Signed in as:
Within the past couple years, CCTV installers and integrators have been running into an installation roadblock. Roofers/building management are telling us we can no longer mount our PTZ cameras with the factory authorized parapet mount, either bolted into the roof top or into the parapet wall. By puncturing the rubber roof membrane, we will be voiding the roofs warranty and inviting liability and financial loss to ourselves, not to mention potential damage and loss to our clients. The PTZsled is the solution to our problems.
The PTZsled is the only non-penetrating roof mount that is specifically designed for PTZ cameras and their brand specific factory authorized parapet mounting arm. The PTZsled gives you the freedom to install your cameras anywhere on the flat roof top while keeping the roofs membrane intact. Our design is simple to use and will cut your installation time in half.
We are constantly adding new camera brands to our list; if you don't see your preferred vendor, please contact us and we will add it. If you have any questions while on our site, please send us a message or give us a call.
It's easy! If you are using an Axis PTZ camera, choose the Axis PTZsled.
We list the model numbers to the compatible mounting arms in the description, make sure your arm is on the list; If it is not, please call us 303-818-9619.
We recommend purchasing a 1/2-inch barrier mat for every sled; this will protect the roof membrane from the heavy metal base.
We also make a cover that gives the PTZsled a clean finished look. This is very popular when the PTZsled is on a lower rooftop and visible from buildings with higher windows such as casinos and hotels.
Shipping cost is $75-$85 per sled to the lower 48 states. If you require international shipping or shipping outside the contiguous US, please call for a quote.
Orders of 1 to 4 units will be shipped by UPS.
Larger orders will be palletized and shipped through R&L Carriers.
Assemble the sled and your cameras mounting arm in less than 5 minutes.
No Drilling = No Leaks
Made STRONG to hold your expensive and heavy PTZ cameras...
L29" x W18" x H18" Weight: 50 LBS
Weight w/ 3 blocks: 164 LBS
If you don't see yours here, please contact us.
Please Contact Us For Bulk Orders and Freight Shipping Quotes. All Shipping Quoted Is For Lower Continental US. Please Call Us For International Shipping Quote.
PTZsled_Doc_2023 (pdf)
Download12650 W. 64th Ave Suite E-222, Arvada, CO 80004
PTZsled.com
12650 W. 64th Ave Suite E-222, Arvada, CO 80004
Copyright © 2024 PTZsled.com - All Rights Reserved.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.