The development of electronics is inseparably connected with progressing miniaturization and it would be difficult today to indicate an area of technology that would benefit from it to a greater extent than ICT equipment. Modern computers are no longer just stationary "PCs" and laptops - today an efficient computer with a multi-core processor and at least a few gigabytes of RAM can be part of another device. What's more - it does not require high costs, and many models of single board minicomputers (SBC) are within reach of electronic amateurs and makers. The Botland store is a leading distributor of both the main modules and their overlays, cameras, displays, housings and numerous accessories supporting the use of minicomputers.
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
MINICOMPUTERS
Loading...
STM32 NUCLEO-F042K6 - STM32F042K6 ARM Cortex M0
A small module with a 32-bit microcontroller with ARM Cortex M0, 48 MHz, 32 KB of Flash, 6 KB of SRAM. Nucleo is compatible with the mbed platform. The pins are compatible with...
Index: DIS-04890
Index: DIS-04890
L76X Multi-GNSS HAT - GPS/BDS/QZSS for Raspberry Pi 4B/3B+/3B/2B/Zero - Waveshare 16193
The GNSS overlay for Raspberry Pi and Jetson Nano minicomputers supports Multi-GNSS systems: GPS, BDS and QZSS. The main advantages of the module are fast positioning, high...
Index: WSR-14783
Index: WSR-14783
- Reduced price
- Promotion
Pirate Audio 3W Stereo Amp - 3W amplifier with display - AMP for Raspberry Pi - Pimoroni PIM484
Overlay with two DAC chips for the Raspberry Pi minicomputer. The board is equipped with a 3 W stereo audio output , two speaker terminals and a 1.3 " colour IPS display ....
Index: PIM-15898
Index: PIM-15898
Pirate Audio Speaker -speaker with display - DAC for Raspberry Pi - Pimoroni PIM485
DAC amplifier cap for Raspberry Pi minicompouter. It has a built-in 1 W / 8 Ω speaker and a 1.3" colour IPS display. Additionally, the board is equipped with 4...
Index: PIM-15897
Index: PIM-15897
Module with M12 mount lens IMX219 8Mpx - for Raspberry Pi V2 camera - ArduCam B0184
ArduCam module with low distortion lens designed for Raspberry Pi V2 camera. It is equipped with IMX219 sensor with 8 Mpx sensor and 1/4" format. The camera has a field of...
Index: ACM-15750
Index: ACM-15750
IO Expansion HAT for Raspberry Pi 4B/3B+/3B/2B - DFRobot DFR0566
Overlay for Raspberry Pi mini-computer in 4B / 3B+ / 3B / 2B version, where individual sections of Raspberry Pi outputs have been separated , such as: digital, analog, PWM,...
Index: DFR-15713
Index: DFR-15713
DC Motor Driver HAT V1.0 - 2-channels motor driver 12V/1,2A - HAT for Raspberry Pi - DFRobot DFR0592
Two-channel DC motor controller TB6612FNG operating with voltage from 7 V to 12 V and continuous current 1.2 A per channel and momentary 2 A. The module in the form of an...
Index: DFR-15298
Index: DFR-15298
MXChip Microsoft Azure IoT Developer Kit - DFRobot DFR0512
IoT development board based on STM32F412 ARM Cortex M4F. It is equipped with WiFi module, OLED display, audio codec, motion, pressure, temperature, humidity and magnetometer...
Index: DFR-15093
Index: DFR-15093
- Reduced price
- Promotion
Beetle - ATmega32u4 - DFRobot DFR0282
Beetle is the smallest tile compatible with Arduino Leonardo. The module is based on ATmega32u4 and is clocked at 16 MHz. It has 10 digital, 5 analogue and 4 PWM pins. The...
Index: DFR-15092
Index: DFR-15092
Seeeduino Nano - compatible with Arduino
Seeeduino Nano is similar to Seeeduino V4.2, which is built around an 8-bit ATmega328P microcontroller . It has the same functions, so you can use the same program codes...
Index: SEE-14993
Index: SEE-14993
Case Raspberry Pi 4B with camera mount - transparent
Transparent housing for Raspberry Pi 4 Model B minicomputer and camera, 95 x 70 x 33 mm.
Index: GRL-14897
Index: GRL-14897
Power supply justPi USB-C 5,1V / 3A for Raspberry Pi 4B
Switch mode power supply, dedicated for Raspberry Pi 4 minicomputer. It has appropriate parameters needed for optimal power supply of the device. Output voltage is 5.1 V and...
Index: ZAS-14878
Index: ZAS-14878
- On sale!
Sony IMX219-120 8Mpx camera - compatible with Jetson Nano - Waveshare 16579
Sony IMX219-120 camera module equipped with IMX219 sensor compatible with Jetson Nano. The camera is equipped with 8 Mpx sensor. The maximum recording resolution is 3280 x 2464...
Index: WSR-14785
Index: WSR-14785
Sony IMX219-77 8Mpx camera module - compatible with Jetson Nano - Waveshare 16507
Camera module IMX219-77 equipped with Jetson Nano compatible IMX219 sensor. The camera has a matrix with a resolution of 8 Mpx. It has a maximum image resolution of 3280 x 2464...
Index: WSR-14784
Index: WSR-14784
Waveshare touch screen, 5.5" capacity for Raspberry Pi with 1080 x 1920 px resolution. Display protected by hardened glass. Includes HDMI connection and mrcroUSB cable for...
Index: WSR-14780
Index: WSR-14780
Case for Raspberry Pi with 4 IN fan gray, transparent
Grey transparent plastic housing, for Raspberry Pi 4B. Dimensions are 90 x 59 x 27 mm . Fan and screws are included. The enclosure consists of an upper and lower cover...
Index: DNG-16188
Index: DNG-16188
Transparent casing for the Odroid N2 / N2+ minicomputer for an aesthetic appearance and protection against dust and damage. Made of durable plastic.
Index: ODR-14416
Index: ODR-14416
- Reduced price
- Promotion
Electronic components set for Arduino - Iduino KTS042
A set of prototype parts that you can use to create circuits with Arduino. The set includes: contact board, wire sets, Tact Switch buttons, LEDs, and a table to help identify...
Index: OST-14319
Index: OST-14319
Electronic components set for Arduino - Iduino KTS021
A set of prototyping components which can be used to create circuits with Arduino. The set includes: contact board, wire sets, LED matrix, segmented displays, table for easy...
Index: OST-14317
Index: OST-14317
Expansion Kit - extension Raspberry Pi to breadboard + tape + breadboard - Iduino RA028
A module that allows the GPIO Raspberry Pi pins to be led out onto the contact plate using IDC tape. The kit also includes a contact plate and 40-pin tape.
Index: OST-14267
Index: OST-14267
- Reduced price
- Promotion
Touch screen - resistive LCD 3,5" 320x480px GPIO for Raspberry Pi
Touch screen, 3.5" resistive for Raspberry Pi with 320 x 480 px resolution. Works with any 40-pin version of Raspberry Pi versions via GPIO pins.
Index: OST-14264
Index: OST-14264
GPIO to FPC Breakout pHAT for Raspberry Pi
Trim wyprowadzająca 40-pin GPIO connector on the FPC so that you can connect sensors, wires, etc, with the Raspberry Pi Board. It allows also connection of the display...
Index: SUP-14228
Index: SUP-14228
RedBoard Qwiic - Arduino compatible - SparkFun DEV-15123
A module made by SparkFun is fully compatible with the Arduino Uno. It has 14 digital input/outputs, 6 PWM channels, 6 analog inputs, as well as popular communication...
Index: SPF-13881
Index: SPF-13881
Case for Raspberry Pi 3 A+ black - 5 layers
Black, five-layer case for the Raspberry Pi 3 minicomputer in version A+ with external dimensions of 75 x 68 x 21 mm .
Index: DNG-13670
Index: DNG-13670
See also
SBC minicomputers - what are they and what can they be used for?
A single-board computer (SBC) is nothing more than a highly miniaturized motherboard which, in addition to the processor, RAM or communication interface sockets (USB, Ethernet, HDMI, etc.), also has a number of additional modules and functionalities . In many cases, the role of the hard drive is played by... a fast microSD card - this solution, apart from the obvious advantage of very low cost (compared to classic computer drives), also provides incredible flexibility and ease when working on projects based on a minicomputer. There is nothing simpler than removing the card from the slot of a (turned off!) minicomputer and inserting it into a reader on a laptop or desktop computer in order to image the entire file system or perform various modifications that, for some reason, would be difficult to perform from the SBC level itself. . Moreover, single-board minicomputers usually have additional GPIO connectors, not found in standard "PCs", which make connecting the minicomputer with external electronic systems extremely easy, known from simpler platforms, e.g. Arduino. These last two advantages resulted in the enormous popularity of single-board minicomputers in amateur, prototype and academic applications.
A wide range of SBC minicomputers
Our offer includes an extremely wide portfolio of minicomputers from various manufacturers. We have, among others: a wide range of iconic Raspberry Pi modules and countless dedicated accessories (Raspberry Pi Hat covers, microSD cards, power supplies, cases, USB accessories, and even gadgets with the raspberry logo). We also have minicomputers from the Odroid, FriendlyARM NanoPi, Odyssey, NVIDIA, LattePanda, Khadas VIM, UP board, BeagleBone, Rock64, Sparky, Google Coral, CubieBoard series and - of course - Arduino, which can also be considered today the simplest, although extremely universal version a simple minicomputer.
Minicomputers - FAQ
A microcomputer (also called a minicomputer) is nothing more than a device with the functionality of a classic, full-size computer, but closed in a highly miniaturized form. A special type are single-board minicomputers (SBC - e.g. Raspberry Pi ), whose construction is based on a single printed circuit board, usually with dimensions not exceeding several centimeters and containing all the necessary base components.
The microcomputer can be used for the same purposes as regular desktop computers and laptops - e.g. for office work, browsing the Internet, or... creating and testing software. However, the advantage of miniature computers is the possibility of integrating them into a larger device, as a main controller or human-machine interface .