If you are looking to convert your GY6 Honda Ruckus to 150cc, it all starts here. This motor can also be used as a replacement to your stock 150cc Chinese scooter or go-kart engine. This engine is equipped with a 11 pole stator and performance brake shoes. This is a 54mm stud spacing A Block. To put this motor into perspective, the stock 50cc Honda Ruckus (GET motor) puts out roughly 2.5hp. This GY6 engine puts out 8hp; almost three times the power! Although this engine comes with a light coat of shipping oil, you will need to drain and fill with fresh oil.
This engine is shipped somewhat dry. DO NOT RUN THE ENGINE WITHOUT ADDING FRESH OIL AND REMOVING THE SHIPPING OIL.
Check the oil level after letting the engine idle for a few minutes, and add additional oil if needed.
