Colloids preparation

The PVAc latex containing PVA as a protective colloid prepared in method [III] using the HPO (0.12%)-TA (0,10%) system as an initiator in Table 1 was cast to about 1.8 mm in thickness on a poly(ethylene) plate and dried at room temperature. The dried latex films were 0.7-0.9 mm in thickness and were semi-transparent. The porous film after acetone extraction changed to a white color without a change in the film size. [Pg.172]

The photoelectrochemical properties of 283 colloids prepared by chemical solution growth [193] have been demonstrated by carrying out oxidation and reduction processes under visible light irradiation. Charged stabilizers such as Nation were found to provide an effective microenvironment for controlling charge transfer between the semiconductor colloid and the redox relay. [Pg.258]

Studies performed on CdS [282, 283] have revealed the importance of the microstructure, i.e., crystal structure, crystallite size, and geometrical surface area, in both the control of band structure and the concentration and mobility of charges, in relation to the photocatalytic performance of the photocatalyst. It has been shown also that the solubility product of CdS colloids prepared from acetate buffer aqueous solutions of suitable precursors increases from 7.2x 10 for large particles to about 10 for small (< 2.5 nm) particle colloids, this increase invoking a positive shift on the cathodic corrosion potential [284]. [Pg.277]

In summary, we have described our approach towards the synthesis of novel nano-objects consisting of a metal core and a surface that may be functionalized by addition of organic ligands. TEM pictures of the metal core of these nanoparticles appear similar to those of particles commonly used in heterogeneous catalysis or to colloids prepared by well-known reduction methods. However, the organometallic approach displays several specificities which can be summarized as follows ... [Pg.256]

Figure 17. Different steps involved in the digestive ripening procedure of colloids prepared by the inverse micelle method.

Figure 21. Room-temperature optical-absorption spectra of various digestively ripened Au colloids prepared by the inverse-micelle method. For comparison, the spectrum of the as-prepared colloid is also displayed. (Reprinted with permission from Ref [49], 2002, American Chemical Society.)...

Thus, we see that the digestive ripening process leads to highly monodispersed nanoparticles that can come together to form ordered superstructures similar to atoms or molecules that form crystals from a supersaturated solution. Then if the superstructure formation can indeed be related to atomic/molecular crystallization, it should also be possible to make these supercrystals more soluble in the solvent with a change of temperature. Indeed, the optical spectra of the three colloids prepared by the different thiols discussed above exhibit only the gold plasmon band at 80 °C suggesting the solubilization of these superlattices at the elevated temperatures [49]. [Pg.246]

Mao and Mao invented a method for synthesizing supported metal catalysts with small metal nanoparticles (1-3 nm) even at high metal loadings (30-50 wt.%) [25]. The obtained metal catalysts exhibited superior electrocatalytic performance in fuel cells. In this invention, the unprotected metal nanocluster colloids prepared according... [Pg.336]

Caruso, F. and Sukhorukov, G. (2003) Coated Colloids Preparation, Characterization, Assembly and Utilization, in Multilayer Thin Films Sequential Assembly of Nanocomposite Materials (eds G. Decher and J. Schlenoff), Wiley-VCH, Weinheim, pp. 331-362. [Pg.440]

When high-specific-activity, non-colloidal preparations are administered (a) they are partitioned characteristically between liver and bone (b) in rodents the rate of loss of the liver burden is high (halftime = 6.5 to 10.8 d) (Durbin, 1973) (c) the spleen content is low and (d) autoradiographs show uniform distribution in hepatic cells rather than of phagocytosis of radioactive particles in the reticuloendothelial cells of the liver, spleen, and bone marrow, and there is deposition on bone surfaces. [Pg.53]

In 1996, Liu et al. reported the selective hydrogenation of cinnamaldehyde, an a,/ -unsaturated aldehyde, to cinnamyl alcohol, an a,/ -unsaturated alcohol, by means of PVP-protected Pt/Co bimetallic colloids prepared by the polyol process [111]. The colloids were obtained as a dark-brown homogeneous dispersion in a mixture of ethylene glycol and diethylene glycol, and characterized by TEM and XRD. These authors prepared different samples of nanoparticles with Pt Co ratios of 3 1 and 1 1, the mean diameters of which measured 1.7 and 2.2 nm, respectively. These colloidal systems were also compared with the single metal-... [Pg.245]

The quality of the colloidal preparation could be assessed after the mixing step. If small particles were formed, the mixture was transparent yellow with a blue-green Tyndall effect at the top of the fiask. The particle size was not affected by the evaporation step. [Pg.97]

To detect dynamic featnres of colloidal preparations, additional methods are required. Nuclear magnetic resonance spectroscopy allows a rapid, repeatable, and noninvasive measurement of the physical parameters of lipid matrices withont sample preparation (e.g., dilution of the probe) [26,27]. Decreased lipid mobility resnlts in a remarkable broadening of the signals of lipid protons, which allows the differentiation of SLN and supercooled melts. Because of the different chemical shifts, it is possible to attribute the nuclear magnetic resonance signal to particnlar molecnles or their segments. [Pg.7]

Koch U, Fojtik A, Weller H, Henglein A (1985) Photochemistry of semiconductor colloids preparation of extremely small ZnO particles, fluorescence phenomena and size quantization effects. Chem Phys Lett 122 507-510... [Pg.252]

The dye-sensitised solar cell (DSSC) is constructed as a sandwich of two conducting glass electrodes filled with a redox electrolyte. One of the electrodes is coated, using a colloidal preparation of monodispersed TiOj particles, to a depth of a few microns. The layer is heat treated to rednce resistivity and then soaked in a solution of the dye until a monomolecnlar dispersion of the dye on the TiO is obtained. The dye-coated electrode (photoanode) is then placed next to a connter electrode covered with a conducting oxide layer that has been platinised , in order to catalyse the reduction of the mediator. The gap between the two electrodes is filled with an electrolyte containing the mediator, an iodide/triodide conple in acetonitrile. The structure is shown schematically in Fignre 4.29. [Pg.293]

The polydivinybenzene colloids prepared by the aerosol technique were carbonized to yield uniform porous spheres of carbon of relative high specific surface areas (69). [Pg.107]

We point out here that the colloid prepared by these methods is very clean, because the carrier gas used is usually high-purity grade at six-nine, the chamber is once evacuated to depress the extent of contaminating oxygen and moisture, and the liquids themselves are always purified by sublimation process except for the solution trap method. To transfer the colloidal suspension after preparation, a specially designed stock bottle with a Luer-lock syringe is normally used in order to enable the operations under Ar flow to avoid unexpected air contamination. Therefore, we can carry the suspension liquid away from the production chamber without exposure to air, which means that the surface of colloidal metal is very clean if it does not react with suspension liquids. [Pg.523]

Fig. 9.4.12 Particle size of colloids prepared by a gas flow-sputtering method as a function of flowing gas pressure. Ethanol was used as a trapping medium. (From Ref. 16.)...

Fig. 9.4.25 Optical absorption spectra of copper colloid prepared by the gas flow-solution trap method as a function of lime development. The numbers in the figure are the time after the preparation of Lhe sample. The spectrum of sodium eihoxidc in ethanol (authentic sample) is also shown in the same figure, marked by b. The insertion is the expansion of the region of the isosbestic point. The deviation from the isosbestic point at 10 h after the preparation of colloids is shown by a in the insert. (From Ref. 26.)...

In subsequent sections of this chapter, we discuss further the distinction between macromolec-ular colloids and multiphase dispersions (Section 1.3), the use of the term stability in colloid science (Section 1.4), the size and shape of colloidal particles, the states of aggregation among particles, and the distribution of particle sizes that is typical of virtually all colloidal preparations (Section 1.5). The fact that particles in the colloidal size range are not all identical in size also requires a preliminary discussion of statistics, which is the subject of Section 1.5c and Appendix C. [Pg.2]

Paraknowitsch JP, Thomas A, Antonietti M. Carbon colloids prepared by hydrothermal carbonization as efficient fuel for indirect carbon fuel cells. Chem Mater. 2009 21 1170—5. [Pg.133]

It is intuitively more probable that the polar inorganic backbone of the oligomer interacts in some fashion with the surface of the metal. This speculation is supported by the fact that polyisobutylene, a purely paraffinic polymer, is ineffective in stabilizing the colloids in methylcyclohexane. Although we have not made a thorough investigation of this aspect of the chemistry of the colloid preparation, we have observed that a minimum ratio of aluminoxane (as monomer equivalents)to metal of ca. 5 is necessary to obtain a stable solution. Given this condition, the colloidal metal solutions are stable for months at room temperature, and can be heated to moderate temperatures without precipitation of bulk metal. [Pg.163]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...