1. Introduction
Several famous inequalities for real functions have been proposed in the literature. One of them is the Redheffer inequality, which states that
Inequality (
1) was proposed by Redheffer [
1] and proved by Williams [
2]. This work motivated many researchers, regarding its generalization, refinement, and applications. A new (but relatively difficult) proof of (
1) using the Lagrange mean value theorem in combination with induction was given in [
3]. In 2015, Sándor and Bhayo [
4] offered two new interesting proofs and established two converse inequalities. They also pointed out a hyperbolic analog. Other notable works related to the Redheffer inequality include [
5,
6,
7,
8,
9,
10]. Motivated by the inequality (
1), C.P. Chen, J.W. Zhao, and F. Qi [
8], using mathematical induction and infinite product representations of
,
and
respectively, established the following Redheffer-type inequalities:
A hyperbolic analog of inequality (
1) has also been established [
8], by proving that
In [
6], inequalities (
1) and (
4) were extended and sharpened, and a Redheffer-type inequality for
was also established, as follows:
- (i)
Let
. Then,
hold if and only if
and
.
- (ii)
Let
. Then,
hold if and only if
and
.
- (iii)
Let
. Then,
hold if and only if
and
.
- (iv)
Let
. Then,
hold if and only if
and
.
- (v)
Let
. Then,
hold if and only if
and
.
- (vi)
Let
. Then,
hold if and only if
and
.
The Bessel function
of order
is the solution of the differential equation:
The function
is known as the modified Bessel function. It is well known that trigonometric functions are connected with Bessel and modified Bessel functions, as follows
Based on the relationship between trigonometric and Bessel functions as stated above, and as Bessel and modified Bessel functions have infinite product representations involving their zeros, the Redheffer inequality (
1) has been generalized for modified Bessel functions in [
7], and sharpened in [
9]. There are several other special functions, such as Struve and
q-Bessel functions, which have infinite product representations and are also related to trigonometric functions.
Motivated by the above facts, the aim of this study was to address the following problem:
Problem 1. Construct the class of functions f that can be represented by an infinite product with the factors involving the zeroes of f, such that f exhibits a Redheffer-type inequality.
To answer Problem 1, we consider a sequence
, such that
for
and the infinite product
is also absolutely convergent to a function of
x for
.
We study several properties of functions that are members of the following two classes:
It is easy to check that, for a fixed
,
is a set of zeroes of the functions in the class
. Unless mentioned otherwise, throughout the article, we denote by
the
positive zero of the functions in the class
. For
and
, it immediately follows that
, where
.
Using a similar concept as in [
7,
9], we derived the Redheffer inequality for the functions from both classes,
and
. We also investigate the increasing/decreasing, log convexity, and convexity nature of the functions (or their products) from the above two classes. The main results are discussed in
Section 2, while
Section 3 provides several examples based on the main result in
Section 2. In
Section 4, we compare the obtained result with known results; especially the results given in [
7,
9,
10,
11].
The following lemma is required in the following.
Lemma 1 ([
12])
. Suppose and , where and for all k. Furthermore, suppose that both series converge on . If the sequence is increasing (or decreasing), then the function is also increasing (or decreasing) on . Lemma 2 (Lemma 2.2 in [
13])
. Suppose that and are differentiable functions, such that for . If is increasing (or decreasing) on , then so is . 3. Application Examples
As stated before, the primary aim of this work is to find a Redheffer-type inequality for functions that are combinations of well-known functions. By constructing examples, we show that Theorem 1 not only covers known results but also covers a wide range of functions. We list each case as an example.
3.1. Example Involving Trigonometric Functions
Our very first example involves the well-known function
. In mathematics, physics, and engineering, there are two forms of the
function; namely, non-normalized and normalized sinc functions. In mathematics, the non-normalized
function is defined, for
, as:
On the other hand, in digital and communication systems, the normalized form is defined as:
The scaling of the independent variable (the x-axis) by a factor of is the only distinction between the two definitions. In both scenarios, it is assumed that the limit value 1 corresponds to the function’s value at the removable singularity at zero. The function is an entire function, as it is analytic everywhere.
The normalized
has the following infinite product representation:
It is well known that the infinite series
is convergent and
We can conclude that
. From Theorem 1, it follows that
with
,
, and
Now, replacing
x with
in (
27), we have
Clearly,
. Hence, by Theorem 1 (part 3), it follows that
for
. Here,
and
are the best possible values of the constants.
On the other hand, from Theorem 2, it follows that
for
, where
is the best possible constant.
Next, we consider the infinite product
Using the Mathematica software, we find that
and
Clearly, , and we have the following result, according to Theorem 1.
Corollary 1. Let . Then, the following inequalityholds for . Here, and are the best possible constants. 3.2. Examples Involving Hurwitz Zeta Functions
The Hurwitz zeta functions are zeta functions defined for the complex variable
s, with
and
, defined by
This series is absolutely convergent for given values of
s and
, and can be extended to meromorphic functions defined for all
. In particular, the Riemann zeta function is given by
. For our study in this section, we consider
and
.
Now, consider the infinite product
for which the product is convergent. In the closed form of the product, we consider
. Then,
have the forms
Next, we state a result related to the inequalities involving
. Although the result is a direct consequence of Theorem 1 (Part 6), taking
for
and
, we state it as a theorem due to its independent interest. Clearly,
Theorem 3. If , and , then the following sharp exponential inequality holds:with the best possible constants as and . Taking
in (
34), it follows that
Now, by choosing
in (
35), we have the following special cases of Theorem 3:
where, in each of the cases (
), the best values of
and
are listed below
3.3. Examples Involving Bessel Functions
In this part, we discuss the generalization of the Redheffer type bound in terms of Bessel and modified Bessel functions. In this regard, we consider the very first result given by Baricz [
7], and later by Khalid [
9], as well as Baricz and Wu [
10].
From ([
14], p. 498), it is known that the Bessel function
has the infinite product
for arbitrary
x and
. It is also well known that ([
14], P. 502)
This implies
. Similarly,
—the normalized form of the modified Bessel function
—can be expressed as
which indicates that
. Now, from Theorem 1 (3) and Theorem 2, we have the following results.
Theorem 4. Consider and .
- 1.
For , we havewith the best possible constants as and . - 2.
For any and , we havewith the best possible constants as and .
Now, from Theorem 1 (6), the following inequality holds for normalized Bessel functions.
Theorem 5. Consider and . For , we havewith the best possible constants as and . 3.4. Examples Involving Struve Functions
One of the most well-known special functions is the solution to the non-homogeneous Bessel differential equation
called the Struve functions,
. If
denotes the
nth positive zero of
, then, for
, the function
can be expressed as (see [
15])
From [
16] (Theorem 1), it is useful to note that
for
. From (
41), consider the normalized form
From [
17], it follows that for
,
Consider the modified form of the Struve function
Clearly, and .
Now, from Theorem 1 (3) and Theorem 2, we have the following results.
Theorem 6. Consider and .
- 1.
For , we havewith the best possible constants as and . - 2.
For any and , we havewith the best possible constants as and .
Now, from Theorem 1 (6), the following inequality holds for normalized Bessel functions.
Theorem 7. Consider and . For , we havewith the best possible constants as and . 3.5. Examples Involving Dini Functions
The Dini function
is defined by
The modified Bessel functions are related to the Bessel functions by
, which gives the modified Dini function
defined by
For an integer
, the domain
can be taken as the whole complex plane, while
is the whole complex plane minus an infinite slit from the origin if
is not an integer.
In view of the Weierstrassian factorization of
where
and the formula
, we have the following Weierstrassian factorization of
for all
and
:
where the infinite product is uniformly convergent on each compact subset of the complex plane, where
is the
positive zero of the Dini function
. The principal branches of
and
correspond to the principal value of
, and are analytic in the
z-plane cut along the negative real axis from 0 to infinity; that is, the half line
. Now for
, define the function
as
Furthermore, for
, let us define the function
From [
18], it follows that
Comprehensive details of the properties of Dini functions can be found in [
11,
18] and the references therein.
From the definition of the classes and , it is clear that and . Thus, we have the following results, by Theorems 1 and 2.
Theorem 8. Consider and .
- 1.
For , we havewith the best possible constants as and . - 2.
For any and , we havewith the best possible constants as and .
Further, Theorem 1 (6) gives the following result.
Theorem 9. For and , we havewith the best possible constants as and . 3.6. Examples Involving q-Bessel Functions
This section considers the Jackson and Hahn–Exton
q-Bessel functions, respectively denoted by
and
. For
,
and
, both functions are defined by the series
Here,
are known as the
q-Pochhammer symbol. For a fixed
z and
, both of the above
q-Bessel functions relate to the classical Bessel function
as
and
. The
q-extension of Bessel functions has been studied by several authors, notably, references [
19,
20,
21,
22,
23,
24] and the various references therein. The geometric properties of
q-Bessel functions have been discussed in [
25]. It is worth noting that abundant results are available in the literature, regarding the
q-extension of Bessel functions; however, we limit ourselves to the requirements of this article. For this purpose, we recall the Hadamard factorization for the normalized
q-Bessel functions:
where
Lemma 3 ([
25])
. For , the functions and are entire functions of order zero, which have Hadamard factorization of the formwhere and are the nth positive zeros of the functions and , respectively. We recall that, from [
25], the
q-extension of the first Rayleigh sum for Bessel functions of the first kind is
The series form of
is
Comparing the coefficients of
in (
55) and (
57), it follows that
The above facts imply that
for
. For
and
, denote the
zero of
by
. From (
56) and (
58), it follows that
Now, we have the following result, by Theorem 1 (6).
Theorem 10. The function for satisfies the sharp Redheffer-type inequalityon . Here, and are the best possible constants. 4. Conclusions
In this article, we defined two classes of functions on the real domain, using the infinite products of factors involving the positive zeroes of the function. We assume that the infinite product is uniformly convergent, and it is also assumed that the sum of the square of zeroes is convergent. We illustrate several examples that ensure that these classes are non-empty. Functions starting from the most fundamental trigonometric functions (i.e., sin, cos) to special functions, such as Bessel and q-Bessel functions, Hurwitz functions, Dini functions, and their hyperbolic forms, are included in the classes. In conclusion, it follows that the results obtained in
Section 2 are similar to the results available in the literature for each of the individual functions listed above. For example, Redheffer-type inequalities for Bessel and modified functions, as stated in Theorem 5 and Theorem 4, form part of the results given previously in [
7,
9,
10], while the inequality obtained in Theorem 8 has also been obtained in ([
11], Theorem 7). From Theorem 1 (part 4), it follows that the function
is increasing on
and decreasing on
, which has also been obtained in ([
11], Theorem 8 (i)). To the best of our knowledge, Theorems 3 and 10 have not been published in the existing literature. We finally conclude that the Redheffer-type inequalities obtained in this study cover a wide range of functions, regarding Theorems 1 and 2. Using the Rayleigh concepts provided in [
26], more investigations into the zeroes of special functions may lead to more examples related to the work in this study, and we intend to follow this line of research for future investigations.