Connect RaspberryPi GPIOs and 1-Wire temperature sensors to MQTT 🍰🔘📡
Prerequisite: Node.js version 6.0 or above. I suggest to use https://github.com/tj/n to install a recent version of Node.js.
Install rpi2mqtt:
$ sudo npm install -g rpi2mqtt
To run rpi2mqtt in background and start on system boot I suggest to use PM2.
Usage: rpi2mqtt [options]
Options:
-c, --config use config file [default: "~/.pi2mqtt/config.json"]
-l, --log log to file [default: "~/.pi2mqtt/daemon.log"]
-v, --verbosity possible values: "error", "info", "debug" [default: "error"]
-a, --alias alias topics. can be used multiple times. See examples
-i, --in, --input use gpio as input. can be used multiple times. See examples
-o, --out, --output use gpio as output. can be used multiple times. See examples
-p, --payload type of the mqtt payload. possible values are "plain" and "json" [default: "plain"]
-r, --retain publish with retain flag
-t, --status-topic topic prefix for status messages [default: "hostname/status/"]
-z, --set-topic topic prefix for set messages [default: "hostname/set/"]
-x, --testament topic for connect and last will message [default: "connected"]
-u, --url broker url. See https://github.com/mqttjs/MQTT.js#connect-using-a-url [default: "mqtt://127.0.0.1"]
-s, --w1-wait seconds to wait before reading /sys/bus/w1/devices/ [default: 30]
-n, --w1-interval polling interval for 1-wire temperature sensors in seconds [default: 30]
-w, --w1-disable disable 1-wire
-h, --help show help
--version Show version number
Examples:
index.js -w -i 17 -i 18 -o 23 Disable 1-Wire, use GPIO17/18 as
inputs and GPIO23 as output
index.js -t -o 17 -a Use 1-wire and GPIO17 as output. Set
w1/28-0000002981762:Temperature/Garden mqtt topic aliases and remove topic
-a gpio/17:Light/Garden prefix
Default prefix is the hostname. You can disable the topic prefix with empty option --topic
<prefix>/status/w1/<1-wire-serial>
By default status topic is <hostname>/status, this can be changed through the command-line option --status-topic.
Example: raspberry/status/w1/28-000005908b0e
<status-topic>/gpio/<gpio-number>
Example: raspberry/status/gpio/17
<set-topic>/gpio/<gpio-number>
By default the set topic is <hostname>/set, this can be changed through the command-line option --set-topic.
Example: raspberry/set/gpio/23
The payload can be a plain number (0, 1) or the strings false and true.
You can set individual topics with the --alias option.
Example: rpi2mqtt -a w1/28-000005908b0e:Temperature/Garden
If you want to use spaces in the topic use quotes around the whole -a option, like e.g.
-a "w1/28-0000012345:Temperature Garden".
Mind that aliases don't affect the configured prefix. So rpi2mqtt -o 17 -a gpio/17:Light/Garden -t Raspberry5 would
result in topic Raspberry5/Light/Garden for GPIO 17.
- Integrate https://github.com/hobbyquaker/piplate2mqtt
- PiFace
- Displays
- uart/spi/i2c?
MIT Copyright (c) Sebastian Raff