Authors
Tetsuro Katayama1, *, Tatsumi Nishida1, Yoshihiro Kita2, Hisaaki Yamaba1,
Kentaro Aburada1, Naonobu Okazaki1
1
Department of Computer Science and Systems Engineering, Faculty of Engineering,
University of Miyazaki, Miyazaki, Miyazaki 889-2192, Japan
2
School of Computer Science, Tokyo University of Technology, Hachioji, Tokyo
192-0982, Japan
*
Corresponding author. Email: [email protected]
Corresponding Author
Tetsuro Katayama
Received 15 October 2018, Accepted 22 November 2018, Available Online 30
March 2019.
DOI
https://doi.org/10.2991/jrnal.k.190220.009
Keywords
Embedded technologies; Arduino; simulator; iPad
Abstract
Embedded technologies are used everywhere. One of the educational materials
to learn the embedded technologies is Arduino. When a beginner designs
circuit, it is possible to design the circuit that damages Arduino itself
or the modules on it. Therefore, this research implements an Arduino simulator
that runs on iPad for supporting to design a circuit. In this simulator,
the circuit on iPad is analyzed to detect the value of voltage on the circuit
and the risk that Arduino itself or the modules are damaged.
Copyright
© 2019 The Authors. Published by ALife Robotics Corp. Ltd.
Open Access
This is an open access article distributed under the CC BY-NC 4.0 license
(http://creativecommons.org/licenses/by-nc/4.0/).