Non-equilibrium states

Sohaublin S, FIdhener A and Ernst R R 1974 Fourier speotrosoopy of non-equilibrium states. Applioation to CIDNP, Overhauser experiments and relaxation time measurements J. Magn. Reson. 13 196-216... [Pg.2113]

Bain A D and Martin J S 1978 FT NMR of non-equilibrium states of oomplex spin systems I. A Liouville spaoe desoription J. Magn. Reson. 29 125-35... [Pg.2113]

Alloys can exist in non-equilibrium states - the Al-Cu example was an illustration. But it is always useful to know the equilibrium constitution. It gives a sort of base-line for the constitution of the real alloy, and the likely non-equilibrium constitutions can often be deduced from it. [Pg.325]

The third approach is called the thermodynamic theory of passive systems. It is based on the following postulates (1) The introduction of the notion of entropy is avoided for nonequilibrium states and the principle of local state is not assumed, (2) The inequality is replaced by an inequality expressing the fundamental property of passivity. This inequality follows from the second law of thermodynamics and the condition of thermodynamic stability. Further the inequality is known to have sense only for states of equilibrium, (3) The temperature is assumed to exist for non-equilibrium states, (4) As a consequence of the fundamental inequality the class of processes under consideration is limited to processes in which deviations from the equilibrium conditions are small. This enables full linearization of the constitutive equations. An important feature of this approach is the clear physical interpretation of all the quantities introduced. [Pg.646]

Figures 8(a) and (b). Removing H2 from the system induces the system into non-equilibrium state (B), and hydrogen production is going on to establish the next equilibrium state (C) by Le Chatelier s principle. The yield of H2 will be enhanced in the result.

CO2 in Figure 225(c) induces also non-equilibrium state and enhances CO2 production, then H2 productivity and purity are also enhanced. These separation processes would realize not only high-yield of H2, but also decrease of temperature of the endothermic reforming. It means that the separation process is important methodology for energy media transformation and chemical energy conversion. [Pg.388]

In contrast to the equilibrium electrode potential, the mixed potential is given by a non-equilibrium state of two different electrode processes and is accompanied by a spontaneous change in the system. Besides an electrode reaction, the rate-controlling step of one of these processes can be a transport process. For example, in the dissolution of mercury in nitric acid, the cathodic process is the reduction of nitric acid to nitrous acid and the anodic process is the ionization of mercury. The anodic process is controlled by the transport of mercuric ions from the electrode this process is accelerated, for example, by stirring (see Fig. 5.54B), resulting in a shift of the mixed potential to a more negative value, E mix. [Pg.392]

The glass transition involves additional phenomena which strongly affect the rheology (1) Short-time and long-time relaxation modes were found to shift with different temperature shift factors [93]. (2) The thermally introduced glass transition leads to a non-equilibrium state of the polymer [10]. Because of these, the gelation framework might be too simple to describe the transition behavior. [Pg.206]

Table 2 is a summary of the experimental results from all methods This table gives the ratio of each concentration obtained from the DSC, the PFC, the TF, and the FP to that from the ACC, and the ratio of each value from the ERM and the PRM to that from the PFC. The results in Table 2 show that good agreement was obtained between the DSC and the ACC. However, the ratio of the results from the PFC to that of the ACC was 1.15 0.33. Furtheremore, the value obtained from the TF was usually smaller than that from the ACC, and the mean value was 0.68 0.18. The value obtained from the FP was smaller than that obtained from the ACC. This results is because radon and its daughters are usually at non-equilibrium state in the atmosphere. [Pg.170]

The difference between equilibrium and non-equilibrium systems exists in the time-dependence of the latter. An example of a non-equilibrium property is the rate at which a system absorbs energy when stirred by an external influence. If the stirring is done monochromatically over a range of frequencies an absorption spectrum is generated. Another example of a non-equilibrium property is the relaxation rate by which a system reaches equilibrium from a prepared non-equilibrium state. [Pg.485]

We saw in Figure 9.15 how photon absorption leads to the excitation of an electron from the ground state to the first excited state. It is usual for the excited-state structure to form in a non-equilibrium state, so it must subsequently rearrange to achieve a lower energy. [Pg.456]

If, on the other hand, the mixing time step were done last, the fast chemical reactions would be left in an unphysical non-equilibrium state. Taking the reaction step last avoids this problem. [Pg.329]

The final solid solution-aqueous solution compositions of Table I will fall into one of three catagories (1) they will either be at equilibrium, (2) at stoichiometric saturation, or (3) correspond to some non-equilibrium state. [Pg.563]

Having described the equilibrium structure and thermodynamics of the vapor condensate we then re-examine homogeneous nucleation theory. This combination of thermodynamics and rate kinetics, in which the free energy of formation is treated as an activation energy in a monomer addition reaction, contains the assumption that equilibrium thermodynamic functions can be applied to a continuum of non-equilibrium states. For the purpose of elucidating the effects of the removal of the usual approximations, we retain this assumption and calculate a radially dependent free energy of formation. Ve find, that by removing the conventional assumptions, the presumed thermodynamic barrier to nucleation is absent. [Pg.18]

An important point is that the initial non-equilibrium state largely determines the relative contributions of exchange and normal spin-lattice relaxation to the re-establishment of equilibrium. We have a good deal of control over the initial state, so we can enhance or suppress particular processes. For example, if the magnetizations in both sites are inverted, the return to equilibrium will be dominated by spin relaxation providing the... [Pg.242]

The theory of nuclear spin relaxation (see monographs by Slichter [4], Abragam [5] and McConnell [6] for comprehensive presentations) is usually formulated in terms of the evolution of the density operator, cr, for the spin system under consideration from some kind of a non-equilibrium state, created normally by one or more radio-frequency pulses, to thermal equilibrium, described by Using the Bloch-Wangsness-Redfield (BWR) theory, usually appropriate for the liquid state, we can write [7, 8] ... [Pg.328]

The preparation period consists of the creation of a non-equilibrium state and, possibly, of the frequency labeling in 2D experiments. Usually, the preparation period should be designed in such a way that in the created non-equilibrium state, the population differences or coherences under consideration deviate as much as possible from the equilibrium values. During the relaxation period, the coherences or populations evolve towards an equilibrium (or a steady-state) condition. The behavior of the spin system during this period can be manipulated in order to isolate one specific type of process. The detection period can contain also the mixing period of the 2D experiments. The purpose of the detection period is to create a signal which truthfully reflects the state of the spin system at the end of the relaxation period. As always in NMR, sensitivity is a matter of prime concern. [Pg.331]

A simple way to prepare a non-equilibrium state of the longitudinal magnetization is to invert the equilibrium magnetization (or its NOE-enhanced counterpart) by a tt pulse. This preparation is used in the classical inversion-recovery (IR) method as described by Void et al. [24] in the early... [Pg.333]

T. T. Nakashima, K. J. Harris and R. E. Wasylishen, Pulse FT NMR of non-equilibrium states of half-integer spin quadrupolar nuclei in single crystals. /. Magn. Reson., 2010, 202,162-172. [Pg.111]

An unusually long equilibration time has been observed upon melting of a single crystal of the AA polymorph of [C4CiIm]Cl Crystal (1) heated rapidly from room temperature to 72°C to form a droplet of liquid in a non-equilibrium state [50]. Raman versus time spectra are reproduced in Figure 12.18. [Pg.334]

The pulse sequence starts with a preparation period P, which usually allows the ensemble of spins - still partially perturbed by the pulses applied in the preceding scan -to return back to the equilibrium state. The preparation period may also be used to force this ensemble of spins to a defined non-equilibrium state according to the operators needs. [Pg.44]

Physically the extraction of a subensemble means that one prepares the system in a certain non-equilibrium state. One expects that after a long time the system returns to equilibrium, i.e.,... [Pg.87]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...