Biological membrane model

Our knowledge of biological membrane ultrastructure has increased considerably over the years as a result of rapid advances in instrumentation. Although there is still controversy over the most correct biological membrane model, the concept of membrane structure presented by Davson and Danielli of a lipid bilayer is perhaps the one best accepted [12,13]. The most current version of that basic model, illustrated in Fig. 7, is referred to as the fluid mosaic model of membrane structure. This model is consistent with what we have learned about the existence of specific ion channels and receptors within and along surface membranes. [Pg.40]

L. E. Morrison and G. Weber, Biological membrane modeling with a liquid/liquid interface. Probing mobility and environment with total internal reflection excited fluorescence, Biophys. J. 52, 367-379 (1987). [Pg.341]

A very brief description of biological membrane models, and model membranes, is given. Studies of lateral diffusion in model membranes (phospholipid bilayers) and biological membranes are described, emphasizing magnetic resonance methods. The relationship of the rates of lateral diffusion to lipid phase equilibria is discussed. Experiments are reported in which a membrane-dependent immunochemical reaction, complement fixation, is shown to depend on the rates of diffusion of membrane-bound molecules. It is pointed out that the lateral mobilities and distributions of membrane-bound molecules may be important for cell surface recognition. [Pg.249]

P. Bothorel and C. Lussan, On a biological membrane model based on lipid-protein interactions, C. R. Hebd. Seances Acad. Sci. 266C(26), 2492-2494,... [Pg.205]

In Chap. 7, L. I. Boguslavsky and A. G. Volkov consider various redox reactions occurring at the interface between immiscible liquids. Here, the octane/water interface is taken as a biological membrane model. With its use it is possible to observe redox processes and their coupUng with other reactions, involving not only the simplest ingredients but also the respiratory chain enzymes. [Pg.2]

Like surfactants with hydrocarbon chains, fluorinated surfactants can form liquid crystals. Liquid crystals of fluorinated surfactants are important because of industrial applications and their use as biological membrane models (see Chapter 8). [Pg.332]

Anionic fluorinated surfactants form liquid crystals with cationic fluorinated surfactants (see Chapter 7). Liquid crystals of fluorinated surfactants are used in various industrial applications and as biological membrane models. [Pg.368]

The study of mixed films has become of considerable interest. From the theoretical side, there are pleasing extensions of the various models for single-component films and from the more empirical side, one moves closer to modeling biological membranes. Following Gershfeld [200], we categorize systems as follows ... [Pg.140]

As a point of interest, it is possible to form very thin films or membranes in water, that is, to have the water-film-water system. Thus a solution of lipid can be stretched on an underwater wire frame and, on thinning, the film goes through a succession of interference colors and may end up as a black film of 60-90 A thickness [109]. The situation is reminiscent of soap films in air (see Section XIV-9) it also represents a potentially important modeling of biological membranes. A theoretical model has been discussed by Good [110]. [Pg.552]

Biological membranes provide the essential barrier between cells and the organelles of which cells are composed. Cellular membranes are complicated extensive biomolecular sheetlike structures, mostly fonned by lipid molecules held together by cooperative nonco-valent interactions. A membrane is not a static structure, but rather a complex dynamical two-dimensional liquid crystalline fluid mosaic of oriented proteins and lipids. A number of experimental approaches can be used to investigate and characterize biological membranes. However, the complexity of membranes is such that experimental data remain very difficult to interpret at the microscopic level. In recent years, computational studies of membranes based on detailed atomic models, as summarized in Chapter 21, have greatly increased the ability to interpret experimental data, yielding a much-improved picture of the structure and dynamics of lipid bilayers and the relationship of those properties to membrane function [21]. [Pg.3]

Hydrated bilayers containing one or more lipid components are commonly employed as models for biological membranes. These model systems exhibit a multiplicity of structural phases that are not observed in biological membranes. In the state that is analogous to fluid biological membranes, the liquid crystal or La bilayer phase present above the main bilayer phase transition temperature, Ta, the lipid hydrocarbon chains are conforma-tionally disordered and fluid ( melted ), and the lipids diffuse in the plane of the bilayer. At temperatures well below Ta, hydrated bilayers exist in the gel, or Lp, state in which the mostly all-trans chains are collectively tilted and pack in a regular two-dimensional... [Pg.465]

Langmuir-Blodgett films (LB) and self assembled monolayers (SAM) deposited on metal surfaces have been studied by SERS spectroscopy in several investigations. For example, mono- and bilayers of phospholipids and cholesterol deposited on a rutile prism with a silver coating have been analyzed in contact with water. The study showed that in these models of biological membranes the second layer modified the fluidity of the first monolayer, and revealed the conformation of the polar head close to the silver [4.300]. [Pg.262]

Simulations of water in synthetic and biological membranes are often performed by modeling the pore as an approximately cylindrical tube of infinite length (thus employing periodic boundary conditions in one direction only). Such a system contains one (curved) interface between the aqueous phase and the pore surface. If the entrance region of the channel is important, or if the pore is to be simulated in equilibrium with a bulk-like phase, a scheme like the one in Fig. 2 can be used. In such a system there are two planar interfaces (with a hole representing the channel entrance) in addition to the curved interface of interest. Periodic boundary conditions can be applied again in all three directions of space. [Pg.353]

Seelig, J., and Seelig, A., 1981. Lipid conformadon in model membranes and biological membranes. Quarterly Review of Biophysics 13 19-61. [Pg.295]

Phospholipids e.g. form spontaneously multilamellar concentric bilayer vesicles73 > if they are suspended e.g. by a mixer in an excess of aqueous solution. In the multilamellar vesicles lipid bilayers are separated by layers of the aqueous medium 74-78) which are involved in stabilizing the liposomes. By sonification they are dispersed to unilamellar liposomes with an outer diameter of 250-300 A and an internal one of 150-200 A. Therefore the aqueous phase within the liposome is separated by a bimolecular lipid layer with a thickness of 50 A. Liposomes are used as models for biological membranes and as drug carriers. [Pg.12]

With the adequacy of lipid bilayer membranes as models for the basic structural motif and hence for the ion transport barrier of biological membranes, studies of channel and carrier ion transport mechanisms across such membranes become of central relevance to transport across cell membranes. The fundamental principles derived from these studies, however, have generality beyond the specific model systems. As noted above and as will be treated below, it is found that selective transport... [Pg.179]

Ion-selective bulk membranes are the electro-active component of ion-selective electrodes, which sense the activity of certain ions by developing an ion-selective potential difference according to the Nernst equation at their phase boundary with the solution to be measured. The main differences to biological membranes are their thickness and their symmetrical structure. Nevertheless they are used as models for biomembranes. [Pg.219]

Ion-selective bulk membranes are the electro-active component of ion-selective electrodes. They differ from biological membranes in many aspects, the most marked being their thickness which is normally more then 105 times greater, therefore electroneutrality exists in the interior. A further difference is given by the fact that ion-selective membranes are homogeneous and symmetric with respect to their functioning. However, because of certain similarities with biomembranes (e.g., ion-selectivity order, etc.) the more easily to handle ion-selective membranes were studied extensively also by many physiologists and biochemists as model membranes. For this reason research in the field of bio-membranes, and developments in the field of ion-selective electrodes have been of mutual benefit. [Pg.220]

Fig. 5. Tentative mixed potential model for the sodium-potassium pump in biological membranes the vertical lines symbolyze the surface of the ATP-ase and at the same time the ordinate of the virtual current-voltage curves on either side resulting in different Evans-diagrams. The scale of the absolute potential difference between the ATP-ase and the solution phase is indicated in the upper left comer of the figure. On each side of the enzyme a mixed potential (= circle) between Na+, K+ and also other ions (i.e. Ca2+ ) is established, resulting in a transmembrane potential of around — 60 mV. This number is not essential it is also possible that this value is established by a passive diffusion of mainly K+-ions out of the cell at a different location. This would mean that the electric field across the cell-membranes is not uniformly distributed.

Kaprelyants, A., Suleimenov, M., Sorokina, A., Deborin, G., El-Registan, G., Stoyanovich, F., Lille, Yu., Ostrovsky, D. Structural-functional changes in bacterial and model membranes induced by phenolic lipids. Biological membranes, Vol.4, No.3, (March 1987), pp. 254-261, ISSN 0748-8653... [Pg.198]

Quinn, P.J. (1985). A lipid-phase separation model of low temperature damage to biological membranes. Cryobiology, 22, 128-40. [Pg.129]

The use of Upid bilayers as a relevant model of biological membranes has provided important information on the structure and function of cell membranes. To utilize the function of cell membrane components for practical applications, a stabilization of Upid bilayers is imperative, because free-standing bilayer lipid membranes (BLMs) typically survive for minutes to hours and are very sensitive to vibration and mechanical shocks [156,157]. The following concept introduces S-layer proteins as supporting structures for BLMs (Fig. 15c) with largely retained physical features (e.g., thickness of the bilayer, fluidity). Electrophysical and spectroscopical studies have been performed to assess the appUcation potential of S-layer-supported lipid membranes. The S-layer protein used in aU studies on planar BLMs was isolated fromB. coagulans E38/vl. [Pg.369]

Although for the moment this model is only partially supported by experimental data it offers the opportunity to design new experiments which will help to understand the mechanisms of pardaxin insertion and pore formation in lipid bilayers and biological membranes which at a molecular level are the events leading to shark repellency and toxicity of this marine toxin. [Pg.363]

Absorption across biological membranes is often necessary for a chemical to manifest toxicity. In many cases several membranes need to be crossed and the structure of both the chemical and the membrane need to be evaluated in the process. The major routes of absorption are ingestion, inhalation, dermal and, in the case of exposures in aquatic systems, gills. Factors that influence absorption have been reviewed recently. Methods to assess absorption include in vivo, in vitro, various cellular cultures as well as modelling approaches. Solubility and permeability are barriers to absorption and guidelines have been developed to estimate the likelihood of candidate molecules being absorbed after oral administration. ... [Pg.33]

Our first exploration of property space was focused on acetylcholine. This molecule was chosen for its interesting structure, major biological role, and the abundant data available on its conformational properties [15]. The behavior of acetylcholine was analyzed by MD simulations in vacuum, in isotropic media (water and chloroform) [16] and in an anisotropic medium, i.e. a membrane model [17]. Hydrated n-octanol (Imol water/4mol octanol) was also used to represent a medium structurally intermediate between a membrane and the isotropic solvents [17]. [Pg.11]

L. G. Reevaluating equilibrium and kinetic binding parameters for lipophilic drugs based on a structural model for drug interaction with biological membranes. [Pg.435]

The protein-containing colloidal solutions of water-in-organic solvents are optically transparent. Hence, absorption spectroscopy, circular dichroism spectroscopy and fluorescence spectroscopy are found to be convenient for studying biocatalysis [53]. The reversed micelles are interesting models for studying bioconversion, since the majority of the enzymes in vivo act inside or on the surface of biological membranes. [Pg.557]

Various types of research are carried out on ITIESs nowadays. These studies are modeled on electrochemical techniques, theories, and systems. Studies of ion transfer across ITIESs are especially interesting and important because these are the only studies on ITIESs. Many complex ion transfers assisted by some chemical reactions have been studied, to say nothing of single ion transfers. In the world of nature, many types of ion transfer play important roles such as selective ion transfer through biological membranes. Therefore, there are quite a few studies that get ideas from those systems, while many interests from analytical applications motivate those too. Since the ion transfer at an ITIES is closely related with the fields of solvent extraction and ion-selective electrodes, these studies mainly deal with facilitated ion transfer by various kinds of ionophores. Since crown ethers as ionophores show interesting selectivity, a lot of derivatives are synthesized and their selectivities are evaluated in solvent extraction, ion-selective systems, etc. Of course electrochemical studies on ITIESs are also suitable for the systems of ion transfer facilitated by crown ethers and have thrown new light on the mechanisms of selectivity exhibited by crown ethers. [Pg.629]

Whereas the relationship of solute permeability with lipophilicity has been studied in a large number of in vivo systems (including intestinal absorption models [54,55], blood-brain [56 58] and blood nerve [59] barrier models, and cell culture models [60 62], to name just a few), numerous in vitro model systems have been developed to overcome the complexity of working with biological membranes [63-66]. Apart from oil-water systems that are discussed here, the distribution of a solute between a water phase and liposomes is... [Pg.728]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...