• Premier manufacturing technology. The innovative mechanical design, combined with the use of an advanced manufacturing technology, results in a state-of-the-art 3-inch submersible pump line.
• Proven & Reliable Design For Critical Conditions.
• State of the art design: Delivers optimum performance and reliability in the toughest conditions.
• 130, 200, 250, 300, 380, 500, 600, 700, 800, 850, 1000 & 1100 LPM models feature independent centrifugal impellers to provide smooth starting and long life.
• Rubber & bronze bearing provide low friction and high wear resistance.
• Easy assembling, dismantling. Easily serviceable pump & field rewindable motors. Suction screen and coupling are made of stainless steel.
• Standard 2 pole speed motor (2900 RPM).
• Once assembled, each 6” borehole submersible pump is individually tested to assure performance within design specifications.
• Kiwi Pumps uses non-contaminating, water filled motor design.
• High pumping efficiency for reduced running costs.
• Cost effective pumping systems: The hydraulic design is such as to enhance the efficiency, thus reducing energy consumption and making pumping systems more cost effective.
• Light weight and compact.
• Lip seal and sand guard to prevent ingress of impurities into the motor.
• Maintenance and service: with time some parts subject to wear may need replacement.
• The simplicity of the assembly concept allows for easy field service without the need of special tools minimizing the system down-time.
• The MOTOR is of non-toxic cooling bath type; asynchronous with squirrel cage rotor. Suction and delivery casing are in cast iron and if required in stainless steel & brass. Impellers and diffusers are in Noryl homologated for drinkable water use and are equipped with stainless steel inserts in correspondence of the wearable zones.
• Discharge Bearing: Extra long sealed top bronze bearing insures shaft alignment and stabilization for extended life.
• Suction Adapter: Designed to ensure proper pump/ motor alignment. Open area permits easy access to pump/motor coupling. Casting made of ductile iron for increased strength.
• Pump Shaft: High tensile type 410 stainless steel provides strength and corrosion resistance. Ground and polished for smooth bearing surface.
• Powered for continuous operation: All horsepower ratings are within the service limits of the motor and pump can be operated continuously without fear of damage to the motor.
• Bearings with sand channels; all bearings are water lubricated and have a squared shape enabling sand particles, if any, to leave the pump together with the pumped liquid.
• The motor adapter, coupling, check value and discharge head may be removed without disassembling the hydraulic stack.

A combination of multistage centrifugal pumps and submersible motors, the 4″ borehole submersible pump, is designed for applications like:

• water supply.
• Housing complexes, bungalows.
• Gardens, farms and nurseries.