This guide is a collection of techniques for improving the security and privacy of Apple silicon Mac computers running a currently supported version of macOS. Using Macs with Intel CPUs leaves you open to security vulnerabilities on the hardware level that Apple can't patch. Apple silicon Macs are the minimum recommendation but as a general rule, newer chips are always more secure.

This guide is targeted to power users who wish to adopt enterprise-standard security, but is also suitable for novice users with an interest in improving their privacy and security on a Mac.

If you're securing computers for an organization, use the official NIST guidelines for macOS.

A system is only as secure as its administrator is capable of making it. There is no one single technology, software, nor technique to guarantee perfect computer security; a modern operating system and computer is very complex, and requires numerous incremental changes to meaningfully improve one's security and privacy posture.

This guide is provided on an 'as is' basis without any warranties of any kind. Only you are responsible if you break anything or get in any sort of trouble by following this guide.

To suggest an improvement, send a pull request or open an issue.

• Basics
• Threat modeling
  • Identify assets
  • Identify adversaries
  • Identify capabilities
  • Identify mitigations
• Hardware
• Installing macOS
  • System activation
  • Apple Account
  • App Store
  • Virtualization
• First boot
• Admin and user accounts
  • Caveats
  • Setup
• Firmware
• FileVault
• Lockdown Mode
• Firewall
  • Application layer firewall
  • Third party firewalls
  • Kernel level packet filtering
• Services
• Siri Suggestions and Spotlight
• Homebrew
• DNS
  • DNS profiles
  • Hosts file
  • DNSCrypt
  • Dnsmasq
• Certificate authorities
• Privoxy
• Browser
  • Firefox
  • Chrome
  • Safari
  • Other browsers
  • Web browser privacy
• Tor
• VPN
• PGP/GPG
• Messengers
  • XMPP
  • Signal
  • iMessage
• Viruses and malware
  • Downloading Software
  • App Sandbox
  • Hardened Runtime
  • Antivirus
  • Gatekeeper
• System Integrity Protection
• Metadata and artifacts
• Passwords
• Backup
• Wi-Fi
• SSH
• Physical access
• System monitoring
  • OpenBSM audit
  • DTrace
  • Execution
  • Network
• Binary authorization
• Miscellaneous
• Related software
• Additional resources

General security best practices apply:

• Create a threat model

  • What are you trying to protect and from whom? Is your adversary a three letter agency, a nosy eavesdropper on the network, or a determined APT orchestrating a campaign against you?
  • Recognize threats and how to reduce attack surface against them.

• Keep the system and software up to date

  • Patch the operating system and all installed software regularly.
  • macOS system updates can be completed in the settings and set to automatically install. You can also use the softwareupdate command-line utility - neither requires registering an Apple account.
  • Subscribe to announcement mailing lists like Apple security-announce.

• Encrypt sensitive data

  • In addition to FileVault volume encryption, consider using the built-in password manager to protect passwords and other sensitive data.

• Assure data availability

  • Create regular backups of your data and be ready to restore from a backup in case of compromise.
  • Encrypt locally before copying backups to unencrypted external media or the "cloud"; alternatively, enable end-to-end encryption if your cloud provider supports it.
  • Verify backups by accessing them regularly.

• Click carefully

  • Ultimately, the security of a system depends on the capabilities of its administrator.
  • Care should be taken when installing new software; only install from official sources that the developers indicate on their official website/github/etc.

The first and most important step for security and privacy is to create a threat model. You need to understand your adversaries in order to defend against them. Each person will have their own needs so everyone's threat model will be different. Threat models tend to evolve over time as our situation changes, so be sure to periodically reassess your threat model.

This is probably a lot of things: your phone, your laptop, passwords stored on your devices, internet browsing history, etc. Make a list starting with the most important assets to protect. You can put them in categories based on how important they are: public, sensitive, or secret.

Define whom you are defending against. Start by defining the motivation they might have to attack your assets. Financial gain is a big motivator for many attackers, for example.

In order to counter your adversaries, you'll need to understand what they're capable of and what they're not capable of. Rank adversaries from totally unsophisticated to very advanced. For example, a common thief is not very sophisticated; they will likely be stopped by basic things like simply having a password and drive encryption on your device. A very advanced adversary like a state actor might require fully turning off your device when not in use to clear the keys from RAM and a long diceware password.

Now is when you decide the best way to counter each threat. You might avoid writing passwords down on paper so your roommate can't find them or you might encrypt the drive on your computer so a thief can't get data from it. It's important to balance security and usability; every mitigation should counter some capability of your adversaries, otherwise you might be making your life inconvenient for little to no gain. If you can't think of any more capabilities your adversaries might have and you've implemented mitigations for them all, your work is done.

Here's an example of the type of table you should make for each asset you want to protect:

Read more about threat modeling here.

macOS is most secure running on Apple hardware with Apple silicon. The newer the Mac, the better. Avoid hackintoshes and Macs that don't support the latest macOS, as Apple doesn't patch all vulnerabilities in versions that aren't the most recent one.

When you purchase your Mac, you might want to avoid it being linked back to you. Depending on your threat model, you should pay for it in cash in person rather than ordering online or purchasing with a credit/debit card, that way no identifying information can be linked back to your purchase.

If you want to use a wireless keyboard, mouse, headphones or other accessory, the most secure option is Apple ones since they will automatically be updated by your system. They also support the latest Bluetooth features like BLE Privacy which randomizes your Bluetooth hardware address to prevent tracking. With third party accessories, this isn't a guarantee.

There are several ways to install macOS. Choose your preferred method from the available options.

You should install the latest version of macOS that is compatible with your Mac. More recent versions have security patches and other improvements that older versions lack.

As part of Apple's theft prevention system, Apple silicon Macs will need to activate with Apple's servers every time you reinstall macOS to check against the database of stolen or activation-locked Macs.

You can read about exactly how this process works here.

Creating an Apple Account is not required to use macOS. Making an Apple Account requires a phone number and it will by default sync a lot of data to iCloud, Apple's cloud storage service. You can disable the syncing later if you want or enable end-to-end encryption for your iCloud data.

You can control the data associated with your Apple Account or completely delete it.

An Apple Account is required in order to access the App Store and use most Apple services like iCloud, Apple Music, etc.

The Mac App Store is a curated repository of software that is required to utilize the App Sandbox and Hardened Runtime, as well as offering automatic updates that integrate with your system.

The App Store offers the greatest security guarantees for software on macOS, but it requires you to log in with an Apple Account and Apple will be able to link your Apple Account to your downloaded apps.

You can easily run macOS natively in a virtual machine using UTM. It's free from their site but if you buy it from the App Store, you'll get automatic updates.

Follow their documentation to install a macOS VM with just a few clicks.

Another option is VMware Fusion. You can read their documentation to see how to install a macOS VM.

When macOS first starts, you'll be greeted by Setup Assistant.

When creating the first account, use a strong password without a hint.

If you enter your real name at the account setup process, be aware that your computer's name and local hostname will comprise that name (e.g., John Appleseed's MacBook) and thus will appear on local networks and in various preference files.

Both should be verified and updated as needed in System Settings > About or with the following commands after installation:

sudo scutil --set ComputerName MacBook
sudo scutil --set LocalHostName MacBook

The first user account is always an admin account. Admin accounts are members of the admin group and have access to sudo, which allows them to usurp other accounts, in particular root, and gives them effective control over the system. Any program that the admin executes can potentially obtain the same access, making this a security risk.

Utilities like sudo have weaknesses that can be exploited by concurrently running programs.

It is considered a best practice by Apple to use a separate standard account for day-to-day work and use the admin account for installations and system configuration.

It is not strictly required to ever log into the admin account via the macOS login screen. When a Terminal command requires administrator privileges, the system will prompt for authentication and Terminal then continues using those privileges. To that end, Apple provides some recommendations for hiding the admin account and its home directory. This can be an elegant solution to avoid having a visible 'ghost' account.

• Only administrators can install applications in /Applications (local directory). Finder and Installer will prompt a standard user with an authentication dialog. Many applications can be installed in ~/Applications instead (the directory can be created). As a rule of thumb: applications that do not require admin access – or do not complain about not being installed in /Applications – should be installed in the user directory, the rest in the local directory. Mac App Store applications are still installed in /Applications and require no additional authentication.
• sudo is not available in shells of the standard user, which requires using su or login to enter a shell of the admin account. This can make some maneuvers trickier and requires some basic experience with command-line interfaces.
• System Preferences and several system utilities (e.g. Wi-Fi Diagnostics) will require root privileges for full functionality. Many panels in System Preferences are locked and need to be unlocked separately by clicking on the lock icon. Some applications will simply prompt for authentication upon opening, others must be opened by an admin account directly to get access to all functions (e.g. Console).
• There are third-party applications that will not work correctly because they assume that the user account is an admin. These programs may have to be executed by logging into the admin account, or by using the open utility.
• See additional discussion in issue 167.

Accounts can be created and managed in System Preferences. On settled systems, it is generally easier to create a second admin account and then demote the first account. This avoids data migration. Newly installed systems can also just add a standard account.

Demoting an account can be done either from the the new admin account in System Preferences – the other account must be logged out – or by executing these commands (it may not be necessary to execute both, see issue 179):

sudo dscl . -delete /Groups/admin GroupMembership <username>
sudo dscl . -delete /Groups/admin GroupMembers <GeneratedUID>

To find the GeneratedUID of an account:

dscl . -read /Users/<username> GeneratedUID

See also this post for more information about how macOS determines group membership.

You should check that firmware security settings are set to Full Security to prevent tampering with your OS. This is the default setting.

All Mac models with Apple silicon are encrypted by default. Enabling FileVault makes it so that you need to enter a password in order to access the data on your drive. The EFF has a guide on generating strong but memorable passwords.

Your FileVault password also acts as a firmware password that will prevent people that don't know it from booting from anything other than the designated startup disk, accessing Recovery, and reviving it with DFU mode.

FileVault will ask you to set a recovery key in case you forget your password. Keep this key stored somewhere safe. You'll have the option use your iCloud account to unlock your disk; however, anyone with access to your iCloud account will be able to unlock it as well.

macOS offers Lockdown Mode, a security feature that disables several features across the OS, significantly reducing attack surface for attackers while keeping the OS usable. You can read about exactly what is disabled and decide for yourself if it is acceptable to you.

When Lockdown Mode is on, you can disable it per site in Safari on trusted sites.

There are several types of firewalls available for macOS.

Built-in, basic firewall which blocks incoming connections only. This firewall does not have the ability to monitor, nor block outgoing connections.

It can be controlled by the Firewall tab of Network in System Settings, or with the following commands.

Enable the firewall with logging and stealth mode:

sudo /usr/libexec/ApplicationFirewall/socketfilterfw --setglobalstate on

sudo /usr/libexec/ApplicationFirewall/socketfilterfw --setloggingmode on

sudo /usr/libexec/ApplicationFirewall/socketfilterfw --setstealthmode on

Computer hackers scan networks so they can attempt to identify computers to attack. You can prevent your computer from responding to some of these scans by using stealth mode. When stealth mode is enabled, your computer does not respond to ICMP ping requests, and does not answer to connection attempts from a closed TCP or UDP port. This makes it more difficult for attackers to find your computer.

To prevent built-in software as well as code-signed, downloaded software from being whitelisted automatically:

sudo /usr/libexec/ApplicationFirewall/socketfilterfw --setallowsigned off

sudo /usr/libexec/ApplicationFirewall/socketfilterfw --setallowsignedapp off

Applications that are signed by a valid certificate authority are automatically added to the list of allowed apps, rather than prompting the user to authorize them. Apps included in macOS are signed by Apple and are allowed to receive incoming connections when this setting is enabled. For example, since iTunes is already signed by Apple, it is automatically allowed to receive incoming connections through the firewall.

If you run an unsigned app that is not listed in the firewall list, a dialog appears with options to Allow or Deny connections for the app. If you choose "Allow", macOS signs the application and automatically adds it to the firewall list. If you choose "Deny", macOS adds it to the list but denies incoming connections intended for this app.

After interacting with socketfilterfw, restart the process by sending a line hangup signal:

sudo pkill -HUP socketfilterfw

Programs such as Little Snitch, Radio Silence, and LuLu provide a good balance of usability and security.

These programs are capable of monitoring and blocking incoming and outgoing network connections. However, they may require the use of a closed source system extension.

If the number of choices of allowing/blocking network connections is overwhelming, use Silent Mode with connections allowed, then periodically check the configuration to gain understanding of applications and what they are doing.

It is worth noting that these firewalls can be bypassed by programs running as root or through OS vulnerabilities (pdf), but they are still worth having - just don't expect absolute protection. However, some malware actually deletes itself and doesn't execute if Little Snitch, or other security software, is installed.

A highly customizable, powerful, but also most complicated firewall exists in the kernel. It can be controlled with pfctl and various configuration files.

pf can also be controlled with a GUI application such as Murus.

There are many books and articles on the subject of pf firewall. Here's is just one example of blocking traffic by IP address.

Add the following into a file called pf.rules:

wifi = "en0"
ether = "en7"
set block-policy drop
set fingerprints "/etc/pf.os"
set ruleset-optimization basic
set skip on lo0
scrub in all no-df
table <blocklist> persist
block in log
block in log quick from no-route to any
block log on $wifi from { <blocklist> } to any
block log on $wifi from any to { <blocklist> }
antispoof quick for { $wifi $ether }
pass out proto tcp from { $wifi $ether } to any keep state
pass out proto udp from { $wifi $ether } to any keep state
pass out proto icmp from $wifi to any keep state

Then use the following commands to manipulate the firewall:

• sudo pfctl -e -f pf.rules to enable the firewall and load the configuration
• sudo pfctl -d to disable the firewall
• sudo pfctl -t blocklist -T add 1.2.3.4 to add an IP address to the blocklist
• sudo pfctl -t blocklist -T show to view the blocklist
• sudo ifconfig pflog0 create to create an interface for logging
• sudo tcpdump -ni pflog0 to view filtered packets

Unless you're already familiar with packet filtering, spending too much time configuring pf is not recommended. It is also probably unnecessary if your Mac is behind a NAT on a private home network.

It is possible to use the pf firewall to block network access to entire ranges of network addresses, for example to a whole organization:

Query Merit RADb for the list of networks in use by an autonomous system, like Facebook:

whois -h whois.radb.net '!gAS32934'

Copy and paste the list of networks returned into the blocklist command:

sudo pfctl -t blocklist -T add 31.13.24.0/21 31.13.64.0/24 157.240.0.0/16

Confirm the addresses were added:

$ sudo pfctl -t blocklist -T show
No ALTQ support in kernel
ALTQ related functions disabled
   31.13.24.0/21
   31.13.64.0/24
   157.240.0.0/16

Confirm network traffic is blocked to those addresses (DNS requests will still work):

$ dig a +short facebook.com
157.240.2.35

$ curl --connect-timeout 5 -I http://facebook.com/
*   Trying 157.240.2.35...
* TCP_NODELAY set
* Connection timed out after 5002 milliseconds
* Closing connection 0
curl: (28) Connection timed out after 5002 milliseconds

$ sudo tcpdump -tqni pflog0 'host 157.240.2.35'
IP 192.168.1.1.62771 > 157.240.2.35.80: tcp 0
IP 192.168.1.1.62771 > 157.240.2.35.80: tcp 0
IP 192.168.1.1.62771 > 157.240.2.35.80: tcp 0
IP 192.168.1.1.62771 > 157.240.2.35.80: tcp 0
IP 192.168.1.1.162771 > 157.240.2.35.80: tcp 0

Outgoing TCP SYN packets are blocked, so a TCP connection is not established and thus a Web site is effectively blocked at the IP layer.

See drduh/config/scripts/pf-blocklist.sh for more inspiration.

Services on macOS are managed by launchd. See launchd.info.

You can manage and see more information about software that runs at login in System Settings. You can see installed System, Quick Look, Finder, and other extensions in System Settings as well.

• Use launchctl list to view running user agents
• Use sudo launchctl list to view running system daemons
• Specify the service name to examine it, e.g. launchctl list com.apple.Maps.mapspushd
• Use defaults read to examine job plists in /System/Library/LaunchDaemons and /System/Library/LaunchAgents
• Use man and strings to find out more about what an agent/daemon does

For example, to learn what a system launch daemon or agent does, start with:

defaults read /System/Library/LaunchDaemons/com.apple.apsd.plist

Look at the Program or ProgramArguments section to see which binary is run, in this case apsd. To find more information about that, look at the man page with man apsd

Note System services are protected by SIP, don't disable SIP just to tinker with system services as SIP is an integral part of security on macOS. Disabling system services could cause breakage and unstable behavior!

To view the status of services:

find /var/db/com.apple.xpc.launchd/ -type f -print -exec defaults read {} \; 2>/dev/null

Annotated lists of launch daemons and agents, the respective program executed, and the programs' hash sums are included in this repository.

Read more about launchd and where login items can be found on Apple's website.

Apple is moving to on-device processing for a lot of Siri functions, but some info is still sent to Apple when you use Siri Suggestions or Spotlight. You can read Apple's Privacy Policy to see exactly what is sent and how to disable it.

If your program isn't available through the App Store you can consider using Homebrew.

Important! Homebrew asks you to grant “App Management” (or “Full Disk Access”) permission to your terminal. This is a bad idea, as it would make you vulnerable to these attacks again: any non-sandboxed application can execute code with the TCC permissions of your terminal by adding a malicious command to (e.g.) ~/.zshrc. Granting “App Management” or “Full Disk Access” to your terminal should be considered the same as disabling TCC completely.

Remember to periodically run brew upgrade on trusted and secure networks to download and install software updates. To get information on a package before installation, run brew info <package> and check its formula online. You may also wish to enable additional security options, such as HOMEBREW_NO_INSECURE_REDIRECT=1

According to Homebrew's Anonymous Analytics, Homebrew gathers anonymous analytics and reports these to a self-hosted InfluxDB instance. To opt out of Homebrew's analytics, you can set export HOMEBREW_NO_ANALYTICS=1 in your environment or shell rc file, or use brew analytics off

macOS 11 introduced "DNS configuration profiles" to configure encrypted DNS, filter domains and use DNSSEC.

DNS profiles can be created or obtained from providers such as Quad9, AdGuard and NextDNS.

Use the hosts file to block known malware, advertising or otherwise unwanted domains.

Edit the hosts file as root, for example with sudo vi /etc/hosts

To block a domain by A record, append any one of the following lines to /etc/hosts:

0 example.com
0.0.0.0 example.com
127.0.0.1 example.com

Note IPv6 uses the AAAA DNS record type, rather than A record type, so you may also want to block those connections by also including ::1 example.com entries, like shown here.

There are many lists of domains available online which you can paste in, just make sure each line starts with 0, 0.0.0.0, 127.0.0.1, and the line 127.0.0.1 localhost is included.

Here are some popular and useful hosts lists:

• Sinfonietta/hostfiles
• StevenBlack/hosts
• someonewhocares.org

Append a list of hosts with tee:

curl https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts | sudo tee -a /etc/hosts

If you're using a firewall like Little Snitch, you could use the StevenBlack/hosts importing the rules from leohidalgo/little-snitch---rule-groups repository, these rules are updated every 12 hours from the StevenBlack/hosts repository.

To encrypt DNS traffic, consider using DNSCrypt/dnscrypt-proxy. Used in combination with dnsmasq and DNSSEC, the integrity of DNS traffic can be significantly improved.

Install DNSCrypt from Homebrew and follow the instructions to configure and start dnscrypt-proxy:

brew install dnscrypt-proxy

If using in combination with Dnsmasq, find the file homebrew.mxcl.dnscrypt-proxy.plist by running

brew info dnscrypt-proxy

which will show a location like /usr/local/etc/dnscrypt-proxy.toml

Open it in a text editor, find the line starting with listen_addresses = and edit that line to use DNScrypt on a port other than 53, like 5355:

listen_addresses = ['127.0.0.1:5355', '[::1]:5355']

Start DNSCrypt:

sudo brew services restart dnscrypt-proxy

Confirm DNSCrypt is running:

$ sudo lsof +c 15 -Pni UDP:5355
COMMAND          PID   USER   FD   TYPE             DEVICE SIZE/OFF NODE NAME
dnscrypt-proxy 15244 nobody    7u  IPv4 0x1337f85ff9f8beef      0t0  UDP 127.0.0.1:5355
dnscrypt-proxy 15244 nobody   10u  IPv6 0x1337f85ff9f8beef      0t0  UDP [::1]:5355
dnscrypt-proxy 15244 nobody   12u  IPv4 0x1337f85ff9f8beef      0t0  UDP 127.0.0.1:5355
dnscrypt-proxy 15244 nobody   14u  IPv6 0x1337f85ff9f8beef      0t0  UDP [::1]:5355

By default, dnscrypt-proxy runs on localhost (127.0.0.1), port 53, balancing traffic across a set of resolvers. If you would like to change these settings, you will have to edit the configuration file: $HOMEBREW_PREFIX/etc/dnscrypt-proxy.toml

Note Applications and programs may resolve DNS using their own provided servers. If dnscrypt-proxy is used, it is possible to disable all other, non-dnscrypt DNS traffic with the following pf rules:

block drop quick on !lo0 proto udp from any to any port = 53
block drop quick on !lo0 proto tcp from any to any port = 53

See also What is a DNS leak and ipv6-test.com

Among other features, dnsmasq is able to cache replies, prevent upstream queries for unqualified names, and block entire top-level domains.

Use in combination with DNSCrypt to additionally encrypt DNS traffic.

If you don't wish to use DNSCrypt, you should at least use DNS not provided by your ISP. Two popular alternatives are Google DNS and OpenDNS.

Optional DNSSEC is a set of extensions to DNS which provide to DNS clients (resolvers) origin authentication of DNS data, authenticated denial of existence, and data integrity. All answers from DNSSEC protected zones are digitally signed. The signed records are authenticated via a chain of trust, starting with a set of verified public keys for the DNS root-zone. The current root-zone trust anchors may be downloaded from IANA website. There are a number of resources on DNSSEC, but probably the best one is dnssec.net website.

Install Dnsmasq:

brew install dnsmasq --with-dnssec

Download and edit drduh/config/dnsmasq.conf or the default configuration file.

See drduh/config/domains for appendable examples on blocking services by domains.

Install and start the program (sudo is required to bind to privileged port 53):

sudo brew services start dnsmasq

To set dnsmasq as the local DNS server, open System Preferences > Network and select the active interface, then the DNS tab, select + and add 127.0.0.1, or use:

sudo networksetup -setdnsservers "Wi-Fi" 127.0.0.1

Confirm Dnsmasq is configured:

$ scutil --dns | head
DNS configuration

resolver #1
  search domain[0] : whatever
  nameserver[0] : 127.0.0.1
  flags    : Request A records, Request AAAA records
  reach    : 0x00030002 (Reachable,Local Address,Directly Reachable Address)

$ networksetup -getdnsservers "Wi-Fi"
127.0.0.1

Note Some VPN software overrides DNS settings on connect. See issue 24 and drduh/config/scripts/macos-dns.sh.

Optional Test DNSSEC validation for signed zones - the reply should have NOERROR status and contain ad flag:

$ dig +dnssec icann.org | head
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 47039
;; flags: qr rd ra ad; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 1

Test DNSSEC validation fails for zones that are signed improperly - the reply should have SERVFAIL status:

$ dig www.dnssec-failed.org | head
;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 15190
;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 1

macOS comes with over 100 root authority certificates installed from corporations like Apple, Verisign, Thawte, Digicert and government agencies from China, Japan, Netherlands, U.S., and more! These Certificate Authorities (CAs) are capable of issuing TLS certificates for any domain, code signing certificates, etc. Apple blocks these certificates when a CA proves to be untrustworthy. They also have strict requirements that trusted CAs have to meet.

For more information, see the CA/Browser Forum's website.

Inspect system root certificates in Keychain Access, under the System Roots tab or by using the security command line tool and /System/Library/Keychains/SystemRootCertificates.keychain file.

You can manually disable certificate authorities through Keychain Access by marking them as Never Trust and closing the window:

Warning: This will cause your browser to give a warning when you visit a site using certificates signed by these CAs and may cause breakage in other software. Don't distrust Apple root certificates or it will cause lots of breakage in macOS!

The risk of a man in the middle attack in which a coerced or compromised certificate authority trusted by your system issues a fake/rogue TLS certificate is quite low, but still possible.

Consider using Privoxy as a local proxy to filter Web traffic.

Install and start privoxy using Homebrew:

brew install privoxy

brew services start privoxy

Alternatively, a signed installation package for Privoxy is available from their website or Sourceforge. The signed package is more secure than the Homebrew version and receives support from the Privoxy project.

By default, Privoxy listens on local TCP port 8118.

Set the system HTTP proxy for the active network interface 127.0.0.1 and 8118:

sudo networksetup -setwebproxy "Wi-Fi" 127.0.0.1 8118

Set the system HTTPS proxy:

sudo networksetup -setsecurewebproxy "Wi-Fi" 127.0.0.1 8118

This can also be done through System Preferences > Network > Advanced > Proxies

Confirm the proxy is set:

$ scutil --proxy
<dictionary> {
  ExceptionsList : <array> {
    0 : *.local
    1 : 169.254/16
  }
  FTPPassive : 1
  HTTPEnable : 1
  HTTPPort : 8118
  HTTPProxy : 127.0.0.1
}

Although most Web traffic today is encrypted, Privoxy is still useful for filtering by domain name patterns, and for upgrading insecure HTTP requests.

For example, the following rules block all traffic, except to .net and github.com and all apple domains:

{ +block{all} }
.

{ -block }
.apple.
.github.com
.net

Or to just block Facebook domains, for example:

{ +block{facebook} }
.facebook*.
.fb.
.fbcdn*.
.fbinfra.
.fbsbx.
.fbsv.
.fburl.
.tfbnw.
.thefacebook.
fb*.akamaihd.net

Wildcards are also supported.

See drduh/config/privoxy/config and drduh/config/privoxy/user.action for additional Privoxy examples. Privoxy does not need to be restarted after editing user.action filter rules.

To verify traffic is blocked or redirected, use curl or the Privoxy interface available at http://p.p in the browser:

ALL_PROXY=127.0.0.1:8118 curl example.com -IL | head

HTTP/1.1 403 Request blocked by Privoxy
Content-Length: 9001
Content-Type: text/html
Cache-Control: no-cache
Pragma: no-cache

ALL_PROXY=127.0.0.1:8118 curl github.com -IL | head
HTTP/1.1 302 Local Redirect from Privoxy
Location: https://github.com/
Content-Length: 0

HTTP/1.1 200 Connection established

HTTP/2 200
server: GitHub.com

Note macOS proxy settings are not universal; apps and services may not honor system proxy settings. Ensure the application you wish to proxy is correctly configured and verify connections don't leak. Additionally, pf can be configured to transparently proxy traffic on certain ports.

The Web browser likely poses the largest security and privacy risk, as its fundamental job is to download and execute untrusted code from the Internet.

An important property of modern browsers is the Same Origin Policy (SOP) which prevents a malicious script on one page from obtaining access to sensitive data on another web page through the Document Object Model (DOM). If SOP is compromised, the security of the entire browser is compromised.

Many browser exploits are based on social engineering as a means of gaining persistence. Always be mindful of opening untrusted sites and especially careful when downloading new software.

Another important consideration about browser security is extensions. This is an issue affecting Firefox and Chrome alike. The use of browser extensions should be limited to only critically necessary ones published by trustworthy developers.

Mozilla Firefox, Google Chrome, Safari, and Tor Browser are all recommended browsers for their own unique and individual purposes.

Mozilla Firefox is a popular open source browser. Firefox replaced major parts of its infrastructure and code base under the projects Quantum and Photon. Part of the Quantum project is to replace C++ code with Rust. Rust is a systems programming language with a focus on security and thread safety. It is expected that Rust adoption will greatly improve the overall security posture of Firefox.

Firefox offers a similar security model to Chrome: it has a bug bounty program, although it is not as lucrative. Firefox follows a four-week release cycle.

Firefox supports user-supplied configuration files. See drduh/config/firefox.user.js and arkenfox/user.js for recommended preferences and hardening measures. Also see NoScript, an extension which allows selective script blocking.

Firefox focuses on user privacy. It supports tracking protection in Private Browsing mode. The tracking protection can be enabled for the default account, although it may break the browsing experience on some websites. Firefox in Strict tracking protection mode will randomize your fingerprint to foil basic tracking scripts. Firefox offers separate user profiles. You can separate your browsing inside a profile with Multi-Account Containers.

Firefox only supports Web Extensions through the Web Extension Api, which is very similar to Chrome. Submission of Web Extensions in Firefox is free. Web Extensions in Firefox most of the time are open source, although certain Web Extensions are proprietary.

Google Chrome is based on the open source Chromium project with certain proprietary components:

• Automatic updates with GoogleSoftwareUpdateDaemon
• Usage tracking and crash reporting, which can be disabled through Chrome's settings
• Media Codec support for proprietary codecs
• Chrome Web Store
• PDF viewer
• Non-optional tracking. Google Chrome installer includes a randomly generated token. The token is sent to Google after the installation completes in order to measure the success rate. The RLZ identifier stores information – in the form of encoded strings – like the source of chrome download and installation week. It doesn’t include any personal information and it’s used to measure the effectiveness of a promotional campaign. Chrome downloaded from Google’s website doesn’t have the RLZ identifier. The source code to decode the strings is made open by Google.

Chrome offers account sync between multiple devices. Part of the sync data includes credentials to Web sites. The data is encrypted with the account password.

Chrome's Web Store for extensions requires a 5 USD lifetime fee in order to submit extensions. The low cost allows the development of many quality Open Source Web Extensions that do not aim to monetize through usage.

Chrome has the largest share of global usage and is the preferred target platform for the majority of developers. Major technologies are based on Chrome's Open Source components, such as node.js which uses Chrome's V8 Engine and the Electron framework, which is based on Chromium and node.js. Chrome's vast user base makes it the most attractive target for threat actors and security researchers. Despite constant attacks, Chrome has retained an impressive security track record over the years. This is not a small feat.

Chrome offers separate profiles, robust sandboxing, frequent updates, and carries impressive credentials. In addition, Google offers a very lucrative bounty program for reporting vulnerabilities, along with its own Project Zero team. This means that a large number of highly talented and motivated people are constantly auditing and securing Chrome code.

Create separate Chrome profiles to reduce XSS risk and compartmentalize cookies/identities. In each profile, either disable Javascript in Chrome settings and configure allowed origins. You should also disable the V8 Optimizer for sites where you do use Javascript to further reduce attack surface. Go to Settings -> Privacy and security -> Security -> Manage v8 security -> Don't allow sites to use the V8 optimizer

Read more about the benefits of disabling this here.

You can block trackers with uBlock Origin Lite.

Change the default search engine from Google to reduce additional tracking.

Disable DNS prefetching (see also DNS Prefetching and Its Privacy Implications (pdf)). Note that Chrome may attempt to resolve DNS using Google's 8.8.8.8 and 8.8.4.4 public nameservers.

Read Chromium Security and Chromium Privacy for more information. Read Google's privacy policy to understand how personal information is collected and used.

Safari is the default browser on macOS. It is also the most optimized browser for reducing battery use. Safari, like Chrome, has both Open Source and proprietary components. Safari is based on the open source Web Engine WebKit, which is ubiquitous among the macOS ecosystem. WebKit is used by Apple apps such as Mail, iTunes, iBooks, and the App Store. Chrome's Blink engine is a fork of WebKit and both engines share a number of similarities.

Safari supports certain unique features that benefit user security and privacy. Content blockers enables the creation of content blocking rules without using Javascript. This rule based approach greatly improves memory use, security, and privacy. Safari 11 introduced Intelligent Tracking Prevention, which removes tracking data stored in Safari after a period of non-interaction by the user from the tracker's website. Safari can randomize your fingerprint to reduce tracking. Safari doesn't support certain features like WebUSB or the Battery API intentionally for security and privacy reasons. Private tabs in Safari have isolated cookies and cache that is destroyed when you close the tab. Safari also support Profiles which are equivalent to Firefox's Multi-Account Containers for separating cookies and browsing. Safari can be made significantly more secure with lockdown mode, which can be disabled per-site. Read more about tracking prevention in Safari.

Safari offers an invite-only bounty program for bug reporting to a select number of security researchers. The bounty program was announced during Apple's presentation at BlackHat 2016.

Web Extensions in Safari have an additional option to use native code in the Safari's sandbox environment, in addition to Web Extension APIs. Web Extensions in Safari are also distributed through Apple's App store. App store submission comes with the added benefit of Web Extension code being audited by Apple. On the other hand App store submission comes at a steep cost. Yearly developer subscription fee costs 100 USD (in contrast to Chrome's 5 USD fee and Firefox's free submission). The high cost is prohibitive for the majority of Open Source developers. As a result, Safari has very few extensions to choose from. However, you should keep the high cost in mind when installing extensions. It is expected that most Web Extensions will have some way of monetizing usage in order to cover developer costs. Be wary of Web Extensions whose source code is not open.

Safari syncs user preferences and passwords with iCloud Keychain. In order to be viewed in plain text, a user must input the account password of the current device. This means that users can sync data across devices with added security.

Safari follows a slower release cycle than Chrome and Firefox (3-4 minor releases, 1 major release, per year). Newer features are slower to be adopted to the stable channel. Security updates in Safari are handled independent of the stable release schedule and are installed through the App Store.

See also el1t/uBlock-Safari to disable hyperlink auditing beacons.

Many Chromium-derived browsers are not recommended. They are usually closed source, poorly maintained, and make dubious claims to protect privacy.

Other miscellaneous browsers, such as Brave, are not evaluated in this guide, so are neither recommended nor actively discouraged from use.

Web browsers reveal information in several ways, for example through the Navigator interface, which may include information such as the browser version, operating system, site permissions, and the device's battery level. Many websites also use canvas fingerprinting to uniquely identify users across sessions.

For more information about security conscious browsing and what data is sent by your browser, see HowTo: Privacy & Security Conscious Browsing, browserleaks.com, Am I Unique? and EFF Cover Your Tracks resources.

To hinder third party trackers, it is recommended to disable third-party cookies altogether. Safari, Firefox, and Chrome all block third party cookies by default. A third party cookie is a cookie associated with a file requested by a different domain than the one the user is currently viewing. Most of the time third-party cookies are used to create browsing profiles by tracking a user's movement on the web. Disabling third-party cookies prevents HTTP responses and scripts from other domains from setting cookies. Moreover, cookies are removed from requests to domains that are not the document origin domain, so cookies are only sent to the current site that is being viewed.

Also be aware of WebRTC, which may reveal your local or public (if connected to VPN) IP address(es). In Firefox and Chrome/Chromium this can be disabled with extensions such as uBlock Origin. Lockdown mode disables WebRTC in Safari.

Tor is an anonymizing network which can be used for browsing the Web with additional privacy. Tor Browser is a modified version of Firefox with a proxy to access the Tor network.

Download Tor Browser from Tor Project.

Do not attempt to configure other browsers or applications to use Tor as you may make a mistake which will compromise anonymity.

Download both the dmg and asc signature files, then verify the disk image has been signed by Tor developers:

$ cd ~/Downloads

$ file Tor*
TorBrowser-8.0.4-osx64_en-US.dmg:     bzip2 compressed data, block size = 900k
TorBrowser-8.0.4-osx64_en-US.dmg.asc: PGP signature Signature (old)

$ gpg Tor*asc
[...]
gpg: Can't check signature: No public key

$ gpg --recv 0x4E2C6E8793298290
gpg: key 0x4E2C6E8793298290: public key "Tor Browser Developers (signing key) <[email protected]>" imported
gpg: no ultimately trusted keys found
gpg: Total number processed: 1
gpg:               imported: 1

$ gpg --verify Tor*asc
gpg: assuming signed data in 'TorBrowser-8.0.4-osx64_en-US.dmg'
gpg: Signature made Mon Dec 10 07:16:22 2018 PST
gpg:                using RSA key 0xEB774491D9FF06E2
gpg: Good signature from "Tor Browser Developers (signing key) <[email protected]>" [unknown]
gpg: WARNING: This key is not certified with a trusted signature!
gpg:          There is no indication that the signature belongs to the owner.
Primary key fingerprint: EF6E 286D DA85 EA2A 4BA7  DE68 4E2C 6E87 9329 8290
     Subkey fingerprint: 1107 75B5 D101 FB36 BC6C  911B EB77 4491 D9FF 06E2

Make sure Good signature from "Tor Browser Developers (signing key) <[email protected]>" appears in the output. The warning about the key not being certified is benign, as it has not yet been assigned trust.

See How can I verify Tor Browser's signature? for more information.

To finish installing Tor Browser, open the disk image and drag the it into the Applications folder, or with:

hdiutil mount TorBrowser-8.0.4-osx64_en-US.dmg

cp -r /Volumes/Tor\ Browser/Tor\ Browser.app/ ~/Applications/

Verify the Tor application's code signature was made by with The Tor Project's Apple developer ID MADPSAYN6T, using the spctl -a -v and/or pkgutil --check-signature commands:

$ spctl -a -vv ~/Applications/Tor\ Browser.app
/Users/drduh/Applications/Tor Browser.app: accepted
source=Developer ID
origin=Developer ID Application: The Tor Project, Inc (MADPSAYN6T)

$ pkgutil --check-signature ~/Applications/Tor\ Browser.app
Package "Tor Browser.app":
   Status: signed by a certificate trusted by Mac OS X
   Certificate Chain:
    1. Developer ID Application: The Tor Project, Inc (MADPSAYN6T)
       SHA1 fingerprint: 95 80 54 F1 54 66 F3 9C C2 D8 27 7A 29 21 D9 61 11 93 B3 E8
       -----------------------------------------------------------------------------
    2. Developer ID Certification Authority
       SHA1 fingerprint: 3B 16 6C 3B 7D C4 B7 51 C9 FE 2A FA B9 13 56 41 E3 88 E1 86
       -----------------------------------------------------------------------------
    3. Apple Root CA
       SHA1 fingerprint: 61 1E 5B 66 2C 59 3A 08 FF 58 D1 4A E2 24 52 D1 98 DF 6C 60

You can also use the codesign command to examine an application's code signature:

$ codesign -dvv ~/Applications/Tor\ Browser.app
Executable=/Users/drduh/Applications/Tor Browser.app/Contents/MacOS/firefox
Identifier=org.torproject.torbrowser
Format=app bundle with Mach-O thin (x86_64)
CodeDirectory v=20200 size=229 flags=0x0(none) hashes=4+3 location=embedded
Library validation warning=OS X SDK version before 10.9 does not support Library Validation
Signature size=4247
Authority=Developer ID Application: The Tor Project, Inc (MADPSAYN6T)
Authority=Developer ID Certification Authority
Authority=Apple Root CA
Signed Time=Dec 10, 2018 at 12:18:45 AM
Info.plist entries=24
TeamIdentifier=MADPSAYN6T
Sealed Resources version=2 rules=12 files=128
Internal requirements count=1 size=188

To view full certificate details for a signed application, extract them with codesign and decode it with openssl:

$ codesign -d --extract-certificates ~/Applications/Tor\ Browser.app
Executable=/Users/drduh/Applications/Tor Browser.app/Contents/MacOS/firefox

$ file codesign*
codesign0: data
codesign1: data
codesign2: data

$ openssl x509 -inform der -in codesign0 -subject -issuer -startdate -enddate -noout
subject= /UID=MADPSAYN6T/CN=Developer ID Application: The Tor Project, Inc (MADPSAYN6T)/OU=MADPSAYN6T/O=The Tor Project, Inc/C=US
issuer= /CN=Developer ID Certification Authority/OU=Apple Certification Authority/O=Apple Inc./C=US
notBefore=Apr 12 22:40:13 2016 GMT
notAfter=Apr 13 22:40:13 2021 GMT

$ openssl x509 -inform der -in codesign0  -fingerprint -noout
SHA1 Fingerprint=95:80:54:F1:54:66:F3:9C:C2:D8:27:7A:29:21:D9:61:11:93:B3:E8

$ openssl x509 -inform der -in codesign0 -fingerprint -sha256 -noout
SHA256 Fingerprint=B5:0D:47:F0:3E:CB:42:B6:68:1C:6F:38:06:2B:C2:9F:41:FA:D6:54:F1:29:D3:E4:DD:9C:C7:49:35:FF:F5:D9

Tor traffic is encrypted to the exit node (i.e., cannot be read by a passive network eavesdropper), but Tor use can be identified - for example, TLS handshake "hostnames" will show up in plaintext:

$ sudo tcpdump -An "tcp" | grep "www"
listening on pktap, link-type PKTAP (Apple DLT_PKTAP), capture size 262144 bytes
.............". ...www.odezz26nvv7jeqz1xghzs.com.........
.............#.!...www.bxbko3qi7vacgwyk4ggulh.com.........
.6....m.....>...:.........|../*	Z....W....X=..6...C../....................................0...0..0.......'....F./0..	*.H........0%1#0!..U....www.b6zazzahl3h3faf4x2.com0...160402000000Z..170317000000Z0'1%0#..U....www.tm3ddrghe22wgqna5u8g.net0..0..

See Tor Protocol Specification and Tor/TLSHistory for more information.

You may wish to additionally obfuscate Tor traffic using a pluggable transport.

This can be done by setting up your own Tor relay or finding an existing private or public bridge to serve as an obfuscating entry node.

For extra security, use Tor inside a VirtualBox or VMware virtualized GNU/Linux or OpenBSD instance.

Finally, remember the Tor network provides anonymity, which is not necessarily synonymous with privacy. The Tor network does not guarantee protection against a global observer capable of traffic analysis and correlation. See also Seeking Anonymity in an Internet Panopticon (pdf) and Traffic Correlation on Tor by Realistic Adversaries (pdf).

Also see Invisible Internet Project (I2P) and its Tor comparison.

When choosing a VPN service or setting up your own, be sure to research the protocols, key exchange algorithms, authentication mechanisms, and type of encryption being used. Some protocols, such as PPTP, should be avoided in favor of OpenVPN or Linux-based Wireguard on a Linux VM or via a set of cross platform tools.

Some clients may send traffic over the next available interface when VPN is interrupted or disconnected. See scy/8122924 for an example on how to allow traffic only over VPN.

There is an updated guide to setting up an IPSec VPN on a virtual machine (hwdsl2/setup-ipsec-vpn) or a docker container (hwdsl2/docker-ipsec-vpn-server).

It may be worthwhile to consider the geographical location of the VPN provider. See further discussion in issue 114.

Also see this technical overview of the macOS built-in VPN L2TP/IPSec and IKEv2 client.

PGP is a standard for signing and encrypting data (especially email) end-to-end, so only the sender and recipient can access it.

GPG, or GNU Privacy Guard, is a GPL-licensed open source program compliant with the PGP standard.

GPG is used to verify signatures of software you download and install, as well as symmetrically or asymmetrically encrypt files and text.

Install from Homebrew with brew install gnupg.

If you prefer a graphical application, download and install GPG Suite.

Download drduh/config/gpg.conf to use recommended settings:

curl -o ~/.gnupg/gpg.conf https://raw.githubusercontent.com/drduh/config/master/gpg.conf

See drduh/YubiKey-Guide to securely generate and store GPG keys.

Read online guides and practice encrypting and decrypting email to yourself and your friends. Get them interested in this stuff!

XMPP is an open standard developed by the IETF that allows for cross-platform federated messaging. There are many options for clients. Consider using one of the browser-based clients to take advantage of your browser's sandbox.

Depending on the provider, you might not need anything other than a username and password to set up your account.

XMPP isn't E2EE by default, you'll need to use OMEMO encryption, so make sure your client supports it.

Signal is an advanced E2EE messenger whose double-ratchet protocol is used by countless other messengers including WhatsApp, Google Messages, and Facebook Messenger.

Signal requires a phone number to sign up and you'll need to install it on your phone first before you can use it on desktop.

iMessage is Apple's first party messenger. It requires an Apple Account in order to use it.

Make sure to enable Contact Key Verification and verify with anyone you message to ensure that you're messaging the right person.

You can use iMessage with either a phone number or an email, so pick one that you're comfortable with your contacts seeing.

Note: By default, iCloud backup is enabled which stores copies of your message encryption keys on Apple's servers without E2EE. Either disable iCloud backup or enable Advanced Data Protection to prevent this. Also remember to tell your messaging partner/s to do the same!

There is an ever-increasing amount of Mac malware in the wild. Macs aren't immune from viruses and malicious software!

Some malware comes bundled with both legitimate software, such as the Java bundling Ask Toolbar, and some with illegitimate software, such as Mac.BackDoor.iWorm bundled with pirated programs.

See Methods of malware persistence on Mac OS X (pdf) and Malware Persistence on OS X Yosemite to learn about how garden-variety malware functions.

Subscribe to updates at the Malwarebytes Blog for current Mac security news.

Also check out Hacking Team malware for macOS: root installation for MacOS, Support driver for Mac Agent and RCS Agent for Mac, which is a good example of advanced malware with capabilities to hide from userland (e.g., ps, ls). For more, see A Brief Analysis of an RCS Implant Installer and reverse.put.as

Only running programs from the App Store or that are Notarized by Apple will help mitigate malware. Apple performs an automated scan on notarized apps for malware. App Store apps undergo a review process to catch malware.

Otherwise, get programs from trusted sources like directly from the developer's website or GitHub. Always make sure that your browser/terminal is using HTTPS when downloading any program.

You should also avoid programs that ask for lots of permissions and third party closed source programs. Open source code allows anyone to audit and examine the code for security/privacy issues.

Check if a program uses the App Sandbox before running it by running the following command:

codesign -dvvv --entitlements - <path to your app>

If the App Sandbox is enabled, you will see

    [Key] com.apple.security.app-sandbox
    [Value]
        [Bool] true

Alternatively, you can check while the app is running by opening Activity Monitor and adding the "Sandbox" column.

All App Store apps are required to use the App Sandbox.

Note: Browsers like Google Chrome use their own sandbox so they don't use the App Sandbox.

Check if a program uses the Hardened Runtime before running it using the following command:

codesign --display --verbose /path/to/bundle.app

If Hardened Runtime is enabled, you will see flags=0x10000(runtime). The "runtime" means Hardened Runtime is enabled. There might be other flags, but the runtime flag is what we're looking for here.

You can enable a column in Activity Monitor called "Restricted" which is a flag that prevents programs from injecting code via macOS's dynamic linker. Ideally, this should say "Yes".

Notarized apps are required to use the Hardened Runtime.

To scan an application with multiple AV products and examine its behavior, upload it to VirusTotal before running it.

macOS comes with a built-in AV program called XProtect. XProtect automatically runs in the background and updates its signatures that it uses to detect malware without you having to do anything. If it detects malware already running, it will work to remove and mitigate it just like any other AV program.

Applications such as BlockBlock or maclaunch.sh might help prevent persistent malware.

Locally installed Anti-virus programs are generally a double-edged sword: they may catch "garden variety" malware, but also may increase the attack surface for sophisticated adversaries due to their privileged operating mode. They also typically phone home to send samples in order to catch the newest malware. This can be a privacy concern.

See Sophail: Applied attacks against Antivirus (pdf), Analysis and Exploitation of an ESET Vulnerability, Popular Security Software Came Under Relentless NSA and GCHQ Attacks, and How Israel Caught Russian Hackers Scouring the World for U.S. Secrets.

Gatekeeper tries to prevent non-notarized apps from running.

If you try to run an app that isn't notarized, Gatekeeper will give you a warning. This can be easily bypassed if you go to Privacy & Security, scroll down to the bottom and click Open on your app. Then Gatekeeper will allow you to run it.

Gatekeeper doesn't cover all binaries, only apps so be careful when running other file types.

To verify SIP is enabled, use the command csrutil status, which should return: System Integrity Protection status: enabled. Otherwise, enable SIP through Recovery Mode.

macOS attaches metadata (APFS extended attributes) to downloaded files, which can be viewed with the mdls and xattr commands:

$ ls -l@ ~/Downloads/TorBrowser-8.0.4-osx64_en-US.dmg
-rw-r--r--@ 1 drduh staff 63M Jan 1 12:00 TorBrowser-8.0.4-osx64_en-US.dmg
	com.apple.metadata:kMDItemWhereFroms	  46B
	com.apple.quarantine	  57B

$ mdls ~/Downloads/TorBrowser-8.0.4-osx64_en-US.dmg
kMDItemContentCreationDate         = 2019-01-01 00:00:00 +0000
kMDItemContentCreationDate_Ranking = 2019-01-01 00:00:00 +0000
kMDItemContentModificationDate     = 2019-01-01 00:00:00 +0000
kMDItemContentType                 = "com.apple.disk-image-udif"
kMDItemContentTypeTree             = (
    "public.archive",
    "public.item",
    "public.data",
    "public.disk-image",
    "com.apple.disk-image",
    "com.apple.disk-image-udif"
)
kMDItemDateAdded                   = 2019-01-01 00:00:00 +0000
kMDItemDateAdded_Ranking           = 2019-01-01 00:00:00 +0000
kMDItemDisplayName                 = "TorBrowser-8.0.4-osx64_en-US.dmg"
kMDItemFSContentChangeDate         = 2019-01-01 00:00:00 +0000
kMDItemFSCreationDate              = 2019-01-01 00:00:00 +0000
kMDItemFSCreatorCode               = ""
kMDItemFSFinderFlags               = 0
kMDItemFSHasCustomIcon             = (null)
kMDItemFSInvisible                 = 0
kMDItemFSIsExtensionHidden         = 0
kMDItemFSIsStationery              = (null)
kMDItemFSLabel                     = 0
kMDItemFSName                      = "TorBrowser-8.0.4-osx64_en-US.dmg"
kMDItemFSNodeCount                 = (null)
kMDItemFSOwnerGroupID              = 5000
kMDItemFSOwnerUserID               = 501
kMDItemFSSize                      = 65840402
kMDItemFSTypeCode                  = ""
kMDItemInterestingDate_Ranking     = 2019-01-01 00:00:00 +0000
kMDItemKind                        = "Disk Image"
kMDItemWhereFroms                  = (
    "https://dist.torproject.org/torbrowser/8.0.4/TorBrowser-8.0.4-osx64_en-US.dmg",
    "https://www.torproject.org/projects/torbrowser.html.en"
)

$ xattr -l ~/Downloads/TorBrowser-8.0.4-osx64_en-US.dmg
com.apple.metadata:kMDItemWhereFroms:
00000000  62 70 6C 69 73 74 30 30 A2 01 02 5F 10 4D 68 74  |bplist00..._.Mht|
00000010  74 70 73 3A 2F 2F 64 69 73 74 2E 74 6F 72 70 72  |tps://dist.torpr|
00000020  6F 6A 65 63 74 2E 6F 72 67 2F 74 6F 72 62 72 6F  |oject.org/torbro|
[...]
com.apple.quarantine: 0081;58519ffa;Google Chrome.app;1F032CAB-F5A1-4D92-84EB-CBECA971B7BC

Metadata attributes can also be removed with the -d flag:

xattr -d com.apple.metadata:kMDItemWhereFroms ~/Downloads/TorBrowser-8.0.4-osx64_en-US.dmg

xattr -d com.apple.quarantine ~/Downloads/TorBrowser-8.0.4-osx64_en-US.dmg

xattr -l ~/Downloads/TorBrowser-8.0.4-osx64_en-US.dmg

Other metadata and artifacts may be found in the directories including, but not limited to, ~/Library/Preferences/, ~/Library/Containers/<APP>/Data/Library/Preferences, /Library/Preferences, some of which is detailed below.

~/Library/Preferences/com.apple.sidebarlists.plist contains historical list of volumes attached. To clear it, use the command /usr/libexec/PlistBuddy -c "delete :systemitems:VolumesList" ~/Library/Preferences/com.apple.sidebarlists.plist

/Library/Preferences/com.apple.Bluetooth.plist contains Bluetooth metadata, including device history. If Bluetooth is not used, the metadata can be cleared with:

sudo defaults delete /Library/Preferences/com.apple.Bluetooth.plist DeviceCache
sudo defaults delete /Library/Preferences/com.apple.Bluetooth.plist IDSPairedDevices
sudo defaults delete /Library/Preferences/com.apple.Bluetooth.plist PANDevices
sudo defaults delete /Library/Preferences/com.apple.Bluetooth.plist PANInterfaces
sudo defaults delete /Library/Preferences/com.apple.Bluetooth.plist SCOAudioDevices

/var/spool/cups contains the CUPS printer job cache. To clear it, use the commands:

sudo rm -rfv /var/spool/cups/c0*
sudo rm -rfv /var/spool/cups/tmp/*
sudo rm -rfv /var/spool/cups/cache/job.cache*

To clear the list of iOS devices connected, use:

sudo defaults delete /Users/$USER/Library/Preferences/com.apple.iPod.plist "conn:128:Last Connect"
sudo defaults delete /Users/$USER/Library/Preferences/com.apple.iPod.plist Devices
sudo defaults delete /Library/Preferences/com.apple.iPod.plist "conn:128:Last Connect"
sudo defaults delete /Library/Preferences/com.apple.iPod.plist Devices
sudo rm -rfv /var/db/lockdown/*

Quicklook thumbnail data can be cleared using the qlmanage -r cache command, but this writes to the file resetreason in the Quicklook directories, and states that the Quicklook cache was manually cleared. Disable the thumbnail cache with qlmanage -r disablecache

It can also be cleared by getting the directory names with getconf DARWIN_USER_CACHE_DIR and sudo getconf DARWIN_USER_CACHE_DIR, then removing them:

rm -rfv $(getconf DARWIN_USER_CACHE_DIR)/com.apple.QuickLook.thumbnailcache/exclusive
rm -rfv $(getconf DARWIN_USER_CACHE_DIR)/com.apple.QuickLook.thumbnailcache/index.sqlite
rm -rfv $(getconf DARWIN_USER_CACHE_DIR)/com.apple.QuickLook.thumbnailcache/index.sqlite-shm
rm -rfv $(getconf DARWIN_USER_CACHE_DIR)/com.apple.QuickLook.thumbnailcache/index.sqlite-wal
rm -rfv $(getconf DARWIN_USER_CACHE_DIR)/com.apple.QuickLook.thumbnailcache/resetreason
rm -rfv $(getconf DARWIN_USER_CACHE_DIR)/com.apple.QuickLook.thumbnailcache/thumbnails.data

Similarly, for the root user:

sudo rm -rfv $(getconf DARWIN_USER_CACHE_DIR)/com.apple.QuickLook.thumbnailcache/thumbnails.fraghandler
sudo rm -rfv $(getconf DARWIN_USER_CACHE_DIR)/com.apple.QuickLook.thumbnailcache/exclusive
sudo rm -rfv $(getconf DARWIN_USER_CACHE_DIR)/com.apple.QuickLook.thumbnailcache/index.sqlite
sudo rm -rfv $(getconf DARWIN_USER_CACHE_DIR)/com.apple.QuickLook.thumbnailcache/index.sqlite-shm
sudo rm -rfv $(getconf DARWIN_USER_CACHE_DIR)/com.apple.QuickLook.thumbnailcache/index.sqlite-wal
sudo rm -rfv $(getconf DARWIN_USER_CACHE_DIR)/com.apple.QuickLook.thumbnailcache/resetreason
sudo rm -rfv $(getconf DARWIN_USER_CACHE_DIR)/com.apple.QuickLook.thumbnailcache/thumbnails.data
sudo rm -rfv $(getconf DARWIN_USER_CACHE_DIR)/com.apple.QuickLook.thumbnailcache/thumbnails.fraghandler

Also see 'quicklook' cache may leak encrypted data.

To clear Finder preferences:

defaults delete ~/Library/Preferences/com.apple.finder.plist FXDesktopVolumePositions
defaults delete ~/Library/Preferences/com.apple.finder.plist FXRecentFolders
defaults delete ~/Library/Preferences/com.apple.finder.plist RecentMoveAndCopyDestinations
defaults delete ~/Library/Preferences/com.apple.finder.plist RecentSearches
defaults delete ~/Library/Preferences/com.apple.finder.plist SGTRecentFileSearches

Additional diagnostic files may be found in the following directories - but caution should be taken before removing any, as it may break logging or cause other issues:

/var/db/CoreDuet/
/var/db/diagnostics/
/var/db/systemstats/
/var/db/uuidtext/
/var/log/DiagnosticMessages/

macOS stored preferred Wi-Fi data (including credentials) in NVRAM. To clear it, use the following commands:

sudo nvram -d 36C28AB5-6566-4C50-9EBD-CBB920F83843:current-network
sudo nvram -d 36C28AB5-6566-4C50-9EBD-CBB920F83843:preferred-networks
sudo nvram -d 36C28AB5-6566-4C50-9EBD-CBB920F83843:preferred-count

macOS may collect sensitive information about what you type, even if user dictionary and suggestions are off. To remove them, and prevent them from being created again, use the following commands:

rm -rfv "~/Library/LanguageModeling/*" "~/Library/Spelling/*" "~/Library/Suggestions/*"
chmod -R 000 ~/Library/LanguageModeling ~/Library/Spelling ~/Library/Suggestions
chflags -R uchg ~/Library/LanguageModeling ~/Library/Spelling ~/Library/Suggestions

QuickLook application support metadata can be cleared and locked with the following commands:

rm -rfv "~/Library/Application Support/Quick Look/*"
chmod -R 000 "~/Library/Application Support/Quick Look"
chflags -R uchg "~/Library/Application Support/Quick Look"

Document revision metadata is stored in /.DocumentRevisions-V100 and can be cleared and locked with the following commands - caution should be taken as this may break some core Apple applications:

sudo rm -rfv /.DocumentRevisions-V100/*
sudo chmod -R 000 /.DocumentRevisions-V100
sudo chflags -R uchg /.DocumentRevisions-V100

Saved application state metadata may be cleared and locked with the following commands:

rm -rfv ~/Library/Saved\ Application\ State/*
rm -rfv ~/Library/Containers/<APPNAME>/Data/Library/Saved\ Application\ State
chmod -R 000 ~/Library/Saved\ Application\ State/
chmod -R 000 ~/Library/Containers/<APPNAME>/Data/Library/Saved\ Application\ State
chflags -R uchg ~/Library/Saved\ Application\ State/
chflags -R uchg ~/Library/Containers/<APPNAME>/Data/Library/Saved\ Application\ State

Autosave metadata can be cleared and locked with the following commands:

rm -rfv "~/Library/Containers/<APP>/Data/Library/Autosave Information"
rm -rfv "~/Library/Autosave Information"
chmod -R 000 "~/Library/Containers/<APP>/Data/Library/Autosave Information"
chmod -R 000 "~/Library/Autosave Information"
chflags -R uchg "~/Library/Containers/<APP>/Data/Library/Autosave Information"
chflags -R uchg "~/Library/Autosave Information"

The Siri analytics database, which is created even if the Siri launch agent disabled, can be cleared and locked with the following commands:

rm -rfv ~/Library/Assistant/SiriAnalytics.db
chmod -R 000 ~/Library/Assistant/SiriAnalytics.db
chflags -R uchg ~/Library/Assistant/SiriAnalytics.db

~/Library/Preferences/com.apple.iTunes.plist contains iTunes metadata. Recent iTunes search data may be cleared with the following command:

defaults delete ~/Library/Preferences/com.apple.iTunes.plist recentSearches

If you do not use Apple Account-linked services, the following keys may be cleared, too, using the following commands:

defaults delete ~/Library/Preferences/com.apple.iTunes.plist StoreUserInfo
defaults delete ~/Library/Preferences/com.apple.iTunes.plist WirelessBuddyID

All media played in QuickTime Player can be found in:

~/Library/Containers/com.apple.QuickTimePlayerX/Data/Library/Preferences/com.apple.QuickTimePlayerX.plist

Additional metadata may exist in the following files:

~/Library/Containers/com.apple.appstore/Data/Library/Preferences/com.apple.commerce.knownclients.plist
~/Library/Preferences/com.apple.commerce.plist
~/Library/Preferences/com.apple.QuickTimePlayerX.plist

Generate strong passwords using urandom and tr:

tr -dc '[:graph:]' < /dev/urandom | fold -w 20 | head -1

The password assistant in Keychain Access can also generate secure credentials.

Consider using Diceware for memorable passwords.

GnuPG can also be used to manage passwords and other encrypted files (see drduh/Purse and drduh/pwd.sh).

Ensure all eligible online accounts have multi-factor authentication enabled. The strongest form of multi-factor authentication is WebAuthN, followed by app-based authenticators, and SMS-based codes are weakest.

YubiKey is an affordable hardware token with WebAuthN support. It can also be used to store cryptographic keys for GnuPG encryption and SSH authentication - see drduh/YubiKey-Guide.

Encrypt files locally before backing them up to external media or online services.

If your threat model allows it, you should follow the 3-2-1 backup model as outlined by CISA. Keep 3 copies: the original and two backups. Keep backups on 2 different media types, e.g. on a local drive and cloud storage. Store 1 copy offsite.

Time Machine is the built-in tool for handling backups on macOS. Get an external drive or network drive to back up to and encrypt your backups.

GnuPG can be used with a static password or public key (with the private key stored on YubiKey).

Compress and encrypt a directory using with a password:

tar zcvf - ~/Downloads | gpg -c > ~/Desktop/backup-$(date +%F-%H%M).tar.gz.gpg

Decrypt and decompress the directory:

gpg -o ~/Desktop/decrypted-backup.tar.gz -d ~/Desktop/backup-*.tar.gz.gpg

tar zxvf ~/Desktop/decrypted-backup.tar.gz

Encrypted volumes can also be created using Disk Utility or hdiutil:

hdiutil create ~/Desktop/encrypted.dmg -encryption -size 50M -volname "secretStuff"

hdiutil mount ~/Desktop/encrypted.dmg

cp -v ~/Documents/passwords.txt /Volumes/secretStuff

hdiutil eject /Volumes/secretStuff

Additional applications and services which offer backups include:

• Tresorit
• restic

macOS remembers access points it has connected to. Like all wireless devices, the Mac will broadcast all access point names it remembers (e.g., MyHomeNetwork) each time it looks for a network, such as when waking from sleep.

This is a privacy risk, so remove networks from the list in System Preferences > Network > Advanced when they are no longer needed.

Also see Signals from the Crowd: Uncovering Social Relationships through Smartphone Probes (pdf).

Saved Wi-Fi information (SSID, last connection, etc.) can be found in /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist

You can have a different, random MAC address for each network that rotates over time. This will help prevent you from being tracked across networks and on the same network over time.

macOS stores Wi-Fi SSIDs and passwords in NVRAM in order for Recovery Mode to access the Internet. Be sure to either clear NVRAM or de-authenticate your Mac from your Apple account, which will clear the NVRAM, before passing a Mac along. Resetting the SMC will clear some of the NVRAM, but not all.

Finally, WEP protection on wireless networks is not secure and you should only connect to WPA3 protected networks when possible.

For outgoing SSH connections, use hardware or password-protected keys, set up remote hosts and consider hashing them for added privacy. See drduh/config/ssh_config for recommended client options.

You can also use ssh to create an encrypted tunnel to send traffic through, similar to a VPN.

For example, to use Privoxy running on a remote host port 8118:

ssh -C -L 5555:127.0.0.1:8118 [email protected]

sudo networksetup -setwebproxy "Wi-Fi" 127.0.0.1 5555

sudo networksetup -setsecurewebproxy "Wi-Fi" 127.0.0.1 5555

Or to use an ssh connection as a SOCKS proxy:

ssh -NCD 3000 [email protected]

By default, macOS does not have sshd or Remote Login enabled.

To enable sshd and allow incoming ssh connections:

sudo launchctl load -w /System/Library/LaunchDaemons/ssh.plist

Or use the System Preferences > Sharing menu.

If enabling sshd, be sure to disable password authentication and consider further hardening your configuration. See drduh/config/sshd_config for recommended options.

Confirm whether sshd is running:

sudo lsof -Pni TCP:22

Keep your Mac physically secure at all times and do not leave it unattended in public.

A skilled attacker with unsupervised physical access could install a hardware keylogger to record all of your keystrokes. Using a Mac with a built-in keyboard or a bluetooth keyboard makes this more difficult as many off-the-shelf versions of this attack are designed to be plugged in between a USB keyboard and your computer.

To protect against physical theft during use, you can use an anti-forensic tool like BusKill or swiftGuard (updated usbkill, with graphical user interface). All respond to USB events and can immediately shutdown your computer if your device is physically separated from you or an unauthorized device is connected.

Consider purchasing a privacy screen/filter for use in public.

Nail polish and tamper-evidence seals can be applied to components to detect tampering.

macOS has a powerful OpenBSM (Basic Security Module) auditing capability. You can use it to monitor process execution, network activity, and much more.

To tail audit logs, use the praudit utility:

$ sudo praudit -l /dev/auditpipe
header,201,11,execve(2),0,Thu Sep  1 12:00:00 2015, + 195 msec,exec arg,/Applications/.evilapp/rootkit,path,/Applications/.evilapp/rootkit,path,/Applications/.evilapp/rootkit,attribute,100755,root,wheel,16777220,986535,0,subject,drduh,root,wheel,root,wheel,412,100005,50511731,0.0.0.0,return,success,0,trailer,201,
header,88,11,connect(2),0,Thu Sep  1 12:00:00 2015, + 238 msec,argument,1,0x5,fd,socket-inet,2,443,173.194.74.104,subject,drduh,root,wheel,root,wheel,326,100005,50331650,0.0.0.0,return,failure : Operation now in progress,4354967105,trailer,88
header,111,11,OpenSSH login,0,Thu Sep  1 12:00:00 2015, + 16 msec,subject_ex,drduh,drduh,staff,drduh,staff,404,404,49271,::1,text,successful login drduh,return,success,0,trailer,111,

See the manual pages for audit, praudit, audit_control and other files in /etc/security

Note although man audit says the -s flag will synchronize the audit configuration, it appears necessary to reboot for changes to take effect.

See articles on ilostmynotes.blogspot.com and derflounder.wordpress.com for more information.

Note System Integrity Protection interferes with DTrace, so it is not possible to use it in recent macOS versions without disabling SIP.

• iosnoop monitors disk I/O
• opensnoop monitors file opens
• execsnoop monitors execution of processes
• errinfo monitors failed system calls
• dtruss monitors all system calls

See man -k dtrace for more information.

ps -ef lists information about all running processes.

You can also view processes with Activity Monitor.

launchctl list and sudo launchctl list list loaded and running user and system launch daemons and agents.

List open network files:

sudo lsof -Pni

List contents of various network-related data structures:

sudo netstat -atln

Wireshark can be used from the command line with tshark.

Monitor DNS queries and replies:

tshark -Y "dns.flags.response == 1" -Tfields \
  -e frame.time_delta \
  -e dns.qry.name \
  -e dns.a \
  -Eseparator=,

Monitor HTTP requests and responses:

tshark -Y "http.request or http.response" -Tfields \
  -e ip.dst \
  -e http.request.full_uri \
  -e http.request.method \
  -e http.response.code \
  -e http.response.phrase \
  -Eseparator=/s

Monitor x509 (SSL/TLS) certificates:

tshark -Y "ssl.handshake.certificate" -Tfields \
  -e ip.src \
  -e x509sat.uTF8String \
  -e x509sat.printableString \
  -e x509sat.universalString \
  -e x509sat.IA5String \
  -e x509sat.teletexString \
  -Eseparator=/s -Equote=d

google/santa is a security software developed for Google's corporate Macintosh fleet and open sourced.

Santa is a binary and file access authorization system for macOS. It consists of a system extension that monitors for executions, a daemon that makes execution decisions based on the contents of a local database, a GUI agent that notifies the user in case of a block decision and a command-line utility for managing the system and synchronizing the database with a server.

Santa uses the Kernel Authorization API to monitor and allow/disallow binaries from executing in the kernel. Binaries can be white- or black-listed by unique hash or signing developer certificate. Santa can be used to only allow trusted code execution, or to blacklist known malware from executing on a Mac, similar to Bit9 software for Windows.

Note Santa does not currently have a graphical user interface for managing rules. The following instructions are for advanced users only!

To install Santa, visit the Releases page and download the latest disk image, the mount it and install the contained package:

hdiutil mount ~/Downloads/santa-0.9.20.dmg

sudo installer -pkg /Volumes/santa-0.9.20/santa-0.9.20.pkg -tgt /

By default, Santa installs in "Monitor" mode (meaning, nothing gets blocked, only logged) and comes with two rules: one for Apple binaries and another for Santa software itself.

Verify Santa is running and its kernel module is loaded:

$ santactl status
>>> Daemon Info
  Mode                   | Monitor
  File Logging           | No
  Watchdog CPU Events    | 0  (Peak: 0.00%)
  Watchdog RAM Events    | 0  (Peak: 0.00MB)
>>> Kernel Info
  Kernel cache count     | 0
>>> Database Info
  Binary Rules           | 0
  Certificate Rules      | 2
  Events Pending Upload  | 0

$ ps -ef | grep "[s]anta"
    0   786     1   0 10:01AM ??         0:00.39 /Library/Extensions/santa-driver.kext/Contents/MacOS/santad --syslog

$ kextstat | grep santa
  119    0 0xffffff7f822ff000 0x6000     0x6000     com.google.santa-driver (0.9.14) 693D8E4D-3161-30E0-B83D-66A273CAE026 <5 4 3 1>

Create a blacklist rule to prevent iTunes from executing:

$ sudo santactl rule --blacklist --path /Applications/iTunes.app/
Added rule for SHA-256: e1365b51d2cb2c8562e7f1de36bfb3d5248de586f40b23a2ed641af2072225b3.

Try to launch iTunes - it will be blocked.

$ open /Applications/iTunes.app/
LSOpenURLsWithRole() failed with error -10810 for the file /Applications/iTunes.app.

To remove the rule:

$ sudo santactl rule --remove --path /Applications/iTunes.app/
Removed rule for SHA-256: e1365b51d2cb2c8562e7f1de36bfb3d5248de586f40b23a2ed641af2072225b3.

Open iTunes:

$ open /Applications/iTunes.app/
[iTunes will open successfully]

Create a new, example C program:

$ cat <<EOF > foo.c
> #include <stdio.h>
> main() { printf("Hello World\n”); }
> EOF

Compile the program with GCC (requires installation of Xcode or command-line tools):

$ gcc -o foo foo.c

$ file foo
foo: Mach-O 64-bit executable x86_64

$ codesign -d foo
foo: code object is not signed at all

Run it:

$ ./foo
Hello World

Toggle Santa into "Lockdown" mode, which only allows authorized binaries to run:

$ sudo defaults write /var/db/santa/config.plist ClientMode -int 2

Try to run the unsigned binary:

$ ./foo
bash: ./foo: Operation not permitted

Santa

The following application has been blocked from executing
because its trustworthiness cannot be determined.

Path:       /Users/demouser/foo
Identifier: 4e11da26feb48231d6e90b10c169b0f8ae1080f36c168ffe53b1616f7505baed
Parent:     bash (701)

To authorize a binary, determine its SHA-256 sum:

$ santactl fileinfo /Users/demouser/foo
Path                 : /Users/demouser/foo
SHA-256              : 4e11da26feb48231d6e90b10c169b0f8ae1080f36c168ffe53b1616f7505baed
SHA-1                : 4506f3a8c0a5abe4cacb98e6267549a4d8734d82
Type                 : Executable (x86-64)
Code-signed          : No
Rule                 : Blacklisted (Unknown)

Add a new rule:

$ sudo santactl rule --whitelist --sha256 4e11da26feb48231d6e90b10c169b0f8ae1080f36c168ffe53b1616f7505baed
Added rule for SHA-256: 4e11da26feb48231d6e90b10c169b0f8ae1080f36c168ffe53b1616f7505baed.

Run it:

$ ./foo
Hello World

It's allowed and works!

Applications can also be allowed by developer certificate. For example, download and run Google Chrome - it will be blocked by Santa in "Lockdown" mode:

$ curl -sO https://dl.google.com/chrome/mac/stable/GGRO/googlechrome.dmg

$ hdiutil mount googlechrome.dmg

$ cp -r /Volumes/Google\ Chrome/Google\ Chrome.app /Applications/

$ open /Applications/Google\ Chrome.app/
LSOpenURLsWithRole() failed with error -10810 for the file /Applications/Google Chrome.app.

Authorize the application by the developer certificate (first item in the Signing Chain):

$ santactl fileinfo /Applications/Google\ Chrome.app/
Path                 : /Applications/Google Chrome.app/Contents/MacOS/Google Chrome
SHA-256              : 0eb08224d427fb1d87d2276d911bbb6c4326ec9f74448a4d9a3cfce0c3413810
SHA-1                : 9213cbc7dfaaf7580f3936a915faa56d40479f6a
Bundle Name          : Google Chrome
Bundle Version       : 2883.87
Bundle Version Str   : 55.0.2883.87
Type                 : Executable (x86-64)
Code-signed          : Yes
Rule                 : Blacklisted (Unknown)
Signing Chain:
     1. SHA-256             : 15b8ce88e10f04c88a5542234fbdfc1487e9c2f64058a05027c7c34fc4201153
        SHA-1               : 85cee8254216185620ddc8851c7a9fc4dfe120ef
        Common Name         : Developer ID Application: Google Inc.
        Organization        : Google Inc.
        Organizational Unit : EQHXZ8M8AV
        Valid From          : 2012/04/26 07:10:10 -0700
        Valid Until         : 2017/04/27 07:10:10 -0700

     2. SHA-256             : 7afc9d01a62f03a2de9637936d4afe68090d2de18d03f29c88cfb0b1ba63587f
        SHA-1               : 3b166c3b7dc4b751c9fe2afab9135641e388e186
        Common Name         : Developer ID Certification Authority
        Organization        : Apple Inc.
        Organizational Unit : Apple Certification Authority
        Valid From          : 2012/02/01 14:12:15 -0800
        Valid Until         : 2027/02/01 14:12:15 -0800

     3. SHA-256             : b0b1730ecbc7ff4505142c49f1295e6eda6bcaed7e2c68c5be91b5a11001f024
        SHA-1               : 611e5b662c593a08ff58d14ae22452d198df6c60
        Common Name         : Apple Root CA
        Organization        : Apple Inc.
        Organizational Unit : Apple Certification Authority
        Valid From          : 2006/04/25 14:40:36 -0700
        Valid Until         : 2035/02/09 13:40:36 -0800

In this case, 15b8ce88e10f04c88a5542234fbdfc1487e9c2f64058a05027c7c34fc4201153 is the SHA-256 of Google’s Apple developer certificate (team ID EQHXZ8M8AV) - authorize it:

$ sudo santactl rule --whitelist --certificate --sha256 15b8ce88e10f04c88a5542234fbdfc1487e9c2f64058a05027c7c34fc4201153
Added rule for SHA-256: 15b8ce88e10f04c88a5542234fbdfc1487e9c2f64058a05027c7c34fc4201153.

Google Chrome should now launch, and subsequent updates to the application will continue to work as long as the code signing certificate doesn’t change or expire.

To disable "Lockdown" mode:

sudo defaults delete /var/db/santa/config.plist ClientMode

See /var/log/santa.log to monitor ALLOW and DENY execution decisions.

A log and configuration server for Santa is available in Zentral, an open source event monitoring solution and TLS server for osquery and Santa.

Zentral will support Santa in both MONITORING and LOCKDOWN operation mode. Clients need to be enrolled with a TLS connection to sync Santa Rules, all Santa events from endpoints are aggregated and logged back in Zentral. Santa events can trigger actions and notifications from within the Zentral Framework.

Note Python, Bash and other interpreters are authorized (since they are signed by Apple's developer certificate), so Santa will not be able to block such scripts from executing. Thus, a potential non-binary program which disables Santa is a weakness (not vulnerability, since it is so by design) to take note of.

Disable Diagnostics & Usage Data.

If you want to play music or watch videos, use QuickTime Player, the built-in media player in macOS. It uses the App Sandbox, Hardened Runtime, and benefits from the Signed System Volume as part of the base system.

If you want to use torrents, use Transmission which is free and open source (note: like all software, even open source projects, malware may still find its way in). You may also wish to use a block list to avoid peering with known bad hosts - see Which is the best blocklist for Transmission and johntyree/3331662.

Manage default file handlers.

Monitor system logs with the Console application or syslog -w or /usr/bin/log stream commands.

Set your screen to lock as soon as the screensaver starts:

defaults write com.apple.screensaver askForPassword -int 1

defaults write com.apple.screensaver askForPasswordDelay -int 0

Expose hidden files and Library folder in Finder:

defaults write com.apple.finder AppleShowAllFiles -bool true

chflags nohidden ~/Library

Show all filename extensions (so that "Evil.jpg.app" cannot masquerade easily).

defaults write NSGlobalDomain AppleShowAllExtensions -bool true

Don't default to saving documents to iCloud:

defaults write NSGlobalDomain NSDocumentSaveNewDocumentsToCloud -bool false

Enable Secure Keyboard Entry in Terminal (unless you use YubiKey or applications such as TextExpander).

Disable crash reporter (the dialog which appears after an application crashes and prompts to report the problem to Apple):

defaults write com.apple.CrashReporter DialogType none

Disable Bonjour multicast advertisements:

Warning: This will cause problems with AirPlay and AirPrint!

sudo defaults write /Library/Preferences/com.apple.mDNSResponder.plist NoMulticastAdvertisements -bool YES

Disable Handoff and Bluetooth features, if they aren't necessary.

Check that your apps are sandboxed in Activity Monitor.

macOS comes with this line in /etc/sudoers:

Defaults env_keep += "HOME MAIL"

Which stops sudo from changing the HOME variable when you elevate privileges. This means it will execute as root the zsh dotfiles in the non-root user's home directory when you run "sudo zsh". It is advisable to comment this line out to avoid a potentially easy way for malware or a local attacker to escalate privileges to root.

If you want to retain the convenience of the root user having a non-root user's home directory, you can append an export line to /var/root/.zshrc, e.g.:

export HOME=/Users/blah

Set a custom umask:

sudo launchctl config user umask 077

Reboot, create a file in Finder and verify its permissions (macOS default allows 'group/other' read access):

$ ls -ld umask*
drwx------  2 kevin  staff       64 Dec  4 12:27 umask_testing_dir
-rw-------@ 1 kevin  staff  2026566 Dec  4 12:28 umask_testing_file

• CISOfy/lynis - Cross-platform security auditing tool and assists with compliance testing and system hardening.
• Zentral - A log and configuration server for santa and osquery. Run audit and probes on inventory, events, logfiles, combine with point-in-time alerting. A full Framework and Django web server build on top of the elastic stack (formerly known as ELK stack).
• osquery - Can be used to retrieve low level system information. Users can write SQL queries to retrieve system information.

• Apple Open Source
• CIS Benchmarks
• EFF Surveillance Self-Defense Guide
• iOS, The Future Of macOS, Freedom, Security And Privacy In An Increasingly Hostile Global Environment
• Patrick Wardle's Objective-See blog
• Reverse Engineering macOS blog
• Reverse Engineering Resources
• The macOS Phishing Easy Button: AppleScript Dangers
• iCloud security and privacy overview