Additive approach

Several additional approaches for analyzing mixtures have been developed that do not require such a large difference in rate constants.Because both A and B react at the same time, the integrated form of the first-order rate law becomes... [Pg.641]

E. Termine and K. G. Taylor, "A New Intumescent Flame Retardant Additive for Thermoplastics and Thermosets," n Additive Approaches to PolymerModification, SPE RETEC Conference Papers, Toronto, Ontario, Canada, Sept. 1989. [Pg.482]

The additive approach to compatibilization is limited by the fact that there is a lack of economically viable routes for the synthesis of suitable block and graft copolymers for each system of interest. The compatihilizer market is often too specific and too small to justify a special synthetic effort. [Pg.415]

The primary disadvantage of the conjugate addition approach is the necessity of performing two chiral operations (resolution or asymmetric synthesis) ia order to obtain exclusively the stereochemicaHy desired end product. However, the advent of enzymatic resolutions and stereoselective reduciag agents has resulted ia new methods to efficiently produce chiral enones and CO-chain synthons, respectively (see Enzymes, industrial Enzymes in ORGANIC synthesis). Eor example, treatment of the racemic hydroxy enone (70) with commercially available porciae pancreatic Hpase (PPL) ia vinyl acetate gave a separable mixture of (5)-hydroxyenone (71) and (R)-acetate (72) with enantiomeric excess (ee) of 90% or better (204). [Pg.162]

The additive approach to reducing SO emissions can be either detrimental or beneficial toward NO reduction. Early alumina-based SO removal additives actually produced substantial increases in NO content in the flue gas (48). The more recent spinel-based SO removal additives have been reported to reduce NO emission by 30% in one commercial trial (49). [Pg.215]

Activation of dopamine 1 receptors (fenoldopam) or inhibition of A1 adenosine receptors (CVT 124, KW-3902) are additional approaches that cause increased NaCl excretion at least in part by inhibition of proximal reabsoiption. [Pg.429]

Ye and co-workers have shown that NHC 67 can catalyse the aza-Morita-Bay-lis-Hillman reaction of enones 66 and N-tosyl imines 63, presumably via initial NHC conjugate addition to the enone to generate an azolium enolate 68 [18]. A related conjugate addition approach has been exploited by Fu and co-workers, with tautomerisation of the initial enolate 72 derived from NHC conjugate addition to 70 giving 73, with subsequent cyclisation resulting in the umpolung of Michael acceptors (Scheme 12.13) [19]. [Pg.270]

A kind of standard additions approach can also be used for the measurement of apparent complexing capacity. In this technique, labile copper is measured by differential pulse anodic stripping voltammetry after each of a number of spikes of ionic copper have been added to the sample [420]. [Pg.429]

An additional approach to IL-1 down-regulation could entail development of inhibitors of the proteolytic enzymes that release the active interleukin from its inactive precursor. Moreover, such inhibitors could probably be taken orally and, thus, would be suitable to treat chronic inflammation (the alternatives outlined above would be administered parenterally). [Pg.254]

More recently, an additional approach to preventing TNF toxicity has been proposed. Several metalloprotease inhibitors (most notably hydroxamic acid) prevent proteolytic processing (i.e. release) of TNF-a from producer cell surfaces. Such inhibitors may also prove useful in preventing TNF-induced illness. The extent to which TNF (and inhibitors of TNF) will serve as future therapeutic agents remains to be determined by future clinical trials. [Pg.260]

RNAi and ribozymes represent two additional approaches to gene silencing/down-regulation with therapeutic potential. RNAi is an innate cellular process that achieves silencing of selected genes via an anti-sense mechanism. It shares many characteristics with the antisense-based approach described above, but also some important differences, e.g. in the exact mechanism by which the antisense effect is achieved. [Pg.451]

According to the results obtained, and assuming that the simple additive approach applied is valid, malathion appears to be the main contributor to Daphnia toxicity (98% toxic contribution on average for all samples) molinate, fenitrothion, and malathion would be the most relevant pesticides in the case of V. fischeri... [Pg.266]

In some simple cases an additive approach can be successful. The service life is divided into stages, for example moderate exposure for one year, severe exposure for one month and low exposure for five years. The predicted degradation effects for the three periods can be summed and the condition of the product at the end, and hence residual lifetime, estimated. If it is assumed that degradation is proportional to the time of exposure and that the damage from different exposure conditions can be cumulatively added then the so called Miner s rule could be used ... [Pg.127]

It should be mentioned that rotational anisotropy of the molecule will result in an increase in the R2 values for NH vectors having particular orientation with respect to the diffusion tensor frame [46]. This increase could be misinterpreted as conformational exchange contributions, and, vice versa, small values of Rex, usually of the order or 1 s 1 or less, could be mistaken for the manifestation of the rotational anisotropy. Therefore, identification of residues subjected to conformational exchange is critical for accurate analysis of relaxation data. Additional approaches are necessary to distinguish between the two effects. As suggested earlier [27] (see also Ref. [26]), a comparison between R2 and the cross-correlation rate r]xy could serve this purpose, as tjxy contains practically the same combination of spec-... [Pg.302]

An additional approach to handling paired data is to assess the degree of correlation between the pairs. The data can be presented as a graph in which one axis is used for the results obtained by one method and the other axis for the results of the same samples obtained by the other method. If each sample analysed gave an identical result by both methods then a characteristic graph would result (Figure 1.2(a)). The closeness of the fit between all the points and... [Pg.15]

Probably the best way to overcome the problem of poor selectivity is via the multiple standard addition approach in which known amounts of analyte are added to the sample in increasingly high concentrations. Using this method, a... [Pg.66]

Similar studies have been performed using [Ca2Al(0H)6](N03)-2H20 (CaAl-NOs) [52]. Stirring the LDH with an equimolar mixture of the disodium salts of 1,2-BDA and 1,4-BDA resulted in intercalation of the 1,4 isomer with > 95% selectivity. The reactions are found to be very rapid when studied in-situ at 80 °C, and so a dropwise addition approach was again employed. The reaction cannot be studied at lower temperatures because of the poor crystallinity of the product at low temperature. [Pg.182]

Finally, an additional approach to using hydrocarbon fuels with Ni-based anodes involves using methanol and ethanol, molecules that carry sufficient oxygen to avoid carbon formation.Unlike the case with low-temperature fuel cells, methanol crossover is not an issue with ceramic membranes. Since methanol decomposes very readily to CO and H2. SOFC can operate with a very high performance using this fuel. ° ° In addition, recent work has shown promising performance levels with limited carbon deposition using dimethyl ether as fuel. ° ° ... [Pg.615]

The techniques discussed in this chapter are intended as an overview of how laser microbeams might be used in conjunction with antibodies to address various aspects of molecular and cellular biology. There may be other applications that were not covered, and there will likely be additional approaches developed as laser microbeams become increasingly available. Although microscopes are already a common tool of biological research, lasers are becoming so. With decreases in their size, complexity, and cost, lasers may become a standard accessory to the research microscope. [Pg.172]

An additional approach, that was used to study nucleosomal dynamics, was... [Pg.473]

Instead, the simultaneous method can be extended to select adaptively a sufficient number of finite elements. Here, we note that even if we set any element length to zero, the collocation equations and the continuity equations are still satisfied. Thus, any number of zero length (or dummy) elements can be added without changing the control or state profiles, or the solution to the NLP. Vasantharajan and Biegler (1990) take advantage of this important property and propose an adaptive element addition approach embedded within the simultaneous solution strategy. [Pg.226]

Tarver, C. M. 1979. Density estimations for explosives and related compoimds using the group additivity approach. J. Chemical Engineering Data 24 136-45. [Pg.53]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...