlands) to Basel SBB (Switzerland) via Frankfurt Hbf (line 105/104)
15. from Munich to Zürich via Lindau-Reutin (operated by Swiss Federal Railways as EuroCity-Express)

(Also applies to the opposite directions)

Since December 2006, Stuttgart Hbf and Zürich HB have been connected by a bi-hourly service. This service however has been replaced by a daily Intercity service since March 2010.^[28]

The ÖBB in Austria also uses two ICE T trainsets (classified as ÖBB Class 4011) between Wien Hauptbahnhof, Innsbruck Hauptbahnhof and Bregenz (without stops in Germany), although they do not use tilting technology. Since December 2007 ÖBB and DB offer a bi-hourly connection between Wien Westbf and Frankfurt Hbf. On 12 December 2021 a new Railjet schedule was introduced by ÖBB between Frankfurt and Vienna on a different route via Stuttgart, Ulm, Biberach, Friedrichshafen, Lindau, Bregenz and Innsbruck.^[29] Since 11 June 2023 a new ICE service is operated by Deutsche Bahn via the same route between Dortmund and Innsbruck on ICE 4 trains replacing the IC 118/119 service.^[30]

Since June 2007 ICE 3M trains had been running between Frankfurt Hbf and Paris Est via Saarbrücken and Kaiserslautern. Together with the TGV-operated service between Paris Est and München Hbf via Stuttgart Hbf (TGV 9576/9577), this ICE line was part of the "LGV Est européenne", also called "Paris-Ostfrankreich-Süddeutschland" (or POS) for short, a pan-European high-speed line between France and Germany. This service now co-exists with a direct TGV service (TGV 9551/9552).

From late 2007, ICE TD trains linked Berlin Hbf with Copenhagen and Aarhus via Hamburg Hbf. These services have been operated since December 2017 by Danish IC3 sets as EuroCity services.

A EuroCity-Express service was introduced between Munich and Zürich in December 2020 with the completion of the electrification of the line in Germany, replacing a EuroCity service. Six pairs of trains run every two hours and are operated by Swiss Federal Railways with Alstom ETR 610 (Astoro) sets.

In addition, ICE Trains to London via the Channel Tunnel are on the horizon.^[5][6] Unique safety and security requirements for the tunnel (such as airport-style checks at stations) as well as hold-ups in the production of the Velaro-D trains to be used on the route^[31] have delayed these plans.

Intra-Swiss ICE trains

To avoid empty runs or excess waits, several services exist that operate exclusively inside Switzerland:

• three services from Basel SBB to Interlaken Ost
• two services from Basel SBB to Zürich HB
• three service from Interlaken Ost to Basel SBB
• one service from Interlaken Ost to Bern
• two services from Zürich HB to Basel SBB
• one service from Bern to Interlaken Ost

These trains, despite being officially notated as ICEs, are more comparable to a Swiss InterRegio or RegioExpress train, calling at small stations like Möhlin or Sissach. As common in Switzerland, these trains can be used without paying a supplement.

Eschede disaster

The ICE accident near Eschede that happened on 3 June 1998 was a severe railway accident. Trainset 51, travelling as ICE 884 Wilhelm Conrad Röntgen from Munich to Hamburg, derailed at 200 km/h (124 mph), killing 101 people and injuring 88. It remains the world's worst high-speed rail disaster.

The cause of the accident was a wheel rim which broke and damaged the train six kilometres south of the accident site. The wheel rim penetrated the carriage floor and lifted the check rail of a set of points close to Eschede station. This guide rail also penetrated the floor of the car, becoming embedded in the vehicle and lifting the nearby wheels off the rails. One of the now-derailed wheels struck the points lever of the following set of points to change direction, and the rear cars of the trainset were diverted to a different track. They hit the pillars of a street overpass, which then collapsed onto the tracks. Only three cars and the front powerhead passed under the bridge, the rest of the 14-car train jack-knifed into the collapsed bridge.

Other accidents

On 27 September 2001, trainset 5509 fell off a work platform at the Hof maintenance facility and was written off.

On 22 November 2001, powerhead 401 020 caught fire. The train was stopped at the station in Offenbach am Main near Frankfurt a.M. No passengers were harmed, but the fire caused the powerhead to be written off.

On 6 January 2004, ICE TD trainset 1106 caught fire while it was parked at Leipzig. Two cars were written off, and the others are now used as spares.

On 1 April 2004, trainset 321 collided with a tractor that had fallen onto the track at a tunnel entrance near Istein, and was derailed. No-one was injured. Trainset 321 was temporarily taken apart, its cars being switched with cars from other ICE 3 trainsets.

Powerhead 401 553 suffered major damage in a collision with a car on the Mannheim–Frankfurt railway in April 2006.

On 28 April 2006, trainset 73 collided head-on with two BLS Re 465 locomotives at Thun in Switzerland. The driver of the Swiss locomotives was unfamiliar with the new layout of the station, which had been recently changed. He did not see a shunting signal ordering him to stop. The locomotives automatically engaged the emergency brakes when he passed the signal, but came to a stop on the same track as the approaching ICE. The ICE was travelling at a speed of 74 km/h. The emergency brake slowed the train to 56 km/h at the point of collision. 30 passengers and the driver of the ICE suffered minor injuries, the driver of the Swiss locomotives having jumped to safety. Both trains suffered major damage. The powerhead 401 573 had to be rebuilt using components from three damaged powerheads (401 573, 401 020 and 401 551).

On 1 March 2008, trainset 1192, travelling as ICE 23, collided with a tree which had fallen onto the track near Brühl after being blown down by Cyclone Emma. The driver suffered severe injuries. The trainset is back in service, its driving-car having been replaced with that from trainset 1106.

On 26 April 2008, trainset 11, travelling as ICE 885, collided with a herd of sheep on the Hanover-Würzburg high-speed rail line near Fulda. Both powerheads and ten of the 12 cars derailed. The train came to a stop 1300 metres into the Landrückentunnel. 19 of the 130 passengers suffered mostly minor injuries, four of them needing hospital treatment.^[32]

A cracked axle was blamed for a low-speed derailment of a third-generation ICE in Cologne in July 2008. The accident, in which no-one was hurt, caused DB to recall its newest ICEs as a safety measure.^[33] In October 2008, the company recalled its ICE-T trains after a further crack was found.^[34]

On 17 April 2010, ICE 105 Amsterdam - Basel lost a door while travelling at high speed near Montabaur. The door slammed into the side of ICE 612 on the adjacent track. Six people travelling on ICE 612 were injured.^[35]

On 17 August 2010, the ICE from Frankfurt to Paris hit a truck that had slid from an embankment on to the rail near Lambrecht. The first two carriages derailed and ten people were injured, one seriously.^[36]

On 11 January 2011, trainset 4654 partly derailed during a side-on collision with a freight train near Zevenaar in the Netherlands.^[37] There were no injuries.

On 2 May 2017, a trainset was derailed at Dortmund Hauptbahnhof. Two people were injured.^[38]

On 12 October 2018, two cars of a trainset caught fire while it was traveling from Cologne to Munich on the Cologne-Frankfurt line. Five people suffered minor injuries during the evacuation.^[39]

Germany

ICE trains are the highest category (Class A) trains in the fare system of the Deutsche Bahn. Their fares are not calculated on a fixed per-kilometre table as with other trains, but instead have fixed prices for station-to-station connections, depending on a multitude of factors including the railway line category and the general demand on the line. Even on lines where the ICE is not faster than an ordinary IC or EC train (for example Hamburg to Dortmund), an additional surcharge will be levied on the ground that the ICE trains have a higher comfort level than IC/EC trains.

Austria

On the intra-Austrian lines (Vienna-Innsbruck-Bregenz, Vienna-Salzburg(-Munich), Vienna-Passau(-Hamburg) and Innsbruck-Kufstein(-Berlin)) no additional fees are charged.^[40]

Switzerland

Likewise, the trains running to and from Zürich, Interlaken and Chur, as well as those on the intra-Swiss ICE trains (see above) can be used without any surcharge.

Netherlands

On ICE trains between Amsterdam and Cologne, passengers travelling nationally within the Netherlands (between Amsterdam Centraal and Arnhem Centraal) can use the national OV-chipkaart scheme but have to purchase a supplement.^[41] Passengers travelling into/from Germany have to buy an international ticket.

France

On ICE trains between Paris Est and Frankfurt or Stuttgart, only the fare system from SNCF Voyageurs is used for national trips to Forbach and Strasbourg. Reservation is compulsory for trips to/from and within France.