LPR-ZM
Monitoring and regulation module for the single RF light point with Zhaga MINI connector
LPR-Z Mini: Node suitable for dimming and monitoring of Public lighting plants.
It’s equipped with an integrated antenna, in a Lumawise Tyco IP66 case, the node is installed outside the luminaire with a 4 pin Zhaga connector.
It’s Suitable for LED luminaires with Standard Zhaga digital addressable lighting interface 2.0 Full dimmable driver.
As others Opera modules, it is able to perform telemetry, remote diagnostics and remote control of the device. In a Lumawise case, it can be combined with luminaries equipped with a dimmable electronic power supply Zhaga 1.0 standard-compliant.
It has an embedded digital luxmeter with a 0.1 Lux resolution and a temperature probe.
The communication technology is RF 868 Mhz LoRa or 2.4 GHz IEE 802.15.4; the protocol is RV3, with AES128 encryption. The driver control is made with digital addressable lighting interface 2.0 Full bus. The maximum communication range in open field is about 5.000 mt.
The communication system is a Mesh RV3 open type in both directions, without any HOP restriction, suitable to manage 400 devices on the same radio (expandable up to 980 after technical verification by Revetec), developed to simplify the commissioning without pre-configuration of the radio network.
Available options: astronomic clock and twilight switch.
The working modes are:
- ON – OFF – DIM
- ON – OFF – STANDALONE with an integrated astronomic clock
- ON – OFF with hysteresis and luminance thresholds
- DIM with virtual midnight