1. Introduction
The jujube black spot disease, caused by the pathogen
Alternaria alternata (
A. alternata), poses a significant threat to human health due to the production of harmful secondary metabolites. A recent survey indicated that the disease prevalence was below 10% in early August. Nonetheless, the situation escalated sharply, with the infection rate surging to 20-30% just before the harvest. During the post-harvest period, the disease incidence surged to over 50% within a mere 30 days, leading to devastating losses. Therefore, it is imperative to implement strategies during the post-harvest storage phase of jujubes that effectively suppress the growth and reproduction of Alternaria fungi [
1]. These interventions are pivotal for extending the shelf life and maintaining the quality of jujubes.
Chitosan (CS) and its derivatives are natural biopolymers renowned for their exceptional biocompatibility and degradability, playing crucial roles in postharvest fruit preservation and antimicrobial fields [
2,
3,
4]. Nonetheless, the efficacy of chitosan in suppressing pathogenic fungi in fruits is subject to certain constraints. Its adsorption capacity is insufficient, and it faces challenges in forming a stable film, which hinders its broader application in various fields. For instance, the decay rate of jujubes coated with chitosan reached 26% after 42 days storage [
5]. Zhang et al. [
6] reported that chitosan exhibits an inhibitory effect on Aspergillus but is ineffective against Penicillium. Penicillium. Therefore, integrating chitosan with other fungal inhibitors is anticipated to more effectively reduce the incidence of black spot disease in jujubes.
The amalgamation of metal oxides or metal nanoparticles with chitosan serves as an effective strategy to enhance their antibacterial capabilities. For instance, the integration of nanomaterials such as titanium dioxide (TiO
2) [
7], zinc oxide (ZnO) [
8,
9], silver (Ag) [
10,
11,
12], and copper oxide (CuO) [
13] into chitosan has been a integration, providing innovative opportunities for the innovation of antibacterial preservation materials [
14]. Silver nanoparticles (AgNPs) boast superior antibacterial efficacy, exceptional thermal stability, and reduced toxicity compared to other metal nanoparticles [
15,
16,
17]. Nevertheless, the direct application of AgNPs may pose potential health risks, particularly to the human liver. The researchers have explored the combination of AgNPs with various biopolymers, including starch, chitosan, and cellulose, which substantially diminishes the release of AgNPs to mitigate this [
18,
19,
20]. Our research group's previous studies have established that ultrasonic treatment enables chitosan to efficiently reduce AgNO3, thereby synthesizing silver nanoparticles (AgNPs) [
21,
22]. These AgNPs are subsequently encapsulated within the chitosan matrix, forming chitosan-silver nanoparticles (CS-AgNPs). This approach effectively circumvents the issue of AgNPs agglomeration and oxidation in air. Furthermore, the CS-AgNP gel has been shown to effectively inhibit the growth and reproduction of fungal pathogens such as P. expansum, A. Niger and B. cinerea in grapes [
23].
In this study, we have utilized the in-situ generated CS-AgNPs gel for the prevention and treatment of black spot disease in jujubes during storage. The experimental results indicate that the CS-AgNPs gel exhibits a significant inhibitory effect on the genus Aspergillus. Additionally, a comprehensive investigation into the additive inhibitory mechanism of CS and AgNPs on fungi was conducted, employing the fractional inhibitory concentration index (FICI). This research presents a novel approach for the preparation of natural antimicrobial and preservation materials.
2. Results and Discussion
2.1. Fungal Identification
The colonies display a flat, dense, velvety structure that proliferates rapidly, initially appearing as a dark white and then transitioning to light or dark green hues (
Figure 1). The morphological examination and phylogenetic tree analysis have conclusively confirmed the identification of the fungus as A. alternata (
Figure 2).
2.2. CS–AgNPs Hydrogel Characterization
The CS-AgNPs hydrogel exhibited outstanding gelation properties (
Figure 3a). The morphology of the AgNPs was assessed through transmission electron microscopy (TEM) images, which revealed the formation of AgNPs ranging in size from 80 to 110 nm (
Figure 3b).
The FTIR spectra of the CS powders and the CS-AgNPs xerogels were confirmed the complexation between CS and Ag
+. The amide band at 1600 cm
-1 underwent a blue shift, and the C-N band at 1420cm
-1 a red shift from CS to CS-AgNPs xerogel (
Figure 4a). These shifts revealed that both -OH and -NH
2 groups in the CS chains took part in the coordination complexation. This is consistent with previous research reports [
23]. The time-dependent UV-vis absorption spectrum indicated that the process is not time dependent, which suggested a high degree of stability in the complexation between Ag
+ and CS polymer chains. (
Figure 4b).
2.3. Inhibition of CS-AgNPs Hydrogel on A. alternata In Vitro
The inhibitory effects of CS, AgNO
3, and CS-AgNPs gels against the fungus
A. alternata are depicted in
Figure 5. Compared to the control group (CK), the presence of
A. alternata was not observed on the filter paper treated with CS. Although the inhibitory effect was minimal, with the inhibition zone being barely detectable. This implies that while Alternarin cannot proliferate on CS, it does not exert a significant inhibitory influence on the fungus. The filter paper treated with Ag
+ displayed a distinct antibacterial circle, indicating that Ag
+ effectively inhibits
A. alternata fungi. The CS-AgNPs gel demonstrated a substantial inhibitory zone against
A. alternata fungi, with the zone of inhibition expanding over time, signifying a pronounced inhibitory action.
2.4. Quantitative Assay of the Antimicrobial Activity
The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of CS and CS-AgNPs for
A. alternata were determined by microdilution, and the results are shown in
Table 1.
The research findings clearly demonstrate that the antimicrobial effect of AgNO
3 on
A. alternata is significantly superior to that of chitosan (CS), exhibiting a more pronounced antimicrobial efficacy. Furthermore, the inhibitory effect of CS-AgNPs was not significantly different from that of AgNO
3. According to the equation (Details in
Section 3.6.2), the fractional inhibitory concentration index (FICI) was calculated based on the MIC value of the CS-AgNps mixture, and the interaction between CS and AgNps was analyzed. The change of the inhibitory concentration effect of CS-AgNps on the growth of
A. alternata were determined. Antimicrobial testing on different proportions of AgNPs and CS solution mixture revealed FICI values ranging from 0.52 to 0.97, which indicated CS and AgNPs showed obvious additive effect instead of synergistic effect against
A. alternata.
2.5. Residue of Silver in Jujube
The residual Ag
+ content in jujubes treated with CS-AgNPs gel was measured, revealing an increasing trend in the concentration of Ag
+ over time. The Ag
+ concentration peaked at a saturation level of approximately 0.34 mg/kg on the 10th day, as depicted in
Figure 7. It is inferred that when the Ag
+ residue concentration is at this level, it poses no health risks to humans according to the literature reference [
23].
3. Materials and Methods
3.1. Fruit Material and Chemical Material
Jujubes were purched from Aksu, Xinjiang, China. All fruits were free from mechanical damage or infection. The surface of the selected fruits was disinfected with 75% ethanol for 5 min, washed twice with sterile water and air-dried.
Low molecular weight chitosan (85% deacetylated) and agar powder (bacteriological grade) were procured from Sigma-Aldrich, USA. Silver nitrate (AgNO3, 99.8%; Energy), acetic acid (glacial, 99 100%; Sinopharm), sodium citrate (95%; Sinopharm) and sodium hydroxide (NaOH, Sinopharm) 4-nitrophenol (95%; Merck) were used as received without further purification. All other chemicals used in this study were of analytical grade.
3.2. Fungal Isolation, Identification, Culture and Spore Suspension
The procedure refers to previous literature [
23]. The procedure involved washing the jujubes affected by black spot disease with sterile water, collecting the filtrate, and diluting it. Subsequently, 100 μL of the diluted solution was evenly spread onto a petri dish containing potato dextrose agar (PDA) medium and incubated at 28
oC for 7 days. The fungal isolates were then purified through three rounds of subculturing on PDA.
The major isolates were obtained and characterized using macroscopic and microscopic observation methods.The isolated fungi were separately cultured on PDA at 28oC for 7 days. Spore suspensions were obtained by rinsing the cultures with sterile water containing 0.05% (v/v) Tween-80 and then adjusted to 1 × 109 CFU/L.
3.3. Characterization
UV-vis spectrum was recorded on Shimadzu UV-2550 spectrometer (Japan). Fourier transform infrared spectroscopy (FTIR) was carried out in Bruker EQUINOX-55 (Germany). Transmission electron microscopy (TEM) was taken using Hitachi H-600 (Japan) operated at 80 kV. Inductively coupled plasma-mass spectrometry (ICP-MS) was recorded on ThermoFisher iCAP Q (U.S.).
3.4. Preparation of CS-AgNPs Hydrogel
The 1 mL CS-AgNPs hydrogel was prepared by adding 100 μL 0.2 M NaOH to 800 μL 0.5 wt % CS solution (in 1 % acetic acid), followed by adding 100 μL freshly prepared 0.3 M AgNO3 solution with vigorous shaking for 2 seconds. The Critical Gelation Concentration (CGC) of the hydrogel was visually recognized by the reversed vial test method. Confirmation that in this case the CS-Ag complex systems have been obtained will be described below based on TEM, UV-vis and FTIR measurements.
3.5. Zone of Inhibition Test
All experimental operations are carried out in a clean workbench.
3.5.1. Preparation of Fungal Suspension
Pick up 3 needles of pathogenic fungi strains into the test tube containing 10 mL sterile water, and then shake the test tube well to make 10-1 fungi suspension.
3.5.2. Antibacterial Experimental Method
The research methodology adheres to the established protocols as described in previous literature [
23].
Preparation of bacteriostatic tablets: Prepare the qualitative filter paper into a circular paper with a diameter of 6 mm with a punch, then put these filter paper into an autoclave at 121oC for 20 min, then dry for later use. Immerse the sterilized and dried 6 mm filter paper disc into different bacteriostatic solutions.
Fungal inoculation: inoculate 500 µL fungil suspension on the culture medium, mix evenly, then cover the petri dish and dry it at room temperature for 5 min.
Put the filter paper that treated with antibacterial agent gently on the medium coated with bacteria by using sterilized tweezers, and put 3 pieces on each medium. The distance between the centers of each filter paper is more than 30 mm, and the distance from the edge of the petri dish is more than 20 mm. The filter paper was tightly attached to the medium, covered the petri dish was and placed at 28oC for 5 d observation
After pasting the filter paper, gently press the filter paper with tweezers to make it tightly adhere to the culture medium and cover the culture dish, place it in a 28oC incubator and culture for 5 days. Measure the diameter of the bacteriostatic circle with a vernier caliper and record the results.
3.6. Quantitative Assay of the Antimicrobial Activity
3.6.1. The Minimal Inhibitory Concentrations (MIC) and the Minima Bactericidal Concentrations (MBC)
The MIC and the MBC were determined by binary serial microdilution assay performed in 96-well microtiter plates. The sterile water was used for media, buffer preparation, and dilutions, physiological. Incubation for antibacterial assays was done in a shaker–incubator at 28oC.
In a 96-well plate setup, the first well was prepared with 100 µL of Potato Dextrose Agar (PDA) and 100 µL of LCS (or AgNO3) as a sterile control. Wells 2 through 11 received 95 µL of PDA, 50 µL of LCS (or AgNO3) antimicrobial agent, and 50 µL of bacterial suspension. Well 12 contained 195 µL of PDA and 5 µL of bacterial suspension. The concentration of chitosan (CS) ranged from 1000 mg/L down to the MIC and MBC values of 1.95 mg/L, while the concentration of AgNO3 ranged from 1000 mg/L to 1.95 mg/L. The plates were incubated at 28oC for 48 hours to monitor the growth and proliferation of Alternaria fungi, thereby establishing the lowest inhibitory concentration (MIC) and the lowest bactericidal concentration (MBC).
3.6.2. Fractional Inhibitory Concentration Index (FICI)
To assess the effects of chitosan (CS) and silver nanoparticles (AgNPs), the antimicrobial activity of a CS-AgNPs mixture with varying volume ratios was quantitatively evaluated using the MIC method. The MIC values of the individual components served as a baseline, from which the FICI was established during the MIC experiment. Subsequently, the FICI results were used to refine the effective concentration range for the synergistic action.
The values of FICI are interpreted as follows [
24] : synergistic (FICI≤0.5), additive (1≥FICI >0.5), indifferent (4≥FICI>1), antagonistic (FICI≥4).
3.7. Residue of Silver in Jujube
The research methodology adheres to the established protocols as described in previous literature [
23]. Rinse and dry the fresh dates, extract the edible portions after pitting, and blend them into a smooth puree. Weigh 3.0 g of the homogenized sample into a polytetrafluoroethylene digestion tank, then added 6 mL nitric acid and 1 mL hydrogen peroxide. After digestion completed, dilute the digestion solution to 50 mL with ultrapure water before testing. The blank experiments were conducted simultaneously. All of experiments were repeated three times. ICP-MS was used to detect Ag
+ residue in jujube after CS-AgNPs hydrogel preservation.
X — the silver content in sample (mg/kg);
c —determination value of silver in sample solution (ng/mL);
c0 —determination value of silver in sample blank solution (ng/mL);
V —constant volume of sample (mL);
f —dilution ratio of sample;
m —the weight of sample (g).
4. Conclusions
In this paper, the CS-Ag complex hydrogels were rapidly synthesized through physical crosslinking, exhibiting exceptional stability and long-term preservation at ambient temperature. The synthesized nanoparticles exhibited a quasi-spherical morphology, with an average diameter of 80 nm and displayed commendable monodispersity, as evidenced by TEM images. FTIR spectra confirmed the presence of polymer chains attached to the metallic surface. The CS-AgNPs gel demonstrated effective disease control in jujubes, exhibiting a strong inhibitory effect on the growth of A. alternata in vitro studies. The antibacterial performance of CS-Ag complex can be explained as a additive effect of chitosan and silver. CS serves a dual role by not only stabilizing Ag+ to avert oxidation and aggregation but also by converting Ag+ into AgNPs, which possess superior antimicrobial efficacy. This transformation significantly enhanced the antimicrobial capabilities of the CS-AgNPs gel. Antimicrobial assays revealed FICI values ranging from 0.52 to 0.97, indicating that CS and AgNPs exhibited a clear additive effect rather than a synergistic effect against A. alternata. Moreover, the application of CS-AgNPs Hydrogel not only enhances food safety by preventing fungal contamination but also ensures that no detectable residues remain after a simple water wash. This hydrogel thus improves the safety of jujubes and serves as a viable alternative to fungicides for controlling fungal diseases in fruit.
Author Contributions
W. H. and X. W. contributed equally; Conceptualization, L. T., W. Z., Z. L., D. X, Y. Z. and P. X.; investigation, Y.Z.; writing—original draft preparation, W. H., X. W., and L. T.; data curation, X. W., Q. S., and X. W.; writing—review and editing, Y. Z. and P. X.; All authors have read and agreed to the published version of the manuscript.
Funding
This work was supported by the Project of Renovation Capacity Building for the Young Sci-Tech Talents Sponsored by Xinjiang Academy of Agricultural Sciences (No. xjnkq-2019015).
Data Availability Statement
The data presented in this study are available on request from the corresponding author.
Acknowledgments
The authors thank the Key Laboratory of Xinjiang Uygur Autonomous Region Open Project (No. 2017D04015.) and Dr. Tianchi Program of the Autonomous Region..
Conflicts of Interest
The authors declare no conflict of interest.
References
- Solfrizzo, M. , Recent advances on Alternaria mycotoxins. Curr. Opin. Food Sci. 2017, 17, 57–61. [Google Scholar] [CrossRef]
- Chang, W.; Liu, F.; Sharif, H. R.; Huang, Z.; Goff, H. D.; Zhong, F. , Preparation of chitosan films by neutralization for improving their preservation effects on chilled meat. Food Hydrocolloid. 2019, 90, 50–61. [Google Scholar] [CrossRef]
- Zhao, J.; Wang, Y.; Li, J.; Lei, H.; Zhen, X.; Gou, D.; Liu, T. , Preparation of chitosan/Enoki mushroom foot polysaccharide composite cling film and its application in blueberry preservation. Int. J. Biol. Macromol. 2023, 246, 125567. [Google Scholar] [CrossRef] [PubMed]
- Liu, Y.; Liu, Q.; Li, X.; Hu, T.; Jatt, A.-N.; Zhang, C.; Gong, H. , Effects of postharvest chitosan and potassium sorbate coating on the storage quality and fungal community of fresh jujube. Postharvest Biol. Tec. 2023, 205, 112503. [Google Scholar] [CrossRef]
- Cheng, S.; Yu, Y.; Guo, J.; Chen, G.; Guo, M. , Effect of 1-methylcyclopropene and chitosan treatment on the storage quality of jujube fruit and its related enzyme activities. Sci. Hortic-amsterdam. 2020, 265, 109281. [Google Scholar] [CrossRef]
- Zhang, C.; Gong, H.; Liu, Y. , Effects of postharvest coating using chitosan combined with natamycin on physicochemical and microbial properties of sweet cherry during cold storage. Int. J. Biol. Macromol. 2022, 214, 1–9. [Google Scholar] [CrossRef]
- Dong, Z.; Li, R.; Gong, Y. , Antibacterial and Freshness-Preserving Mechanisms of Chitosan-Nano-TiO2-Nano-Ag Composite Materials. Coatings 2021, 11, 914. [Google Scholar] [CrossRef]
- García-García, D. J.; Pérez-Sánchez, G. F.; Hernández-Cocoletzi, H.; Sánchez-Arzubide, M. G.; Luna-Guevara, M. L.; Rubio-Rosas, E.; Krishnamoorthy, R.; Morán-Raya, C. , Chitosan Coatings Modified with Nanostructured ZnO for the Preservation of Strawberries. Polymers 2023, 15, 3772. [Google Scholar] [CrossRef] [PubMed]
- Mousazadeh, S.; Ehsani, A.; Moghaddas Kia, E.; Ghasempour, Z. , Zinc oxide nanoparticles and periodate oxidation in developing pH-sensitive packaging film based on modified gelatin. Food Packaging Shelf. 2021, 28, 100654. [Google Scholar] [CrossRef]
- Cheng, J.; Lin, X.; Wu, X.; Liu, Q.; Wan, S.; Zhang, Y. , Preparation of a multifunctional silver nanoparticles polylactic acid food packaging film using mango peel extract. International J. Biol. Macromol. 2021, 188, 678–688. [Google Scholar] [CrossRef]
- Kumar, S.; Shukla, A.; Baul, P. P.; Mitra, A.; Halder, D. , Biodegradable hybrid nanocomposites of chitosan/gelatin and silver nanoparticles for active food packaging applications. Food Packaging Shelf. 2018, 16, 178–184. [Google Scholar] [CrossRef]
- Zhang, Y.; Lin, Z.; He, Q.; Deng, Y.; Wei, F.; Xu, C.; Fu, L.; Lin, B. , Enhanced aqueous stability and long-acting antibacterial of silver-based MOFs via chitosan-crosslinked for fruit fresh-keeping. Appl. Surf. Sci. 2022, 571, 151351. [Google Scholar] [CrossRef]
- Saravanakumar, K.; Sathiyaseelan, A.; Mariadoss, A. V. A.; Xiaowen, H.; Wang, M.-H. , Physical and bioactivities of biopolymeric films incorporated with cellulose, sodium alginate and copper oxide nanoparticles for food packaging application. Int. J. Biol. Macromol. 2020, 153, 207–214. [Google Scholar] [CrossRef] [PubMed]
- Madian, N. G.; Mohamed, N. , Enhancement of the dynamic mechanical properties of chitosan thin films by crosslinking with greenly synthesized silver nanoparticles. J. Mater. Res. Technol. 2020, 9, 12970–12975. [Google Scholar] [CrossRef]
- Huynh, M. D.; Linh, N. T. D.; Chinh, N. T.; Trang, N. T. T.; Manh, V. Q.; Linh, N. N.; Thang, D. X.; Anh, N. T. L.; Nam, N. T.; Giang, N. V.; Trung, V. Q. , Preparation of preservative coating for tomatoes based on polyphenol modified chitosan and silver nanoparticles. Vietnam J. Chem. 2022, 60, 86–95. [Google Scholar] [CrossRef]
- Mouzahim, M. E.; Eddarai, E. M.; Eladaoui, S.; Guenbour, A.; Bellaouchou, A.; Zarrouk, A.; Boussen, R. , Effect of Kaolin clay and Ficus carica mediated silver nanoparticles on chitosan food packaging film for fresh apple slice preservation. Food Chem. 2023, 410, 135470. [Google Scholar] [CrossRef] [PubMed]
- Dananjaya, S. H. S.; Kulatunga, D. C. M.; Godahewa, G. I.; Lee, J.; De Zoysa, M. , Comparative study of preparation, characterization and anticandidal activities of a chitosan silver nanocomposite (CAgNC) compared with low molecular weight chitosan (LMW-chitosan). RSC Advances 2016, 6, 33455–33461. [Google Scholar] [CrossRef]
- Ji, M.; Li, J.; Li, F.; Wang, X.; Man, J.; Li, J.; Zhang, C.; Peng, S. , A biodegradable chitosan-based composite film reinforced by ramie fibre and lignin for food packaging. Carbohyd. Polym. 2022, 281, 119078. [Google Scholar] [CrossRef]
- Das, B.; Dash, S. K.; Mandal, D.; Ghosh, T.; Chattopadhyay, S.; Tripathy, S.; Das, S.; Dey, S. K.; Das, D.; Roy, S. , Green synthesized silver nanoparticles destroy multidrug resistant bacteria via reactive oxygen species mediated membrane damage. Arab. J. Chem. 2017, 10, 862–876. [Google Scholar] [CrossRef]
- Zhou, P.; Xia, Z.; Qi, C.; He, M.; Yu, T.; Shi, L. , Construction of chitosan/Ag nanocomposite sponges and their properties. Int. J. Biol. Macromol. 2021, 192, 272–277. [Google Scholar] [CrossRef]
- Zhang, Z.; He, T.; Yuan, M.; Shen, R.; Deng, L.; Yi, L.; Sun, Z.; Zhang, Y. , The in situ synthesis of Ag/amino acid biopolymer hydrogels as mouldable wound dressings. Chem. Commun. 2015, 51, 15862–15865. [Google Scholar] [CrossRef] [PubMed]
- Sun, Z.; Lv, F.; Cao, L.; Liu, L.; Zhang, Y.; Lu, Z. , Multistimuli-Responsive, Moldable Supramolecular Hydrogels Cross-Linked by Ultrafast Complexation of Metal Ions and Biopolymers. Angew. Chem. Int. Ed. 2015, 54, 7944–7948. [Google Scholar] [CrossRef] [PubMed]
- He, W.; Zhu, Y.; Chen, Y.; Shen, Q.; Hua, Z.; Wang, X.; Xue, P. , Inhibitory Effect and Mechanism of Chitosan–Ag Complex Hydrogel on Fungal Disease in Grape. Molecules 2022, 27, 1688. [Google Scholar] [CrossRef] [PubMed]
- Balouiri, M.; Sadiki, M.; Ibnsouda, S. K. , Methods for in vitro evaluating antimicrobial activity: A review. J. Pharm. Anal. 2016, 6, 71–79. [Google Scholar] [CrossRef]
|
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).