GY6 Ruckus Wiring Harness (20 Min Install)

Here we have the Ruckus GY6 swap adapter harness. This is a complete wiring solution with nothing extra to purchase; 100% plug & play (meaning no crimping or splicing wires, truly plug & play). No electrical know how is required. This harness will allow you to use all of your original controls (or aftermarket), Honda wiring harness and Honda fuel pump (very important for reliability, stay away from the vacuum style fuel pump). With the Rolling Wrench GY6 Ruckus swap harness, you will have your Ruckus running on a GY6 150cc-232cc in around 20 min. No splicing, cutting or soldering of any kind. Follow our step by step install video. We use all Honda original connectors.

This is the most reliable way to run a GY6 in a Honda Ruckus. Not to mention, everything comes in the kit! Most GY6 wiring harnesses on the market are literally made with the same components found in a Maddog Chuckus (Chinese made clone of the Ruckus), meaning they use the unreliable vacuum operated fuel pump, an extremely cheap CDI and ignition coil found in Chinese scooters (with the unreliable ice cube relay). But not ours! Our harness utilizes the factory Honda reliable ECU, fuel pump and main wiring. Why down-grade your Ruckus to Chuckus components? No need to add any more parts to the kit to make it complete.

You will get it all:

- 18 Pole Stator & flywheel

-Flywheel Puller (to install the new stator)
- Rolling Wrench Micro Processor CDI Box w/ Ignition Coil (performance 32k volt, no rev limit) - made in Taiwan not China
- Starter Solenoid w/ Rubber Protection Cover
- OEM to GY6 CVK Choke Adapter Plug
- 8 Gauge Starter Wire
- 8 Gauge Ground Wire

NO EXTRAS TO BUY, THIS KIT COMES WITH EVERYTHING TO WIRE UP YOUR RUCKUS TO RUN THE GY6 ENGINE! Be sure your original Ruckus harness is complete for this to function properly with our GY6 swapped Ruckus harness.

Also, you must use the original fuel pump (who would want an after market vacuum pump anyways?). If your original pump is unplugged, it will not start with the electric start. A vacuum fuel pump only pumps fuel while the engine is cranking. The stock fuel pump starts pumping before the start button is even pushed. When you let your Ruckus sit for a few days, the fuel bleeds out of the fuel lines. The next time you try to start the Ruckus it cranks forever before it starts. This is the reason the stock fuel pump is a must!