About: Punch in/out

An Entity of Type: topical concept, from Named Graph: http://dbpedia.org, within Data Space: dbpedia.org

Punch in/out is an audio and video term that originated as a recording technique used on early multitrack recordings whereby a portion of the performance was recorded onto a previously recorded tape, usually overwriting any sound that had previously been on the track used. The erasing and/or recording heads had to be very carefully aligned and applied to the tape surface with delicate timing and precision to avoid ruining the recording, and the practice was feared by most producers and engineers.

Property Value
dbo:abstract
  • Punch in/out is an audio and video term that originated as a recording technique used on early multitrack recordings whereby a portion of the performance was recorded onto a previously recorded tape, usually overwriting any sound that had previously been on the track used. The erasing and/or recording heads had to be very carefully aligned and applied to the tape surface with delicate timing and precision to avoid ruining the recording, and the practice was feared by most producers and engineers. After the advent of 16- and 24-track equipment it was no longer necessary to risk the recording as a whole, as an empty portion of another track could be dedicated to such use. Vocalists in particular would usually record several renditions over separate parallel tracks, with the producers choosing the best bits from the layered vocals to mix together. The term "punching in" remained in use despite this fact. (en)
dbo:wikiPageID
  • 8177262 (xsd:integer)
dbo:wikiPageLength
  • 2225 (xsd:nonNegativeInteger)
dbo:wikiPageRevisionID
  • 1102335333 (xsd:integer)
dbo:wikiPageWikiLink
dbp:wikiPageUsesTemplate
dcterms:subject
gold:hypernym
rdf:type
rdfs:comment
  • Punch in/out is an audio and video term that originated as a recording technique used on early multitrack recordings whereby a portion of the performance was recorded onto a previously recorded tape, usually overwriting any sound that had previously been on the track used. The erasing and/or recording heads had to be very carefully aligned and applied to the tape surface with delicate timing and precision to avoid ruining the recording, and the practice was feared by most producers and engineers. (en)
rdfs:label
  • Punch in/out (en)
owl:sameAs
prov:wasDerivedFrom
foaf:isPrimaryTopicOf
is dbo:wikiPageRedirects of
is dbo:wikiPageWikiLink of
is foaf:primaryTopic of
Powered by OpenLink Virtuoso    This material is Open Knowledge     W3C Semantic Web Technology     This material is Open Knowledge    Valid XHTML + RDFa
This content was extracted from Wikipedia and is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License