Preprint

Article

Specification and Classification of Pelletised Dried Sewage Sludge: Identifying its Key Properties as a Renewable Material for Enabling Environmentally Non-harmful Energy Utilisation

Altmetrics

Downloads

286

Views

Comments

A peer-reviewed article of this preprint also exists.

Supplementary Material

supplementary.docx (1.76MB )

Vesna Mislej^*,Barbara Novosel

This version is not peer-reviewed

This preprints belongs to the Topic

Sustainable Environmental Technologies

Submitted:

28 October 2022

Posted:

31 October 2022

You are already at the latest version

Alerts

Abstract

Renewable active sludge is a smart material for wastewater treatment and the protection of surface water bodies. The generated pellets (dried and pelletised dehydrated anaerobically stabilised excess sludge) are produced in a quantity of 31.4 g ± 5.6 g dry matter (DM) per one Population equivalent (PE) calculated to COD (PE_COD) in one day. As pellets are combustible material, their energy utilisation must reach sustainable development goals (SDGs) - a bridge must be created between »treated sewage sludge as the tool to remove pollutants and nutrients from wastewater« and »preparation of the valuable material as a solid recovered fuel (SRF) that meets customer-specific requirements«. Technical Report CEN/TR 15508 and Technical Standard EN ISO 21640 set up methods for specifying and classifying pellets as an SRF. In the last eleven years (2010 – 2021), pellets' net calorific value (NCV) is 13.0 ± 0.7 MJ kg^-1 as received (ar). In 2021, the 80^th percentile of the Hg/NCV ratio was 0.079 mg Hg MJ^-1. In 2010 – 2021, the annual amount of Hg transferred to stakeholders reduced by 64.3 % m/m - from 10.1 kg to 3.67 kg. The halogen contents of the pellets do not threaten corrosion to the incineration facility. Stable pellets' energy potential and perspective ash composition for critical raw materials recovery qualify pellets as a specific waste stream and a renewable material for SRF production.

Keywords:

Subject: Engineering - Energy and Fuel Technology

Copyright: This open access article is published under a Creative Commons CC BY 4.0 license, which permit the free download, distribution, and reuse, provided that the author and preprint are cited in any reuse.