actually I had most of the "Made In abyss" Whistle model, you can check my profile on the Made In Abyss collection ,there should be WHite,black and some other whistle in the collection, not sure If I had miss out any other whistle, do let me know if there are any other whistle in the series ya:)

Hey mate, you do have all of the white whistle models. I meant the basic red, blue and moon whistle. There are sadly no functional models for those around.
Thank you, and Happy Holidays!

I really really appreciate it my friend, we creator had spend lot of time making some profit and living and these guys just took them just like that,I had already file a copyright claim on this on the site, hope they will take action on that account as soon as possible my friend:)

Hey My Friend,,I had file a copyrights report on the platform and the model had been taken down:) really appreciate again thank you for informing me on this :)

Nada amigo, lo que sea por la comunidad y la impresión 3d FDM😍

Hey Bro,usually I only included 2 type of color file , it's either VRML(also known as WRL file) and another types was the bambu printer 3mf multicolor file ,so in this case I had included the VRML, I just check the file there is a zip file in the folder which contain the VRML also as know as WRL file(depending on which software you read them)it's a color 3d file that contain color information in mesh on the surface vertices of the VRML/WRL model , these format are utilize by some 3d printing vendor like "Shapeways" to do full 3d color print,hope this explain, Ok for the split stl version I think I miss that out, I had just upload the split model version to the same folder you can now redownload the file via the same link:)let me know if any inquiries ya:)

thank you for the response and the help. i will take a look and see if i can get the color file to work in Bambu Studio.

Hey Friend, Yeah, I think I might have miss out the fin,haha ok let me get the model update:)

Hey bro, yes ,you are right after doing some homework there are really fin structure at the tail area, anyways I had update the model, you can have a look at the preview image which already been updated:)

Hey Bro, wait let me do some home work on Golf 7,haha as I am not very familiar with this car model :)

Hey Bro, thanks for letting me know about this, Yes It's one of the earlier release so I think the techniques are not very good during that time,I only focus on getting the aesthetic but not the cease and details, sure, let me rework on this model and improve it for you , will send you notification once done ya:)kindly give me a nudge if I still not yet update next week just incase :)

Ok, thank you!

Hey Bro, the file had already uploaded ,you can now redownload it on the same folder you've purchases ya:)

Thank you for the high quality work!

Hey Bro, Hmm, thats strange ,can you paste the link here for the model you mentioned, no worries let me check if anything missing I will update for you :)

Hey My Friend, Ok I examine so it's the Ruffrunner" core was missing ,I had reupload the core file for Ruffrunner in to the same folder you've purchased, you can now redownload them again, thank you for informing on this,and kindly let me know if you encounter any missing file or error on my file ya:)

Hey Thank you so much!!! I got it now.

hey bro, yes, there should be in there, no worries, let me check, if missing I will update the file and once you received the cult notification you should be able to redownload it :)

Hey Bro, my bad for missing out the most important thing.."The Egg" haha, ok apologies, I had add the file in to the folder and you should be able to redownload the file once you receive cult 3d notification,thank you for supporting my model ya:)

yes, its actually produce more like a high pitch sound , I still dont know how to produce the lower tone haha.

Hey bro,actually you can print this sitting flat on the print bad and print "support only support from the bed" so no support structure will form inside the whistle,most of the print slicer will have this function where you can apply support only direct from the bed and no support on the print itself,you just need some place the flat area of the whistle stand on the print bed and give some organic support for the overhang area and that should do it, so do you want the intertal ball to be remove? sure ,I will upload a version where the internal ball remove,you can redownload it once you received the cult 3d mortification :)

Hey man, ok the file had been uploaded to the same folder you purchase, please redownload it ya .I avoid send file directly via email .

hi...ok i'll try on "Touching Buildplate" for placement support... and model with ball i préfer

hi again no way to unplug ball inside...so i print the "NO ball" version... but 'll be obliged to drill a hole to insert ball ... better in two parts ... insert ball and glue both parts... or maybe you can send me step version ?

Hey Bro, no worries, wait, Let me rework on the ball version so that you can unplug it easier, will update once ready later tonight /tomorrow:)

Hey Bro, I had redesign the whistle so that the ball will be reposition near the whistle opening so that it can print without any support and can be push in to remove it once done print,,please redownload it and try it out:)

Hey bro,
thanks for liking and purchasing the model! Regarding your question, I’d like to clarify that none of my files include textures. However, the file does contain a VRML color file, which embeds color information directly into the 3D model’s vertices. If you’re using software like ZBrush or an industrial color printer, you should be able to extract that color information and print the model in color, just like in the preview image I shared.

In addition, some of my models also include 3MF files. These are compatible with the Bambu Studio slicer for color 3D printing using the AMS unit. To achieve accurate results, you’ll need to match your filament colors with those specified in the slicer.

I’ve also heard from some buyers that they were able to extract vertex color information using their 3D software, though that’s outside of my expertise—haha!

To sum up, while my models don’t include textures like typical 3D animation files, they do come with color information, provided you have the right tools and software for 3D printing. I hope this clears up your question! I’ll double-check which files are included with this model once I’m back at my desk. :)

All my models are in STL format, which is specifically designed for 3D printing. Adding color textures would require me to retopologize the model, UV unwrap it, and optimize it for texturing. These additional steps would significantly increase both the time and cost of creating the model, which is not aligned with my intended purpose.

Hi!
Thank you for the detailed explanation!
I'm using 3ds Max and Maya. If you could provide the file in FBX or USD format, I could utilize the textures.
I can retopologize it, bake the texture, and send you the file back!

Could you share the VRML file instead?

Hey Bro,Ok I just check the file ,it was release a while back which that time I did not included the color file so you notice I didn't mentioned it in my preview render(VRML included), but since you had requested, I can include the VRML for you ,but you need to wait while I will dig the old file out and export the VRML for you(just for this file ya),kindly give me a nudge here if I did haven't update ya :)

Hi, thank you so much! I will download it now!

Hey friend, actually I use combination of software, 3d Max,Maya and zbrush,and blender for making my models, for hard surface I will lean more to maya and 3d max as this is what I use before I use zbrush and other software,for organic studd then I will use zbrush and blender,yes, I also use Blender to work on some of project as mainly I want to know how far it can go, but mainly for testing purpose so can't say much on that,emm so far I tried some AI site online but the model they produce still very preliminary and not suitable to concert to print stl so I don't think I have any good recommendation on that, hope you answered you my friend :)

Unfortunately, I don’t offer individual discounts for purchasing just a few models. If you’re considering buying 15–30 models, I might be able to work something out, but even in that case, I would still recommend purchasing directly through my page. Selling models offline makes it harder for you to get updates when I release new versions.
Additionally, compiling and sending files manually takes time away from creating more exciting models. This is why I usually recommend subscribing to my Patreon paid membership instead.
With a Patreon subscription, you get the best value: 30 free models right after signing up, plus 20+ new models every month if you continue your membership. That’s over 50 models upfront (this month’s free collection alone includes 23 pieces)!
I hope this clears things up. Feel free to reach out if you have any questions! :)

Hey Bro, let me look in to this and consider if I should do that, I can't recall the model design since it was release a while back , will check on it and see if this feasible.

Hey bro, if you mentioned you already subscribed to my Patreon, I'm okay with you selling a few of the models you print and make for your buyers. Just keep in mind that these are still fanart pieces and not official merchandise for mass production. As long as we're clear on that, I'm cool with it!

Thank you!!!

Hey bro ,sorry I missout your email ,been busy lately making requested model so miss out lot of messages and email,let me chdkc and get to you:)

No problem! If it makes it easier, I'll resend the email. This way, the message or possible references are not lost.

Hey friend ,Hmm I'm not sure I get your question ,so you have a particular model that u want to make in to resin print?.

Hey bro,
Lately, I’ve been focusing on fulfilling Patreon requests for models. However, since you’re asking about a type of model I’m genuinely interested in creating—and because I really want your nephew to have a happy Christmas—here you go!
I don’t think my models are superior to others, but I put a lot of time and effort into each one. If you appreciate my work, you can support me by signing up for a one-month Patreon membership for $18 USD (https://www.patreon.com/c/adamchai). This gives you access to 50+ models. :)
Hope this brings joy to your nephew!

https://cults3d.com/en/3d-model/art/the-niffler-3mf-bambu-ams-color-file-is-included-harry-potter-classic-monst

Hey Adam!
Awesome! 👏🏻👏🏻👏🏻 thank you so much, I didn't expect such a quick fix 😄, I'm sure he will love it and I'll be able to rest in peace once and for all.
Thanks so much for letting me know about your Patreon, I'm going to take a look, it sure is convenient for me.
Happy Holidays!

hey bro, which verison you had bought? the ley down version or the standing pose?

Hey Bro, let me check on this, if the file having error I will reupload for you, can you paste the model link here :)

Sure, here you are:
https://cults3d.com/es/modelo-3d/arte/smurfette-classic-cartoons-fanart
https://cults3d.com/es/modelo-3d/arte/papa-smurf-classic-cartoons-fanart

After some more tries, it was able to segmentate it despite showing the error message. I'm starting the printing right now, I'll tell you in circa 5 hours how it went.

Hey bro, that's Non- Manifold model error which sometime will appear on some slicer but some slicer will work without issues, you can easily fix it with some free slicer like "bambu Studio" when you saw the red highlight at the right corner to fix it ,but will takes about few minute thought:), anyways I will reupdate my file again to avoid this issues, but you can use download the slicer to fix all these issues with the slicer I mentioned:)

https://bambulab.com/en/download/studio

select the file with red highlights anc click "repair" then should be alright, apologies for these inconvenient, as I make most of my model with certain software and this will sometime occur but from my side the slicer don't show any issues so I sometime did not realize the error :)

Hey Bro,I think the file might have been offline for unknow reason, but anyways no worries, kindly send me email to me directly"adamchai2005@gmail.com" so I can resend you the file :)

sure my friend, let me know which model you would like to split :). if it's not to complicated one and not taking too much of my time from making new model then I will just update it for you,otherwise if too much work then I will let you know:)

Its not nessacartly one of yours hope that is ok? Although I do love ur already have 3 planned from the monster hunter stls