Sort by
TSH0802
- Drop Forged Steel Head
- Blackened Finished Head
- Polished Face
- Fiberglass Shaft with Vinyl Grip
- 1-3/4LB
TSH0061
10lb(4.54kg) Drop Forged Steel Head Sledge Hammer with Long Fibreglass Shaft and Rubber Grip
TSH0065
12lb(5.4kg) Drop Forged Steel Head Sledge Hammer with Long Fiberglass Shaft and Rubber Grip
TSH0066
14lb(6.35kg) Drop Forged Steel Head Sledge Hammer with Long Fibreglass Shaft and Rubber Grip
TSH1450
16oz (450g) Carbon Steel Head Claw Hammer with Tubular Steel Shaft
TSH3450
16oz Carbon Steel Head Claw Hammer with Wood Handle
G008-02730
- High-quality drop forged steel.
- Fully polished heads.
- Nonslip handle.
TSH0416
- One Piece Forged Steel
- Cushion Grip
- 16oz
TSH0902
- Solid Black Rubber Head
- Hard Wood Handle
- 1LB
TSH1560
20oz (560g) Carbon Steel Head Claw Hammer with Tubular Steel Shaft
TSH0565
20oz Cushion Grip Claw Hammer, 6/Case
TSH9560
20oz Solid One-Piece Claw Hammer
TSH9680
24oz Solid One-Piece Claw Hammer
TSH8020
2lb Club Hammer with Fibreglass Shaft
D032-24615
- Wide chisel with two 60 deg angles clean concrete, scale and rust
- Cuts troughs and some asphalt
- Cuts troughs and some asphalt
TSH0830
- Drop Forged Steel Head
- Blackened Finished Head
- Polished Face
- Fiberglass Shaft with Vinyl Grip
- 3-3/4LB
GT SLEDGE
45# Carbon Sledge Hammer
TSH8040
4lb Club Hammer with Fibreglass Shaft
K004-46966
- Head forged from brass for softer, non-damaging blow.
- Head is pinned to handle as well as epoxied to prevent head coming off.
- Comfortable, thick rubber grip handle for better protection from shock and vibration.
- Handle includes both overstrike protection and large sweep at base to prevent loss of grip.
- This product must be maintained in accordance with Australian standar AS 3797:1991.
K004-52010
- Head forged from brass for softer, non-damaging blow.
- Head is pinned to handle as well as epoxied to prevent head coming off.
- Comfortable, thick rubber grip handle for better protection from shock and vibration.
- Handle includes both overstrike protection and large sweep at base to prevent loss of grip.
- This product must be maintained in accordance with Australian standar AS 3797:1991.
K004-81004
- High-strength fiberglass shaft absorbs shock and keeps head tight and comfortable, perforated neoprene grip is bonded to the handle
- Extra-long neck, and narrow striking face are ideal for reaching into outlet boxes and other tight areas
- Balanced and designed specifically for use in electrical work
- Made in USA
- Always wear approved eye protection.
K004-81606
- Rugged and well-balanced, with the weight to drive lag bolts
- Forged, tempered-steel head is only 3-3/4-Inch (95 mm) long for use in tight areas
- Identical faces with 1-3/4-Inch (44 mm) round-crown driving surface and beveled edges
- Made in USA
- Always wear approved eye protection.
K004-81000
- Other face is smooth for driving heavier duty hardware
- Rugged and well-balanced, with the weight to drive lag bolts
- Forged, tempered-steel head is only 3-3/4-Inches (95 mm) long for use in tight areas
- Made in USA
- Always wear approved eye protection.