HomeCompetition ExamsAir Force Common Admission Test

AFCAT 1 2025 Exam - Notification (Out), Application form (Released), Eligibility, Syllabus

Ongoing Event
AFCAT Application Date : 02 Dec' 2024 - 31 Dec' 2024
Updated on 02nd December, 2024 by Namritha Bachwal

About AFCAT 2025

Indian Air Force has released official AFCAT 1 2025 notification on December 2, 2024 in online mode at the official website. The AFCAT 1 2025 application form link has also been activated on the website. Candidates can fill the AFCAT 1 application form 2025 till December 31, 2024. The AFCAT 1 2025 exam dates are February 22 and 23, 2024. The authority also announced the number of AFCAT 1 2025 vacancies which is 336. 

The AFCAT 2025 exam is conducted in two stages – an online test and an SSB interview conducted by the Air Force Selection Board (AFSB). Candidates applying for Ground Duty (Technical branch) appear for an additional Engineering Knowledge Test (EKT).

IAF conducts AFCAT twice a year in February and September to recruit eligible candidates as Commissioned/ Class 1 Gazetted Officers in Flying, Ground Duty (Technical and Non-Technical branches) and Meteorology entry for grant of Permanent/ Short Service Commission in the Indian Air Force. 

AFCAT is a gateway for both male and female candidates who wish to join the Indian Air Force. Candidates will be selected based on their performance in the online exam as well as the Air Force Selection Board (AFSB) interview.


AFCAT Exam 2025 - Highlights

ParticularsDetails

Exam Name

Air Force Common Admission Test (AFCAT)

Exam Conducting Body

Indian Air Force (IAF)

Exam Level

National

Frequency of Exam

Twice a year (February & September)

AFCAT Exam Mode 

Online

Exam Syllabus

AFCAT: General Awareness, Verbal Ability in English, Numerical Ability and Reasoning and Military Aptitude Test

EKT: Mechanical, Computer Science and Electrical & Electronics

AFCAT Exam Pattern

AFCAT: 100 objective-type questions of 300 marks

EKT: 50 questions of 150 marks

Medium of Exam 

English

AFCAT Application mode and fees

Online and Rs. 550 + GST (No reservation irrespective of religion, caste and gender)

Vacancies
AFCAT 01/2025- 336
AFCAT 02/2025- TBA

AFCAT Contact Details

Contact number: 020-25503105 or 020-25503106
Official email ID: afcat.cdac.in

Read more

AFCAT 2025 Highlights

Full Exam Name
Air Force Common Admission Test
Short Exam Name
AFCAT
Conducting Body
Indian Air Force
Frequency Of Conduct
Twice a year
Exam Level
National Level Exam
Languages
English
Mode Of Application
online
Application Fee
Online : 550
Mode Of Exam
online
Mode Of Counselling
online +1 more
Exam Duration
2 Hours 27 Minutes
No Of Seats
336

AFCAT Important Dates

AFCAT Air Force Common Admission Test (session 2025)

02 Dec' 2024 - 31 Dec' 2024 . OnlineOn Going
Application Date
Application form
07 Feb' 2025 - 07 Feb' 2025 . Online
Admit Card Date
Admit card
22 Feb' 2025 - 23 Feb' 2025 . Online
Exam Date
AFCAT 1 exam
02 Dec' 2024 - 02 Dec' 2024 . Online
Advertisement Date
Official Notification

IAF announces the AFCAT 1 2025 result in online mode at the official website. To check AFCAT result 2025, candidates will have to visit the AFCAT website and log in using their email ID, password and captcha code. AFCAT exam result 2025 displays the qualifying status of candidates. Candidates qualifying in the online test will be eligible to appear in the next round and they will be called by IAF for the AFSB Interview. 

How to check the result of AFCAT 2025?

  • Visit the official website

  • Login in the candidate window using your credentials

  • Click on the AFCAT result link on this page

  • The result will appear on your screen

  • Download and take the printout of the result

AFCAT 2025 Result – Details printed on the result

  • Registration number

  • Name of the candidate

  • AFCAT cut off

  • Obtained score

  • Qualifying status

 AFCAT 2025 Result – How the final score will be calculated?

Below is the marking scheme of AFCAT 2025 –

  • 3 marks are awarded for every correct answer

  • 1 mark is deducted for every incorrect 

  • No marks will be awarded for unattempted questions

Candidates scores will be calculated based on the number of their correct answers after deducting the penalty for wrong answers.

What after the declaration of AFCAT result 2025?

IAF will prepare a list of candidates who have obtained the minimum qualifying marks (cut off marks) in the exam. Candidates qualifying the online test will be called at one of the Air Force Selection Boards (AFSB) for further rounds. The AFSB centres located at Dehradun (1 AFSB), Mysuru (2 AFSB), Gandhinagar (3 AFSB) and Varanasi (4 AFSB). 

Only those candidates who have opted for Flying Branch can opt for Dehradun, Mysore and Varanasi. Candidates need to choose an AFSB date and venue to download AFSB Interview call letter.

The AFSB Interview will be conducted in three stages. The first stage will be Officer Intelligence Rating Test along with Picture Perception and discussion test. The second stage will be a Psychological test. The third stage will be the Computerised Pilot Selection System (CPSS) which will be conducted only for the candidates who have opted for Flying Branch.

AFCAT Result 2025- Preparation of Final Merit List

A candidate's final selection in AFCAT will be done based on their own performance in the online test as well as the AFSB Interview. Separate cut off marks are fixed for the online test and AFSB Interview by IAF. Candidates will be placed in order of merit on the basis of their total score in both online tests as well as AFSB. 

Finally, candidates will be allotted in Permanent Commission/Short Service Commission in Ground Duty (Technical and Non-Technical) branches based on the number of vacancies released by IAF, candidate's performance in the selection process and choices given by the candidates.

EKT

Nationality: Candidates must be citizens of India

Age Limit: Candidates applying for Ground Duty (Technical), the age limit is 20 to 26 years of age

Marital Status: Candidates below the age of 25 years must be unmarried. Widows/ widowers and divorcees below 25 years of age are not eligible to apply for the exam

Educational Qualification: Candidates who have opted for Ground Duty (Technical branch) should hold the following educational qualification to be eligible for the examination:

Aeronautical Engineer (Electronics) {AE(L)}: Candidates having passed class 12 with 60% or more in Physics and Mathematics and additionally holding four years Bachelor’s degree/integrated post-graduation degree in Engineering/Technology from a recognized university.

Or

Candidates clearing sections A and B exam of Associate Membership of Institution of Engineers (India)/ Aeronautical Society of India/ Graduate membership exam of Institution of Electronics and Telecommunication Engineers with at least 60% in the following discipline:

  • Communication Engineering
  • Computer Engineering/Technology
  • Computer Engineering and Application
  • Computer Science and Engineering/Technology
  • Electrical and Computer Engineering
  • Electrical and Electronics Engineering
  • Electrical Engineering
  • Electronics Engineering/Technology
  • Electronics Science and Engineering
  • Electronics
  • Electronics and Communication Engineering
  • Electronics and Computer Science
  • Electronics and/or Telecommunication Engineering
  • Electronics and/or Telecommunication Engineering (Microwave)
  • Electronics and Computer Engineering
  • Electronics Communication and Instrumentation Engineering
  • Electronics Instrument & Control
  • Electronics Instrument & Control Engineering
  • Instrumentation & Control Engineering
  • Instrument & Control Engineering
  • Information Technology

Aeronautical Engineer (Mechanical) {AE (M)}: Candidates with minimum 60% in Mathematics and Physics in class 12 and bachelor’s degree (4 years)/integrated post graduation in Engineering/ Technology from a recognized university are eligible to apply for the exam. Candidates who have cleared section A and B exam of Associate Membership of Institution of Engineers (India)/Aeronautical Society of India with a minimum of 60% in any of the disciplines mentioned below:

  • Aerospace Engineering
  • Aeronautical Engineering
  • Aircraft Maintenance Engineering
  • Mechanical Engineering
  • Mechanical Engineering and Automation
  • Mechanical Engineering (Production)
  • Mechanical Engineering (Repair and Maintenance)
  • Mechatronics
  • Industrial Engineering

AFCAT

AFCAT eligibility criteria are prescribed by Indian Air Force (IAS) along with the notification. The eligibility criteria of AFCAT exam are provided below.

Nationality: Candidates must be citizens of India

AFCAT Age Limit 2025: Candidates applying for Flying Branch should be between 20 to 24 years of age while for Ground Duty (Non-Technical) candidates, the AFCAT exam age limit is 20 to 26 years of age

Marital Status: Candidates below the age of 25 years must be unmarried. Widows/ widowers and divorcees below 25 years of age are not eligible to apply for the exam

Educational Qualification:

For Flying branch

Candidates must have passed class 12 with minimum 60% in both Mathematics and Physics and

  • hold a Bachelor’s degree (3 years) in any discipline from a recognised university.

Or

  • hold B.Tech/ BE degree with minimum 60% from a recognised university

Or

  • have cleared section A and B exam of Associate Membership of Institution of Engineers (India)/ Aeronautical Society of India with minimum 60% from a recognised university

For Ground Duty (Non-Technical branch)

Administration and Logistics: Candidates should hold bachelor’s degree of minimum three years from a recognised university in any discipline with minimum 60% or equivalent or should clear section A and B examination of Associate Membership of Institution of Engineers (India)/ Aeronautical Society of India from a recognised university with 60% or more

Accounts: B.Com degree with at least 60%

Education: MBA/ MCA/ MA/ MSc degree in English/ Physics/ Mathematics/ Chemistry/ Statistics/ International Relations/ International Studies/ Defence Studies/ Psychology/ Computer Science/ IT/ Management/ Mass Communication/ Journalism/ Public Relation with 50% aggregate and 60% during graduation. For integrated courses, the minimum duration should be in accordance to the UGC guidelines with a minimum aggregate of 50%.

Indian Air Force has activated the AFCAT 1 2025 application form link on December 2, 2024. Candidates who meet the minimum eligibility can apply for the AFCAT exam. IAF will also provide the AFCAT 1 2025 application form correction window in online mode. Candidates have to pay the mandatory application fee of Rs. 550+ GST via credit/debit cards and net banking. 

To apply for the AFCAT exam, candidates must first register/sign up on the official website. After successfully signing up, candidates could fill the AFCAT application form by entering their personal details, education qualification details, course preference, communication details, uploading of documents, and selection of exam city followed by the signing of the declaration. 

Candidates have to choose their selection of entry. After filling in all the relevant and mandatory information, candidates can pay the AFCAT application fee. After making the online payment they can also check ‘Payment Status’. If the registration number is displayed in the ‘Payment Status’ then their application is successfully submitted.

Steps to fill AFCAT application form 2025

  • Sign Up

  • Fill AFCAT application Form

  • Upload Photo, Signature and Thumb Impression

  • Pay Application fee of AFCAT

Documents required to fill the AFCAT 2025 Application Form

Document

Format

Size

Photograph

JPG/JPEG


10 kb to 50 kb


Signature

Thumb impression (left thumb for male applicants and right thumb for female applicants)

Details required to keep while applying for AFCAT

  • Class 10 and 12 certificate and details

  • Valid Email

  • Valid working Mobile Number

  • Aadhaar Card details

AFCAT Question/Sample papers

Candidates can download AFCAT question papers along with answers from here.

Free Download

Documents Required at Exam AFCAT 2025

Air Force Common Admission Test 2025

  • Aadhaar card
  • PAN card
  • Passport
  • Driving license
  • Voter card
  • College Identity card
  • AFCAT Admit card

AFCAT 2025 Exam Centers

StateCity
Tripura
Agartala
Uttar Pradesh
Agra
Aligarh
Allahabad
Bareilly
Gorakhpur
Jhansi
Kanpur
Lucknow
Meerut
Varanasi
Gujarat
Ahmedabad
Bhuj
Rajkot
Vadodara
Mizoram
Aizawl
Haryana
Ambala
Hisar
Kurukshetra
Rohtak
Punjab
Amritsar
Jalandhar
Pathankot
Odisha
Berhampur
Bhubaneswar
Rourkela
Sambalpur
Karnataka
Belgaum
Bangalore
Mangalore
Mysore
Bihar
Bhagalpur
Darbhanga
Patna
Chhattisgarh
Bhilai
Madhya Pradesh
Bhopal
Gwalior
Indore
Jabalpur
Ujjain
Rajasthan
Bikaner
Ganganagar
Jaipur
Jodhpur
Kota
Udaipur
Chandigarh
Chandigarh
Tamil Nadu
Chennai
Coimbatore
Madurai
Tirunelveli
Vellore
Uttarakhand
Dehradun
Haldwani
Roorkee
Delhi
New Delhi
Jharkhand
Dhanbad
Jamshedpur
Ranchi
Daman and Diu
Diu
West Bengal
Durgapur
Jalpaiguri
Kharagpur
Kolkata
Andhra Pradesh
Guntur
Kakinada
Tirupati
Vijayawada
Visakhapatnam
Assam
Guwahati
Jorhat
Silchar
Tinsukia
Telangana
Hyderabad
Nizamabad
Warangal
Manipur
Imphal
Arunachal Pradesh
Itanagar
Jammu and Kashmir
Jammu
Leh
Srinagar
Kerala
Kannur
Kochi
Thiruvananthapuram
Thrissur
Nagaland
Kohima
Maharashtra
Kolhapur
Mumbai
Nagpur
Nashik
Pune
Solapur
Thane
Andaman and Nicobar Islands
Port Blair
Puducherry
Puducherry
Meghalaya
Shillong
Himachal Pradesh
Shimla

EKT

Candidates applying for Ground Duty (Technical branch) must appear for additional online test - Engineering Knowledge Test (EKT). The test is held for half an hour immediately after the completion of AFCAT online test. The exam pattern of AFCAT Engineering Knowledge Test is given below.

AFCAT exam pattern for Engineering Knowledge Test (EKT):

Exam

Sections

Number of questions

Total marks

Duration

EKT

Mechanical

50

150

45 minutes

Computer Science

Electrical and Electronics

AFCAT

The exam pattern of AFCAT is provided by Indian Air Force (IAF). The exam pattern allots details such as the number of questions, duration and total number of marks of the exam. AFCAT exam pattern for the various exam stages have been provided below.

AFCAT Exam Pattern for Online Test:

Exam

Sections

Number             of questions

Total             marks

Duration

AFCAT

General Awareness

100

300

120             minutes

Verbal Ability

Numerical Ability

Reasoning and Aptitude Test


Marking Scheme:

For correct answer: 3 marks

For incorrect responses: 1 mark

For unattempted questions: No marks

Other Competition Exams

Graduate Record Exam
Apply for GRE® Test now & save 10% with ApplyShop Gift Card | World's most used Admission Test for Graduate & Professional Schools
Test of English as Foreign Language
Accepted by more than 11,000 universities in over 150 countries worldwide

AFCAT 2025 Syllabus

AFCAT EKT Syllabus

Computer science engineering: Unit 01


Engineering mathematics
  • Matrix algebra, Eigen values and Eigen vectors, theorems of integral calculus, partial derivatives, maxima and minima, multiple integrals, Stokes, Gauss, and Green’s theorems
  • First order differential equation (linear and nonlinear), Cauchy’s and Euler’s equations, complex variables, Taylor’s and Laurent’ series, sampling theorems, mean, median, mode, and standard deviation, random variables
  • Discrete and continuous distributions, Fourier transform, Laplace transform, Z transform

Computer science engineering: Unit 02


Engineering physics
  • Units for measurement, description of motion in one, two, and three dimensions, laws of motion, work, energy, and power, rotational motion, gravitation, heat and thermodynamics, electrostatics, electric current, magnetic effect of currents
  • Magnetism, electromagnetic induction and alternating currents, and electromagnetic waves, ray optics and optical Instruments

Computer science engineering: Unit 03


Engineering drawing
  • Projection of straight line, planes and solids, intersection of surfaces, isometric projection, sectional views of solids, full section, introduction to computer aided drafting

Computer science engineering: Unit 04


Analog and digital electronics
  • Characteristics of diodes, BJT, FET, JFET, and MOSFET, amplifiers-biasing, equivalent circuit, and frequency response, oscillators and feedback amplifiers, operational amplifiers-characteristics and applications, simple active filters, VCOs and timers
  • Combinational and sequential logic circuits, multiplexer, Schmitt trigger, multi-vibrators, sample and hold circuits, A/D and D/A converters, 8-bit microprocessor basics, architecture, programming and interfacing

Computer science engineering: Unit 05


Electronic devices
  • Energy bands in silicon, intrinsic and extrinsic silicon, carrier transport in silicon-diffusion current, drift current, mobility, and resistivity
  • Generation and recombination of carriers, p-n junction diode, Zener diode, tunnel diode, BJT, JFET, MOS capacitor, MOSFET, LED, PIN, and avalanche photo diode, basics of LASER

Computer science engineering: Unit 06


Computer networks
  • ISO/OSI stack, LAN technologies (ethernet, token ring), flow and error control techniques, congestion control, TCP/UDP and sockets, IPv4, application layer protocols (icmp, dns, smtp, pop, ftp, http), basic concepts of hubs, switches, gateways and routers
  • Network security-basic concepts of public key and private key cryptography, digital signature, firewalls
  • Basic concepts of client-server computing

Computer science engineering: Unit 07


Network theory design
  • Thevenin's, Norton's, reciprocity, superposition, compensation, Miller’s, Tellegen’s, and maximum power transfer theorems
  • Impulse, step, ramp and sinusoidal response analysis of first order and second order circuits
  • Two port parameters and their interrelations, application of Laplace transform and Fourier series in the context of network analysis, network synthesis

Computer science engineering: Unit 08


Switching theory
  • Traffic definitions, introduction to switching networks, classification of switching systems
  • Grade of service and blocking probability, basics of circuit switching and packet switching
  • Network traffic load and parameters, modelling of switching systems, incoming traffic and service time characterisation, blocking models and loss estimates
  • Delay systems-Markovian queuing model, M/M/1 model, limited queue capacity, multiple server, finite sources, queue discipline

Computer science engineering: Unit 09


Information technology
  • Operating system-processes, threads, interprocess communication, concurrency, synchronization, deadlock, CPU scheduling, memory management and virtual memory, file systems, I/O systems, protection and security
  • RDBMS-ER model, relational model (relational algebra, tuple calculus), database design (integrity constraints, normal forms), query languages (SQL), file structures (sequential files, indexing, B and B+ trees), transactions and concurrency control
  • Software engineering-Information gathering, requirement and feasibility analysis, data flow diagrams, process specifications, input/output design, process life cycle, planning and managing the project, design, coding, testing, implementation, maintenance
  • Programming in C, object oriented programming, basics of computer graphics

Computer science engineering: Unit 10


Electrical engineering
  • Single phase transformer-equivalent circuit, phasor diagram, tests, regulation and efficiency, auto-transformer, energy conversion principles, DC machines-types, windings, generator characteristics, armature reaction and commutation
  • Servo and stepper motors, synchronous machines, generators-regulation and parallel operation

Computer science engineering: Unit 11


Control engineering
  • Application of open loop and closed loop systems, principles of feedback, determination of transfer function by block diagram reduction method, time domain analysis of first and second order systems
  • Transient and steady-state errors, damping and oscillations

Computer science engineering: Unit 12


Telecommunication systems
  • Analog communication-amplitude and angle modulation and demodulation systems, superheterodyne receivers, signal-to-noise ratio (SNR), fundamentals of information theory and channel capacity theorem
  • Digital communication systems-pulse code modulation (PCM), differential pulse code modulation (DPCM), digital modulation schemes: Amplitude, phase and frequency shift keying schemes (ASK, PSK, FSK), basics of TDMA, FDMA and CDMA
  • Fundamentals of mobile communication
  • Fundamentals of optical fibre communication

Computer science engineering: Unit 13


Microwave engineering
  • Wave guides, klystrons, travelling wave tubes, magnetron, introduction to microstrip lines, microwave semiconductor devices, monolithic microwave integrated circuits

Computer science engineering: Unit 14


Antenna and wave propagation
  • Antenna parameters, effective length and aperture, gain, beamwidth, directivity, radiation resistance, efficiency, polarization, impedance and directional characteristics of antenna, reflection, refraction, interference and diffraction of radio waves
  • Fundamentals ground wave, space wave, sky wave and troposcatter propagation

Computer science engineering: Unit 15


Radar theory
  • Radar range equation, frequencies of operation, fundamentals of moving target indicator (MTI), pulse doppler radar, tracking radar

Computer science engineering: Unit 16


Instrumentation
  • Accuracy, precision and repeatability, electronic instruments for measuring basic parameters, theory of oscilloscopes, signal generators, signal analysers, characteristics and construction of transducers

Electrical and electronics engineering: Unit 01


Engineering mathematics
  • Matrix algebra, Eigen values and Eigen vectors, theorems of integral calculus, partial derivatives, maxima and minima, multiple integrals, Stokes, Gauss, and Green’s theorems
  • First order differential equation (linear and nonlinear), Cauchy’s and Euler’s equations, complex variables, Taylor’s and Laurent’ series, sampling theorems, mean, median, mode, and standard deviation, random variables
  • Discrete and continuous distributions, Fourier transform, Laplace transform, Z transform

Electrical and electronics engineering: Unit 02


Engineering physics
  • Units for measurement, description of motion in one, two and three dimensions, laws of motion, work, energy, and power, rotational motion, gravitation, heat and thermodynamics, electrostatics, electric current, magnetic effect of currents
  • Magnetism, electromagnetic induction and alternating currents and electromagnetic waves, ray optics and optical Instruments

Electrical and electronics engineering: Unit 03


Engineering drawing
  • Projection of straight line, planes and solids, intersection of surfaces, isometric projection, sectional views of solids, full section, introduction to computer aided drafting

Electrical and electronics engineering: Unit 04


Analog and digital electronics
  • Characteristics of diodes, BJT, FET, JFET, and MOSFET, amplifiers-biasing, equivalent circuit, and frequency response, oscillators and feedback amplifiers, operational amplifiers-characteristics and applications, simple active filters, VCOs and timers
  • Combinational and sequential logic circuits, multiplexer, Schmitt trigger, multi-vibrators, sample and hold circuits, A/D and D/A converters, 8-bit microprocessor basics, architecture, programming and interfacing

Electrical and electronics engineering: Unit 05


Electrical engineering
  • Single phase transformer-equivalent circuit, phasor diagram, tests, regulation and efficiency, three phase transformers-connections, parallel operation, autotransformer
  • Energy conversion principles, DC machines-types, windings, generator characteristics, armature reaction and commutation, starting and speed control of motors, single phase and three phase induction motors-principles, types, performance characteristics
  • Starting and speed control, starting motors, servo and stepper motors, synchronous machines generators-performance, regulation and parallel operation

Electrical and electronics engineering: Unit 06


Electronic devices
  • Energy bands in silicon, intrinsic and extrinsic silicon, carrier transport in silicon-diffusion current, drift current, mobility, and resistivity
  • Generation and recombination of carriers, p-n junction diode, Zener diode, tunnel diode, BJT, JFET, MOS capacitor, MOSFET, LED, PIN, and avalanche photo diode, basics of LASER
  • Device technology-integrated circuits fabrication process, oxidation, diffusion, ion implantation, photolithography, n-tub, p-tub and twin-tub CMOS process

Electrical and electronics engineering: Unit 07


Control engineering
  • Application of open loop and closed loop systems, principles of feedback, determination of transfer function by block diagram reduction method, time domain analysis of first and second order systems, transient and steady-state errors
  • Damping and oscillations, Routh and Nyquist techniques, Bode plots, Root loci, lag, lead and lead-lag compensation, state space model, state transition matrix, controllability and observability

Electrical and electronics engineering: Unit 08


Telecommunication systems
  • Random signals and noise-probability, random variables, probability density function, autocorrelation, power spectral density
  • Analog communication-amplitude and angle modulation and demodulation systems, spectral analysis of these operations, superheterodyne receivers, elements of hardware, realisations of analog communication systems
  • Signal-to-noise ratio (SNR) calculations for AM and FM
  • Fundamentals of information theory and channel capacity theorem
  • Digital communication systems-pulse code modulation (PCM), differential pulse code modulation (DPCM), digital modulation schemes: Amplitude, phase and frequency shift keying schemes (ASK, PSK, FSK), matched filter receivers
  • Bandwidth consideration and probability of error calculations for these schemes
  • Basics of TDMA, FDMA, and CDMA
  • Fundamentals of mobile communication
  • Fundamentals of optical fibre communication

Electrical and electronics engineering: Unit 09


Microwave engineering
  • Wave guides, waveguide components, klystrons, travelling wave tubes, magnetron, microwave measurements, introduction to microstrip lines, microwave network analysis, microwave semiconductor devices, monolithic microwave integrated circuits

Electrical and electronics engineering: Unit 10


Antenna and wave propagation
  • Antenna parameters, radiation from a current element in free space, reciprocity theorem, resonant and non-resonant antenna, effective length and aperture, gain, beamwidth, directivity, radiation resistance, efficiency, polarization
  • Impedance and directional characteristics of antenna, antenna temperature
  • Phased array antenna, mechanism of radio wave propagation, reflection, refraction, interference and diffraction of radio waves
  • Theory of ground wave, space wave, sky wave and troposcatter propagation

Electrical and electronics engineering: Unit 11


Instrumentation
  • Accuracy, precision and repeatability, electronic instruments for measuring basic parameters, theory of oscilloscopes, signal generators, signal analysers, characteristics and construction of transducers

Electrical and electronics engineering: Unit 12


Computer networks
  • ISO/OSI stack, LAN technologies (ethernet, token ring), flow and error control techniques, congestion control, TCP/UDP and sockets, IPv4, application layer protocols (icmp, dns, smtp, pop, ftp, http), basic concepts of hubs, switches, gateways and routers

Electrical and electronics engineering: Unit 13


Network theory design
  • Thevenin's, Norton's, reciprocity, superposition, compensation, Miller’s, Tellegen’s, and maximum power transfer theorems
  • Impulse, step, ramp and sinusoidal response analysis of first order and second order circuits
  • Two port parameters and their interrelations, application of Laplace transform and Fourier series in the context of network analysis, network synthesis

Electrical and electronics engineering: Unit 14


Switching theory
  • Traffic definitions, introduction to switching networks, classification of switching systems
  • Grade of service, basics of circuit switching and packet switching

Electrical and electronics engineering: Unit 15


Information technology
  • Fundamentals of operating system, RDBMS terminologies, object oriented programming, basics of computer graphics

Electrical and electronics engineering: Unit 16


Radar theory
  • Radar range equation, frequencies of operation, fundamentals of moving target indicator (MTI), pulse doppler radar, tracking radar

Mechanical engineering: Unit 01


Engineering mathematics
  • Matrix algebra, Eigen values and Eigen vectors, theorems of integral calculus, partial derivatives, maxima and minima, multiple integrals, Stokes, Gauss, and Green’s theorems
  • First order differential equation (linear and nonlinear), Cauchy’s and Euler’s equations, complex variables, Taylor’s and Laurent’ series, sampling theorems, mean, median, mode, and standard deviation, random variables
  • Discrete and continuous distributions, Fourier transform, Laplace transform, Z transform

Mechanical engineering: Unit 02


Engineering physics
  • Units for measurement, description of motion in one, two, and three dimensions, laws of motion, work, energy, and power, rotational motion, gravitation, heat and thermodynamics, electrostatics, electric current, magnetic effect of currents
  • Magnetism, electromagnetic induction and alternating currents and electromagnetic waves, ray optics and optical Instruments

Mechanical engineering: Unit 03


Engineering graphics/engineering drawing
  • Principles of orthographic projections, projections of points, lines, planes and solids, section of solids, isometric views, Auto-CAD

Mechanical engineering: Unit 04


Engineering mechanics
  • Equations of equilibrium in space and its application, first and second moments of area, simple problems on friction, kinematics of particles for plane motion, elementary particle dynamics
  • Generalized Hooke’s law and its application, design problems on axial stress, shear stress and bearing stress, material properties for dynamic loading, bending shear and stresses in beams
  • Determination of principle stresses and strains-analytical and graphical, material behaviour and design factors for dynamic load, design of circular shafts for bending and torsional load only
  • Deflection of beam for statically determinate problems, theories of failure

Mechanical engineering: Unit 05


Thermodynamics
  • Basic concept of first law and second law of thermodynamics, concept of entropy and reversibility, availability and unavailability and irreversibility
  • Classification and properties of fluids, incompressible and compressible fluids flows, effect of Mach number and compressibility, continuity momentum and energy equations, normal and oblique shocks, one dimensional isentropic flow
  • Flow or fluids in duct with frictions that transfer
  • Flow through fans, blowers and compressors, axial and centrifugal flow configuration, design of fans and compressors

Mechanical engineering: Unit 06


Theory of machines
  • Kinematic and dynamic analysis of plane mechanisms
  • Cams, Gears and epicyclic gear trains, flywheels, governors, balancing of rigid rotors, balancing of single and multicylinder engines, linear vibration analysis of mechanical systems (single degree of freedom), Critical speeds and whirling of shafts
  • Flywheels, balancing of rotors and reciprocating machinery, balancing machines, governors, free and forced vibration of damped and undamped single degree of freedom systems, isolation, whirling of shafts, gyroscope

Mechanical engineering: Unit 07


Fluid mechanics/hydraulic machines
  • Fluid flow concepts, tansport theorem, fluid kinematics, potential flow, governing equations of fluid flow, dimensional analysis, viscous flow, boundary layer flows, turbulence, closed conduit flows, hydrodynamic lubrication, free surface flow
  • Compressible flows, hydraulic turbines: Impulse and reaction turbines, centrifugal and axial flow pumps

Mechanical engineering: Unit 08


Manufacturing science
  • Foundry technology, melting furnaces, special casting processes, gating and riser design, casting defects, arc welding, TIG, MIG, submerged arc, resistance welding, gas welding, flash butt welding, solid state welding, welding metallurgy
  • Forming technology, powder metallurgy

Mechanical engineering: Unit 09


Materials science
  • Basic concepts on structure of solids, common ferrous and nonferrous materials and their applications, heat-treatment of steels, non-metals-plastics, ceramics, composite materials, and nano-materials

Mechanical engineering: Unit 10


Machine drawing
  • Development and intersection of surfaces, conventional representation of machine elements, materials, surface finish and tolerances-sectional views and additional views, drawing of screw threads, locking devices, fasteners, keys and cotters
  • Knuckle joints, riveted joints, shaft couplings and bearings-pipe joints, assembly and production drawings

Mechanical engineering: Unit 11


Automotive engineering
  • Introduction, power plant, fuel system, electrical system and other electrical fittings, lubricating system and cooling systems, chassis and transmission, axles, clutches, propeller shafts and differential
  • Condition for correct steering, steering gear mechanisms, automotive air conditioning, tyres, effect of working parameters on knocking, reduction of knocking, forms of combustion chamber for SI and CI engines rating of fuels, additives, emission

Mechanical engineering: Unit 12


Power plant engineering
  • Steam power plant, steam boilers, steam condensers, cooling towers, cogeneration and combined cycles, nuclear power plants, hydroelectric power plants, power plant economics

Mechanical engineering: Unit 13


Industrial engineering
  • System design: Factory location-simple OR models, plant layout-methods based, applications of engineering economic analysis and break- even analysis for product selection, process selection and capacity planning, predetermined time standards
  • System planning, forecasting methods based on regression and decomposition, design and balancing of multi model and stochastic assembly lines, inventory management-probabilistic inventory models for order time and order quantity determination
  • JIT systems, strategic sourcing, managing inter plant logistics

Mechanical engineering: Unit 14


Flight mechanics
  • Atmosphere: Properties, standard atmosphere
  • Classification of aircraft
  • Airplane (fixed wing aircraft) configuration and various parts
  • Airplane performance: Pressure altitude, equivalent, calibrated, indicated air speeds, primary flight instruments: Altimeter, ASI, VSI, turn-bank indicator
  • Drag polar, takeoff and landing, steady climb and descent, absolute and service ceiling, cruise, cruise climb, endurance or loiter, load factor, turning flight, V-n diagram, winds: Head, tail, and cross winds
  • Static stability: Angle of attack, sideslip, roll, pitch and yaw controls, longitudinal stick fixed and free stability, horizontal tail position and size, directional stability

Mechanical engineering: Unit 15


Aircraft structures
  • Stress and strain: Equations of equilibrium, constitutive law, strain-displacement relationship, compatibility equations, plane stress and strain, Airy’s stress function
  • Flight vehicle structures: Characteristics of aircraft structures and materials, torsion, bending, and flexural shear
  • Flexural shear flow in thinwalled sections
  • Buckling
  • Failure theories
  • Loads on aircraft
  • Structural dynamics: Free and forced vibration of discrete systems
  • Damping and resonance
  • Dynamics of continuous systems

Mechanical engineering: Unit 16


Aerodynamics
  • Basic fluid mechanics: Incompressible irrotational flow, Helmholtz and Kelvin theorem, singularities and superposition, viscous flows, boundary layer on a flat plate
  • Airfoils and wings: Classification of airfoils, aerodynamic characteristics, high lift devices, Kutta Joukowski theorem, lift generation, thin airfoil theory, wing theory, induced drag, qualitative treatment of low aspect ratio wings
  • Viscous flows: Flow separation, introduction to turbulence, transition, structure of a turbulent boundary layer
  • Compressible flows: Dynamics and thermodynamics of I-D flow, isentropic flow, normal shock, oblique shock
AFCAT AFCAT Syllabus

English: Unit 01


Comprehension

    English: Unit 02


    Error detection

      English: Unit 04


      Synonyms

        English: Unit 06


        Idioms and phrases

          General awareness: Unit 01


          History

            General awareness: Unit 02


            Geography

              General awareness: Unit 03


              Civics

                General awareness: Unit 04


                Politics

                  General awareness: Unit 05


                  Current affairs

                    General awareness: Unit 06


                    Environment

                      General awareness: Unit 07


                      Basic science

                        General awareness: Unit 08


                        Defence

                          General awareness: Unit 09


                          Art

                            General awareness: Unit 10


                            Culture

                              General awareness: Unit 11


                              Sports

                                Numerical ability: Unit 01


                                Decimal fraction

                                  Numerical ability: Unit 02


                                  Time and work

                                    Numerical ability: Unit 03


                                    Average

                                      Numerical ability: Unit 04


                                      Profit and loss

                                        Numerical ability: Unit 05


                                        Percentage

                                          Reasoning and military aptitude test: Unit 01


                                          Verbal skills and spatial ability

                                            IAF releases the AFCAT mock tests on its official website. Candidates who are planning to appear and qualify in the AFCAT exam must refer to the IAF mock tests and practice them while preparing to score well in the exam. 

                                            The mock tests of AFCAT exam 2025 will help aspirants understand the syllabus and exam pattern. Regular practising will help aspirants increase their speed, accuracy, and effectiveness, time management skills and confidence. It will also help candidates make less errors in the exam.

                                            The AFCAT exam which is conducted by IAF is one of the toughest exams in India. To work for the Indian Air Force at the highest position, a candidate has to go through both physically as well as mentally challenging exams throughout the recruitment process. A special exam like AFCAT requires special preparations, few of which we have mentioned below.

                                            • Understand the AFCAT 2025 exam pattern and marking scheme before starting with the exam preparation. Candidates should also know all the subjects and topics involved in the exam syllabus to get around the idea of what will be the nature of the AFCAT 2025 question paper.

                                            • Take a look at all the mocks and previous year AFCAT Cut Offs this will give candidates an understanding as to what is a secure score to obtain in order to qualify and make way to the recruitment process.

                                            • Read the complete syllabus

                                            • Prepare General Awareness and refer to NCERT History and Geography books from class 6th to 12th

                                            • Read Indian Express daily/Hindu

                                            • Prepare English

                                            • Solve previous 10-year question papers. It will help increase your accuracy

                                            • Analyse yourself and do proper time management

                                            • Strategise a proper study plan to prepare for not just AFCAT but any other government exam. 

                                            AFCAT 2025 Payscale 

                                            IAF is one of the most challenging jobs but the authorities take great care of the recruits which also makes IAF one of the most well-paid jobs in the world. After qualifying the AFCAT, an officer can earn a salary of Rs. 56,100-1,10,700. Apart from the salary, IAF also provides the officers with In the below table we have shared the post-branch-wise payscale of AFCAT.

                                            AFCAT Exam 2025 - Branch-wise Payscale

                                            Flying Branch Salary

                                            Rs. 85,372/-

                                            Ground Duty (Tech) Branch Salary

                                            Rs. 74,872/-

                                            Ground Duty (Non-tech) Branch Salary

                                            Rs. 71,872/-

                                            AFCAT Exam - Benefits

                                            After joining the Indian Air Force you enjoy the luxury of working for one of the best defence organisations in the world. This job comes with challenges, a handsome paycheque and more than that endless benefits and facilities for you and your family. Few of the benefits are mentioned in the table below:

                                            AFCAT Exam 2025 - Various Benefits

                                            Insurance

                                            Air Force Personnel - Rs. 75 lacs

                                            Air Force Personnel (Pilots) - 85 lacs

                                            Loan facility

                                            House Building Loan

                                            Computer Loan

                                            Conveyance Loan

                                            Medical

                                            All Air Force Officers, their families and dependants get free access to medical rooms and hospitals equipped with the best facilities.

                                            Scholarships and Welfare

                                            Grants from the AFWWA (Air Force Wives Welfare Association)

                                            Other benefits

                                            • Accommodation

                                            • Leave- Annual leave for 60 days and casual leave of 20 days per year

                                            • Leave travel concessions

                                            • Institute and Messes membership

                                            • School facilities

                                            • Rail concessions

                                            • Secured camp life

                                            • CSD facilities

                                            • Recreational and sports facilities

                                            Educational Opportunities

                                            • M.Tech for officers of Technical Branches in IIT & BHU-IT

                                            • Study leave of up to 24 months

                                            • Tie-ups with IGNOU

                                            Post-retirement Benefits

                                            • Pension

                                            • Insurance

                                            • Medical (Lifetime access)

                                            Placement cell

                                            Helping retired officers get a civil job matching their profile

                                            Contact information

                                            DISHA CELL, IAF

                                            Contact Disha Cell of IAF on the below address for queries  related to the eligibility, advertisement/notification, submission of the documents after recommendation/medical, merit list and joining instructions

                                            Address - Air Headquarters (Vayu Bhawan), Motilal Nehru Marg, New Delhi – 110106

                                            Toll-Free no. 1800-11-2448,

                                            Tele: 011 – 23013690 (Direct), 23010231 Extn 7610, 7645, 7646.

                                            Fax – 011 – 23017918

                                            E-Mail: [email protected]

                                            Tele Timings: 9 am - 1 pm & 2 pm - 5 pm ( Monday to Friday, except holidays)

                                            AFCAT CELL, IAF

                                            Contact the AFCAT cell of IAF for queries related to the scheme & syllabus of AFCAT)

                                            Address - Director of Education, West Block - VI, Air HQs(RKP), RK Puram, New Delhi – 110066

                                            Tele: 011 – 23010231 Extn:2112- 6245, 6246

                                            E-Mail: [email protected]

                                            Tele Timings: 9 am - 1 pm & 2 pm - 5 pm ( Monday to Friday, except holidays)

                                            AFCAT CELL, C-DAC

                                            Candidates can contact the AFCAT Cell of the Indian Air Force for queries pertaining to the registration/application process, payment related issues, admit card and AFCAT exam as well as counselling centres.

                                            Tele: 020 – 25503105, 06

                                            Toll-Free no. 1800-11-2448

                                            E-Mail: [email protected]

                                            Tele Timings: 9 am - 1 pm & 2 pm - 5 pm ( Monday to Friday, except holidays)

                                            The AFCAT 1 2025 admit card will be released on February 7, 2025 in online mode at afcat.cdac.in. Candidates who successfully applied for the AFCAT exam can download their AFCAT 1 2025 admit card by logging in to the website using their email ID and password. Candidates have also received the admit cards in their registered emails.

                                            How to Download AFCAT 1 2025 Admit Card?

                                            • Visit the official website - afcat.cdac.in

                                            • Go to the Candidate login

                                            • Enter your email ID and password

                                            • Click on the AFCAT 2025 admit card link

                                            • You admit will appear on the screen

                                            • Download the admit card

                                            • After downloading, check all the details carefully

                                            • If there are any discrepancies in the admit card, contact IAF as soon as possible

                                            *IAF will also send the admit card on the registered email of candidates.

                                            Candidates will have to carry the following things to the AFCAT 2025 exam hall

                                            • Admit Card for AFCAT 2025

                                            • Aadhaar Card

                                            • 1 valid photo identity card such PAN card, Passport, Driving license, Voter identity card and College identity card or any other valid photo identity proof, with details of name, father’s name, date of birth and a clear photograph

                                            • Two passport size colour photographs - same as the photo uploaded in the application form of AFCAT 2025

                                            • Candidates should also keep a Ballpoint Pen (Blue or Black) for formalities during the checking, signing attendance and for rough work if any.

                                            The answer key of AFCAT will not be released by the IAF. However, students will be able to get the AFCAT answer key 2025 provided by some top institutes. With the help of AFCAT answer key, candidates can predict their scores by using the marking scheme. For each correct answer, 3 marks will be given and 1 mark is deducted as an AFCAT negative mark for each wrong response. No points will be deducted for questions that are not attempted.

                                            Candidates who will appear in the AFCAT 1 2025 exam can check the exam analysis. The AFCAT 2025 exam analysis will help the students to know if there is a change in exam pattern, the difficulty level of question paper and all other details. The exam analysis of AFCAT exam is updated as per the feedback given by candidates.

                                            AFCAT Exam Analysis 2025

                                            With the help of AFCAT exam analysis 2025, candidates will get to know about the difficulty level of the question paper and the number of good attempts. Candidates will be able to check the exam analysis of AFCAT 2025 shift-wise on the end of AFCAT exam day.

                                            IAF decides a minimum qualifying mark for the exam that candidates need to score in order to be recruited for IAF. The minimum marks are known as cut off. IAF will release the AFCAT 2025 cut off on the official website. The cut off is also mentioned in the scorecard of candidates. 

                                            AFCAT cut off has been decided by IAF on the basis of factors like difficulty level of exam, number of vacancies and the number of applicants etc. On the basis of AFCAT cut off, candidates will be selected for the next round of selection process. 

                                            Previous year cut off marks of AFCAT exam

                                            Exam and Year

                                            AFCAT cut off

                                            EKT cut off

                                            AFCAT (1) 2019

                                            133

                                            50

                                            AFCAT (2) 2018

                                            140

                                            55

                                            AFCAT (1) 2018

                                            155

                                            60

                                            AFCAT (2) 2017

                                            160

                                            60

                                            AFCAT (1) 2017

                                            150

                                            60

                                            AFCAT (2) 2016

                                            148

                                            60

                                            AFCAT (1) 2016

                                            132

                                            52

                                            AFCAT (2) 2015

                                            144

                                            52

                                            AFCAT (1) 2015

                                            126

                                            55

                                            AFCAT (2) 2014

                                            123

                                            45

                                            Documents Required at AFCAT 2025 counselling

                                            Air Force Common Admission Test 2025

                                            • Class 10 certificate
                                            • Class 12 marksheet
                                            • Certificate of graduation/ post graduation degree
                                            • NOC (No Objection Certificate) from employer if candidate is Government employee
                                            • Commercial Pilots License issued by DGCA (if applicable)
                                            • NCC certificate (if applicable)

                                            A candidate needs to go through the following stages to get recruited in the Indian Air Force:

                                            Online Test: All the candidates who have successfully appy for AFCAT 1 2025 will have to first appear for the online test. The question paper of 2025 AFCAT online test will carry questions from General Awareness, Verbal Ability in English, Numerical Ability and Reasoning and Military Aptitude Test. The EKT question paper carries questions from subjects -Mechanical, Computer Science and Electrical & Electronics. Maximum marks allotted to AFCAT are 300. The test paper of EKT carries a total of 150 marks.

                                            AFSB Interview: After successfully qualifying the online test, candidates will be called by IAF to appear for the AFSB Interview. The AFSB interview will comprise of the following three stages:

                                            Stage I: The Officer Intelligence Rating Test along with the Picture Perception and Discussion Test (PP&DT) will be conducted on the first day of AFSB.

                                            Stage II: Psychological test will be conducted on Day 1 (Afternoon) and the Group Tests and Interview will be conducted for the next five days after the document verification (DV).

                                            For Flying Branch: Candidates applying for the Flying Branch will be required to appear in the Computerised Pilot Selection System (CPSS).

                                            AFCAT 2025 Counselling centres

                                            Candidates qualifying the online test of AFCAT 2025, will be called for the SSB interview. The SSB interview involves the following 4 stages"

                                            Stage 1: Officer Intelligence Rating Test – Picture perception and discussion test. In case the candidate fails to clear this, they will be disqualified on the same day.

                                            Stage 2: Stage 2 will be conducted for the next 3-4 days and will consist of the following stages.

                                            •          Psychology Test (Written)

                                            •          Group Test (Activities)

                                            •          Personal Interview

                                            •          Computerized Pilot Selection System Test CPSS (In case of Flying Branch)

                                            Stage 3: Medical Examination – Candidates qualifying all the above stages will have to appear in the medical round. The medical round will either be conducted at the Air Force Central Medical Establishment, New Delhi or at the Institute of Aviation Medicine, Bengaluru.

                                            State 4: All India Merit List - The Air Force Selection Board will prepare an All India Merit List of candidates on the basis of the qualified candidate’s performance in the tests and all the stages of the AFSB.

                                            Candidates whose name is mentioned in the merit list will receive call letters and joining instructions from IAF on the basis of the vacancies available in various branches.

                                            AFCAT counselling will be conducted at the following centres:

                                            State

                                            City

                                            Uttarakhand    

                                            Dehradun

                                            Karnataka

                                            Mysuru

                                            Gujarat

                                            Gandhinagar

                                            Uttar Pradesh

                                            Varanasi

                                            Documents required during the AFCAT 2025 counselling

                                            • Class 10th certificate

                                            • Class 12th mark sheet

                                            • Certificate of graduation/ post-graduation degree

                                            • NOC (No Objection Certificate) from an employer if the candidate is Government employee

                                            • Commercial Pilots License issued by DGCA (if applicable)

                                            • NCC certificate (if applicable)

                                            General Information

                                            Contacts

                                            02025503105 , 02025503106

                                            Relevant Links

                                            Official Website Link Click Here + 1 more

                                            Frequently Asked Questions

                                            1. What is the difference between AFCAT 1 and AFCAT 2?

                                            AFCAT is used to select candidates twice a year, with AFCAT 1 held in February and AFCAT 2 held in August.

                                            2. Is there any physical test for AFCAT?

                                            Candidates for AFCAT must meet physical standards, including running 1.6 km in 10 minutes, doing 10 pushups, and 3 chin-ups.

                                            3. In which month is AFCAT 1 exam held?

                                            AFCAT 1 2025 exam will be held on February 22 and 23, 2025. 

                                            4. Is AFCAT conducted 2 times in a year?
                                            AFCAT is conducted twice a year in February and August

                                            5. Who is eligible for AFCAT 1?
                                            Candidates must have completed 12th standard with a minimum of 50% marks each in Physics and Mathematics to be eligible for AFCAT 1.

                                            6. What is the minimum acceptable height?

                                            For male candidates in Ground Duty (Technical/Non-Technical) branch, it is 157.5 cms. For women candidates, the minimum acceptable height is 152 cms. The minimum acceptable height for both men and women candidates in Flying Branch is 162.5 cms.

                                            7. Can I apply for AFCAT after class 12?

                                            To be eligible for AFCAT exam, candidates must hold a graduation degree.

                                            8. How the candidates are selected for training?

                                            The candidates recommended by AFSB and those who are also medically fit will be selected for training on the basis of the merit list and availability of vacancies.

                                            9. How the merit list of AFCAT is prepared?

                                            The AFCAT merit list test is prepared on the basis of the minimum qualifying marks secured by candidates.

                                            10. What is the salary of flying officer?

                                            The salary ranges from Rs 56,100 to 1,10700.

                                            11. How many times I can give AFCAT exam?

                                            There is no minimum attempts to apply for AFCAT, although their is a maximum age limit.

                                            12. Is there any reservation in AFCAT exam?

                                            No, there is no reservation in the AFCAT exam.

                                            13. What is a good score for AFCAT?

                                            Candidates are required to score 140 to 160 marks out of 300 to create their chances of qualification.

                                            14. Is AFCAT tough?

                                            It is not that tough to crack the AFCAT exam, the online test is easy if you have prepared well. However, the AFSB interview and medical round are tough.

                                            15. How can I apply for AFCAT exam 2025?

                                            Candidates who wish to appear for AFCAT exam can fill up the application form on the official website.

                                            16. How many times AFCAT is conducted in a year?

                                            IAF conducts the AFCAT exam twice a year.

                                            Questions related to AFCAT

                                            Have a question related to AFCAT ?

                                            Hello aspirant,

                                            The eligibility requirements for AFCAT included age, educational attainment, nationality, and health standards. Candidates must meet these requirements in order to apply for the exam; otherwise, their applications will be denied. The AFCAT eligibility criteria state that candidates must be between the ages of 20 and 24 and that graduation is the required educational background for this exam.

                                            As you will be 23 years old in 2027, you are eligible for this exam.

                                            Thank you

                                            A minimum of 50% marks each in Physics and Mathematics at the 10+2 level and a minimum of three years of graduation degree (or appearing for the final semester exam) with 60% marks from a recognized university.

                                            Since you have completed your B.Sc. with Botany, Zoology, and Environmental Science, and are confident of passing with over 60%, you meet the educational qualifications for the Flying Branch in AFCAT 1 2025.

                                            • Ground Duty (Technical): This requires a four-year engineering degree or an equivalent qualification with minimum marks as specified for each role. Your B.Sc. wouldn't qualify for this branch.

                                            • Ground Duty (Non-Technical): This has openings for graduates from any stream, including your B.Sc. However, there might be specific requirements for each post (e.g., minimum marks, specific degrees preferred).

                                              https://competition.careers360.com/exams/iaf-afcat

                                              I hope it helps!

                                            Hello,


                                            Yes, you are eligible to sit for the Combined Defence Services (CDS) and Air Force Common Admission Test (AFCAT) exams provided you meet certain criteria. For CDS, you need a degree from a recognized university for Indian Military Academy (IMA) and Officers' Training Academy (OTA), and for the Air Force Academy (AFA), you need a degree with Physics and Mathematics at the 10+2 level or a Bachelor of Engineering. The age limits for CDS are 19–24 years for IMA and INA, 19–24 years for AFA, and 19–25 years for OTA. For AFCAT, you need a graduation degree with at least 60% marks and Physics and Mathematics at the 10+2 level for the Flying Branch, or a B.E./B.Tech degree for Ground Duty (Technical), and a three-year graduation degree with 60% marks for Ground Duty (Non-Technical).


                                            The age limits for AFCAT are 20–24 years for the Flying Branch and 20–26 years for Ground Duty. Since you are pursuing a B.P.Ed and have completed 10+2 with science, you meet the basic educational qualifications, provided you also meet the age and other specific criteria.


                                            Hope this helps,


                                            Thank you

                                            Dear aspirant !

                                            Hope you are doing good !

                                            Candidates between 19 to 25 years of age are eligible to apply for CDS recruitment 2024. Before filling up the application form, aspirants must check UPSC CDS eligibility criteria carefully. CDS exam 2024 for both sessions will be conducted on April 21, 2024 and September 1, 2024.

                                            From now you will get 4-5 attempts of both so don't worry about attempt.give your best in preparation only .

                                            Hope it helps you !!

                                            Thanking you


                                            Dear aspirant !

                                            Hope you are doing well ! No don't take risk with e pan card it can cost you your paper . Better to go with original one

                                            Admit card . This crucial document contains essential information such as your name, roll number, exam date and time, and exam centre details. Download it from the official AFCAT website. - Valid Photo ID Proof: Carry a recognized photo ID like an Aadhaar card, PAN card, driver's license, or passport .

                                            Hope it helps you !

                                            Carry aadhar instead of pan

                                            View All
                                            Back to top