Scheme coupling

Some final comments on the relevance of non-adiabatic coupling matrix elements to the nature of the vector potential a are in order. The above analysis of the implications of the Aharonov coupling scheme for the single-surface nuclear dynamics shows that the off-diagonal operator A provides nonzero contiibutions only via the term (n A n). There are therefore no necessary contributions to a from the non-adiabatic coupling. However, as discussed earlier, in Section IV [see Eqs. (34)-(36)] in the context of the x e Jahn-Teller model, the phase choice t / = —4>/2 coupled with the identity... [Pg.28]

A potential advantage of methods based on a series expansion of the free energy is that the convergence of the series is determined by the A dependence of the potential energy function meaning that the efficiency of the approach could be enhanced by a judicious choice of coupling scheme. [Pg.152]

The first finite element schemes for differential viscoelastic models that yielded numerically stable results for non-zero Weissenberg numbers appeared less than two decades ago. These schemes were later improved and shown that for some benchmark viscoelastic problems, such as flow through a two-dimensional section with an abrupt contraction (usually a width reduction of four to one), they can generate simulations that were qualitatively comparable with the experimental evidence. A notable example was the coupled scheme developed by Marchal and Crochet (1987) for the solution of Maxwell and Oldroyd constitutive equations. To achieve stability they used element subdivision for the stress approximations and applied inconsistent streamline upwinding to the stress terms in the discretized equations. In another attempt, Luo and Tanner (1989) developed a typical decoupled scheme that started with the solution of the constitutive equation for a fixed-flow field (e.g. obtained by initially assuming non-elastic fluid behaviour). The extra stress found at this step was subsequently inserted into the equation of motion as a pseudo-body force and the flow field was updated. These authors also used inconsistent streamline upwinding to maintain the stability of the scheme. [Pg.81]

The same relations (11) and (12) hold for the Gibbs free energy in the (N, p,T) ensemble. Equation (11) is also valid for a quanmm mechanical system. Note that for a linear coupling scheme such as Eq. (10), the first term on the right of Eq. (12) is zero the matrix of second derivatives can then be shown to be definite negative, so that the free energy is a concave function of the Xi. [Pg.177]

At this point the nomenclature used in XPS and AES should be explained. In XPS the spectroscopic notation is used, and in AES the X-ray notation. The two are equivalent, the different usage having arisen for historical reasons, but the differentiation is a convenient one. They are both based on the so-called j-j coupling scheme describing the orbital motion of an electron around an atomic nucleus, in which the... [Pg.7]

In X-ray notation the Auger transition shown in Fig. 2.1 would therefore be labeled KL2L3. In this coupling scheme, six Auger transitions would be possible in the KLL series. Obviously, many other series are possible (e. g., KLM, LMM, MNN). These are discussed more fully in Sect. 2.2, dealing with AES. [Pg.8]

Table 7.1 Number of possible spin coupling schemes for achieving an overall singlet state...

Figure 7.4 Representations of important spin coupling schemes in benzene...

Palladium-mediated catalysis has only been exploited relatively recently in the synthesis of substituted PPV derivatives. The use of aryl dibromides as monomers is particularly useful as it allows the synthesis of PPVs substituted with alkyl rather than alkoxy sidechains. The Suzuki [53, 54], Heck [55], and Stille [56] reactions have been used in the synthesis of new PPV derivatives, but attaining high molecular weight PPV derivatives by these methodologies has proved problematic. A phenyl-subslilutcd PPV material PPPV 31 was synthesized by a Suzuki coupling (Scheme 1-10) of dibromoethene and fo/.v-boronic acid 30. Its absorption (2ni ix=385 nm) and emission (2max=475 nm) maxima were strongly... [Pg.18]

The coupling reaction of aryl-alkenyl halides with alkenes in the presence of a palladium catalyst and a base is known as the Heck coupling (Scheme 9.4).6 Since the early 1980s, this type of coupling reaction has been used for die syndiesis of poly(arylenevinylene) and related polymers by polymerization of AB- or AA/BB-type of monomers (Scheme 9.5).7... [Pg.468]

Contact shifts give information on the electronic structure of the iron atoms, particularly on the valence distribution and on the magnetic coupling within polymetallic systems. The magnetic coupling scheme, which is considered later, fully accounts for the variety of observed hyperfine shifts and the temperature dependence. Thus, through the analysis of the hyperfine shifts, NMR provides detailed information on the metal site(s) of iron-sulfur proteins, and, thanks to the progress in NMR spectroscopy, also the solution structure 23, 24 ). [Pg.252]

For the computation of compressible flow, the pressure-velocity coupling schemes previously described can be extended to pressure-velocity-density coupling schemes. Again, a solution of the linearized, compressible momentum equation obtained with the pressure and density values taken from a previous solver iteration in general does not satisfy the mass balance equation. In order to balance the mass fluxes into each volume element, a pressure, density and velocity correction on top of the old values is computed. Typically, the detailed algorithms for performing this task rely on the same approximations such as the SIMPLE or SIMPLEC schemes outlined in the previous paragraph. [Pg.160]

Unfortunately, it quickly became apparent that a shortfall in this proposal was an inability to prepare the desired vinyl halide 25 in a straightforward and selective manner [19]. In contrast, we reasoned that the selective formation of an enol sulfonate, such as the enol triflate 26a, could be controlled by judicious tuning of enolization conditions starting from the corresponding ketone, and that such an enol sulfonate would possibly be a substrate for a palladium-mediated coupling (Scheme 9.17). In this way a common intermediate from the previously defined synthesis, that is, the racemic ketone rac-13 or its cyano equivalent rac-5 could be used to generate the required enamide. [Pg.255]

Figure 14. Liouville space coupling schemes and their respective double-sided Feynman diagrams for three of the six pathways in Liouville space which contribute to p 2. The complex conjugates are not shown. All pathways proceed only via coherences, created by the interactions with the two fields shown as incoming arrows. Solid curves pertain to e( 11 and dashed curves to r/2T (Reproduced with permission from Ref. 47, Copyright 2005 American Institute of Physics.)...

In an early work by Mertz and Pettitt, an open system was devised, in which an extended variable, representing the extent of protonation, was used to couple the system to a chemical potential reservoir [67], This method was demonstrated in the simulation of the acid-base reaction of acetic acid with water [67], Recently, PHMD methods based on continuous protonation states have been developed, in which a set of continuous titration coordinates, A, bound between 0 and 1, is propagated simultaneously with the conformational degrees of freedom in explicit or continuum solvent MD simulations. In the acidostat method developed by Borjesson and Hiinenberger for explicit solvent simulations [13], A. is relaxed towards the equilibrium value via a first-order coupling scheme in analogy to Berendsen s thermostat [10]. However, the theoretical basis for the equilibrium condition used in the derivation seems unclear [3], A test using the pKa calculation for several small amines did not yield HH titration behavior [13],... [Pg.270]

As was the case for the n-C3F7 group, the most prominent F—F coupling in the n-C4F9 group is usually the four-bond coupling (Scheme 6.21). [Pg.204]

Laio, A. VandeVondele, J. Rothlisberger, U., A Hamiltonian electrostatic coupling scheme for hybrid Car-Parrinello molecular dynamics simulations, J. Chem. Phys. 2002,116, 6941-6947... [Pg.422]

The presence of a remote C=C double bond in the alkyl halide was critical saturated analogs underwent nickel-catalyzed halogen-zinc exchange.248 It has been suggested that the double bond coordinates to the nickel atom. As a 7r-acceptor, the C=C bond removes some electron density from the metal, thus facilitating the reductive coupling (Scheme 154).246... [Pg.406]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...