LARGE , use with

There are two types of sample valve commonly used in LC, the internal loop valve and the external loop valve. In order to improve the seating and eliminate leaks, the valve faces are sometimes made from appropriate ceramics. The internal loop valves are largely used with small bore columns, that is to say columns having internal diameters of less than 1.5 mm. The external loop valves are used for larger diameter columns up to semi-preparative columns. [Pg.293]

Cleanup An additional separation of the mycotoxin from lipids and other components of the matrix is accomplished through the cleanup step. Most procedures include solid-phase extraction on stationary phases such as silica, C,8, florisil, and phenyl. Prepacked columns are largely used, with the variations between lots being recently ameliorated. Alternatively, the use of cleanup by immunoaffinity, based on the formation of mycotoxin-protein conjugate, is on the increase, since this is very rapid, selective, and usefully employed in various food matrices. One disadvantage is that the cost is still rather high, and cross-contamination phenomena (false-positive) can occur (30). [Pg.499]

A number of detailed kinetic studies on the thermal reactions of fluorine compounds has been made in recent years by Atkinson and associates " at the Imperial College of Science and Technology, London. The static method has been largely used, with nickel, stainless steel, and occasionally, pyrex glass reaction vessels suitably aged after several decompositions of the fluorine compound. Glass vessels are attacked by fluorine compounds at high temperatures presumably with the formation of carbon monoxide and silicon fluoride -... [Pg.151]

It is an energetic oxydant, for which it is largely used. With certain organic substances it does not behave us an oxydant, but becomes... [Pg.117]

The results shown in Table 2 indicate that UNIQUAC can be used with confidence for multicomponent vapor-liquid equilibria including those that exhibit large deviations from ideality. [Pg.55]

If indirect heat transfer is used with a large temperature difference to promote high rates of cooling, then the cooling fluid (e.g., boiling water) is fixed by process requirements. In this case, the heat of reaction is not available at the temperature of the reactor effluent. Rather, the heat of reaction becomes available at the temperature of the quench fluid. Thus the feed stream to the reactor is a cold stream, the quench fluid is a hot stream, and the reactor effluent after the quench is also a hot stream. [Pg.329]

CH2CI2. A colourless liquid with a chloroform-like odour b.p. 4I°C. Prepared by heating chloroform with zinc, alcohol and hydrochloric acid manufactured by the direct chlorination of methane. Decomposed by water at 200°C to give methanoic and hydrochloric acids. Largely used as a solvent for polar and non-polar substances, particularly for paint removal (30%), dissolving cellulose acetate and degreasing (10%). It is more stable than carbon tetrachloride or chloroform especially towards moisture or alkali. It is somewhat toxic. U.S. production 1981 280000 tonnes. [Pg.135]

Dimeihylamine, C2H7N, (CH3)2NH. Colourless, inflammable liquid with an ammoniacal odour, mp -96" C, b.p. 7°C. Occurs naturally in herring brine. Prepared in the laboratory by treating nitrosodimetbyl-aniline with a hot solution of sodium hydroxide. Dimethylamine is largely used in the manufacture of other chemicals. These include the solvents dimethylacetamide and dimethyl-formamide, the rocket propellant unsym-metrical dimethylhydrazine, surface-active agents, herbicides, fungicides and rubber accelerators. [Pg.260]

If a shallow kick off in soft formation is required (e.g. to steer the borehole away underneath platforms) a technique using jet bit deflection or badgering is employed (Fig. 3.16). A rock bit is fitted with two small and one large jet. With the bit on bottom and oriented in the desired direction the string is kept stationary and mud is pumped through the nozzles. This causes asymmetric erosion of the borehole beneath the larger jet. Once sufficient hole has been jetted, the drill bit will be rotated again and the new course followed. This process will be repeated until the planned deviation is reached. [Pg.46]

For this experiment, as well as for the microtomography ( 3.2) we used the commercial desktop microtomography system Skyscan 1072 [5], the setup of which is sketched in Figure 1. For this instrument, which is designed to study relatively large objects with a diameter up to 50 mm, the source size is 8 pm, the distance source-detector is about 50 cm and the effective resolution of the detector is about 80 pm. For this system and this object, the global effective resolution a is estimated to be of the order of 50 to 100 pm [6]. [Pg.576]

An experimental teclmique that is usefiil for structure studies of biological macromolecules and other crystals with large unit cells uses neither the broad, white , spectrum characteristic of Lane methods nor a sharp, monocliromatic spectrum, but rather a spectral band with AX/X 20%. Because of its relation to the Lane method, this teclmique is called quasi-Laue. It was believed for many years diat the Lane method was not usefiil for structure studies because reflections of different orders would be superposed on the same point of a film or an image plate. It was realized recently, however, that, if there is a definite minimum wavelengdi in the spectral band, more than 80% of all reflections would contain only a single order. Quasi-Laue methods are now used with both neutrons and x-rays, particularly x-rays from synclirotron sources, which give an intense, white spectrum. [Pg.1381]

The first part of the method involves sorting all the atoms into their appropriate cells. This sorting is rapid, and may be perfonned at every step. Then, within the force routine, pointers are used to scan tlirough the contents of cells, and calculate pair forces. This approach is very efficient for large systems with short-range forces. A certain amount of unnecessary work is done because the search region is cubic, not (as for the Verlet list) spherical. [Pg.2254]

A useful empirical method for the prediction of chemical shifts and coupling constants relies on the information contained in databases of structures with the corresponding NMR data. Large databases with hundred-thousands of chemical shifts are commercially available and are linked to predictive systems, which basically rely on database searching [35], Protons are internally represented by their structural environments, usually their HOSE codes [9]. When a query structure is submitted, a search is performed to find the protons belonging to similar (overlapping) substructures. These are the protons with the same HOSE codes as the protons in the query molecule. The prediction of the chemical shift is calculated as the average chemical shift of the retrieved protons. [Pg.522]

Although apparatus employing ground-glass joints is excellent for work on a macro scale, it is not always suitable for very small-scale work as the joints are often disproportionately large compared with the rest of the assembly. The semi-micro apparatus described on pp. 59-72 can therefore be considered as being of general utility for this scale of work, especially as the use of corks has been reduced to a minimum. [Pg.42]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...