The Indian locomotive class WAP-1 is a class of 25 kV AC electric locomotives that was developed in 1980 by Chittaranjan Locomotive Works for Indian Railways. The model name stands for broad gauge (W), AC Current (A), Passenger traffic (P) locomotive, 1st generation (1). They entered service in late 1981. A total of 65 WAP-1 were built at CLW between 1980 and 1996, which made them the most numerous class of mainline electric passenger locomotive until its successor, the WAP-4.
WAP-1 | |||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
|
The WAP-1 is India's first dedicated electric passenger locomotive of Indian Railways, and has provided the basic design for a number of other locomotives like WAP-3 and WAP-4 models. However, with the advent of new 3-phase locomotives like WAP-5 and WAP-7, the WAP-1 locomotives were relegated to hauling smaller express and passenger trains and now the aging fleet the WAP-1 locomotives are being slowly withdrawn from mainline duties and scrapped.
As of March 2024, 55 locomotives still retain "operational status" on the mainline as WAP-1, with further examples having been converted to WAP-4.
Development
editBackground
editIn the early 1980s, Indian Railways began considering developing a passenger version of its WAM-4 class.[1][failed verification] Designed for both passenger and goods trains the WAM-4 was one of the most successful locomotives of the 1970s and a mainstay of the Indian Railways.
Five prototype locomotives of this type were ordered from CLW to the design of RDSO. The first prototype locomotive was put into service in 1981.[2] They were first used on the Howrah Rajdhani Express.[3]
The locomotive is powered by six axle-hungs, nose-suspended forced ventilated type DC traction motors. Speed control is achieved by grouping in 2S-3P combination and by field weakening of the motor. It utilises a silicon rectifier for conversion of AC power into DC.[i][4]
They are being converted to make them suitable for multiple operations. Compressed air brakes for the locomotives and vacuum brakes for the train are provided. The brake system is being modified to make them suitable for dual brakes.[citation needed]
The WAP-1 provided the basis for the WAP-4.
Variants
editThe WAP-3 was the upgraded variant of the WAP-1 with a higher top speed of 140 km/h. All units of this class were WAP-1 units already in service. The first locomotive converted was a WAP-1 22005 Jawahar. Subsequently 8 more WAP-1 were converted, but since the class were not a great success and had performance issues, these were converted back to WAP-1 in 1997.[5]
Presevation
editOne WAP-1 locomotive, 22004, has been preserved at Arakkonam shed.[5]
Image gallery
edit-
2925 Paschim Express with a WAP-1
-
WAP-1
-
AJJ WAP-1 with WAP-4 livery hauls Trivandrum-bound Guwahati Express
-
AJJ WAP-1 in full WAP-4 livery.
-
12497 (NDLS-ASR) Shaan-e-Punjab Express with a WAP-1
-
WAP-1 22076 Aastha of GZB with Agra-bound ICE at LJN
-
WAP-1 with Raj Livery at Delhi
Locomotive sheds
editZone | Name | Shed code | Quantity | |
---|---|---|---|---|
Northern Railway | Alambagh | AMVD | 15 | |
North Eastern Railway | Izzatnagar | IZND | 15 | |
Southern Railway | Erode | EDDX | 24 | |
1| | Total locomotives active as of September 2024[6] | 54 |
See also
editNotes
edit- ^ The Great Indian Peninsula Railway EA/1 class of 1928 may disagree.[opinion]
References
edit- ^ "Railmanak Lucknow" (PDF). rdso.indianrailways.gov.in. October 9, 1989.
- ^ "[IRFCA] A Brief History of Railway Electrification in India". www.irfca.org. Retrieved June 19, 2019.
- ^ "Railmanak Lucknow" (PDF). rdso.indianrailways.gov.in. October 9, 1989. p. 1.
- ^ "Electric Locomotive Roster: The WAP Series!". September 3, 2016.
- ^ a b "Dedicated Passenger Locomotives". www.irfca.org. Retrieved August 10, 2024.
- ^ "e-Locos".