This document provides information on benzyl chloroformate, including its identification, hazards, composition, safe handling and storage instructions, toxicological properties, and regulatory information. Benzyl chloroformate is a clear, light yellow liquid with a pungent odor that is highly toxic and corrosive. It reacts violently with water and should be stored away from moisture and sources of ignition at temperatures between 2-8 degrees Celsius.
As said earlier, Gypsum occurs along with other minerals such as halite and anhydrite. These all are the evaporite minerals, and hence the gypsum. It means that Gypsum is the sedimentary deposit, that is to say, it is deposited by the action or the work of wind or the water, usually in the bottom of the water body. In particular, Sulfate is deposited from the natural brine that occurs in the ocean, which is then followed by anhydrite and halite
This document provides a safety data sheet for a dental lab gypsum product. The product is a powder used to fabricate dental prosthetics and contains over 95% plaster of Paris. It is not considered hazardous according to OSHA when used as intended. When mixed with water, it can become very hot and should not be used to encase any part of the body.
1. The document provides a material safety data sheet for eugenol, including information on its composition, hazards, safe handling and storage, exposure controls, physical properties, stability, toxicology, ecological impact, and regulatory information.
2. Eugenol is the main component at 100% concentration and has an oral LD50 of 1930 mg/kg in rats. It is a combustible liquid and irritant that requires protective equipment for handling.
3. The substance is toxic to lungs, nervous system and mucous membranes with potential chronic effects from repeated exposure including organ damage. It does not pose significant environmental hazards.
1) Acetone is a flammable liquid used as a solvent. It is 100% acetone by composition.
2) Acetone poses fire and health hazards and can irritate skin, eyes, and the respiratory system upon contact.
3) Proper handling of acetone requires protective equipment and ventilation and the material must be stored away from heat and ignition sources.
This document provides a material safety data sheet for hydrochloric acid. It lists hydrochloric acid as the main ingredient, with concentrations between 32-34%. The document outlines hazards like corrosiveness and toxicity upon contact with skin, eyes or inhalation. It provides first aid measures for different exposure routes. The document also covers storage, handling, physical properties, stability, disposal and transportation information for hydrochloric acid.
Sds resist 86 av - comp. b - marine protective - english (us) - united states택진 김
This document provides a material safety data sheet for Resist 86 AV - Comp. B, which contains zinc powder and zinc oxide. It is considered hazardous and may cause target organ damage based on animal data. Exposure can cause eye, skin, or respiratory irritation. Inhalation of dusts or fumes can potentially damage lungs or the upper respiratory tract over time. The product contains 50-100% zinc and 2.5-10% zinc oxide and is very toxic to aquatic life with potential long term effects in aquatic environments. Proper personal protective equipment should be used when handling.
Pigment yellow 138 cas 30125 47-4 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:[email protected]
Pigment orange 71 cas 84632 50-8 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:[email protected]
Energol ic-hfx-404-9389 Liên hệ: Mr Tùng 0987 988 407 website: www.khodaumo.comĐỗ Bá Tùng
This safety data sheet provides information on Energol IC-HF X 404 engine oil. It contains no hazardous ingredients above regulated thresholds. Prolonged skin contact may cause irritation. Used engine oil may contain carcinogens. If contact occurs, wash skin and eyes thoroughly. Store in a dry, well-ventilated area away from heat and sunlight. In a fire, this product may decompose and produce carbon oxides, sulfur oxides and metal oxides. Dispose of waste via licensed contractor and in accordance with local regulations to prevent environmental contamination.
Website: https://www.customtintsolutions.com/cities/austin/
Custom Tint Solutions Window Film Austin.
This file is from Austin, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Custom Tint Solutions hopes you enjoy.
This document provides a material safety data sheet for methyl alcohol (methanol). It lists methanol's chemical and physical properties, potential health hazards, exposure limits, precautions for safe handling and storage, accidental spill measures, toxicological information, and regulatory information. Methanol is a colorless, flammable liquid with an alcohol-like odor. It is a simple asphyxiant that can cause blindness and death if ingested or inhaled in high concentrations.
Chemicals can enter the body through inhalation, absorption, or ingestion and cause both acute and chronic health effects depending on the substance. Material safety data sheets provide important information on chemical hazards, including health effects, safe handling and storage procedures, personal protective equipment requirements, and emergency response. It is important to properly assess chemical risks, identify necessary controls, use appropriate PPE, handle chemicals safely, and ensure worker health is monitored to minimize exposure to hazardous materials.
Pigment violet 23 permanent violet rl cas 6358 30-1 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:[email protected]
This document provides a safety data sheet for Pigment Green 50, an inorganic pigment. It identifies hazards such as skin sensitization, carcinogenicity, and specific target organ toxicity from repeated inhalation exposure. It provides details on product identification, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, and disposal considerations.
Energol rc-4997 Liên hệ: Mr Tùng 0987 988 407 website: www.khodaumo.comĐỗ Bá Tùng
1. Energol RC 100 is a compressor lubricant produced by Castrol BP Petco Ltd. for specific industrial applications.
2. The product contains highly refined base oils and proprietary additives. It is not classified as hazardous and does not contain any ingredients above regulated thresholds.
3. Prolonged or repeated skin contact can cause defatting of the skin and irritation. The product should not be used in compressors producing breathable air.
This document provides safety information for Brown Mahogany Wood Stain. It is a water-based wood stain containing less than 3% propane-1,2-diol as an ingredient. The stain does not meet the criteria to be classified as hazardous. Precautions include wearing proper protective equipment and ensuring good ventilation when using the product.
This material safety data sheet provides information on the chemical 2,4-Toluene diisocyanate and 2,6-Toluene diisocyanate. It is a clear, colorless to slightly yellow liquid with a pungent odor. It is extremely hazardous if ingested or inhaled and can cause damage to lungs, nerves, liver and other organs upon exposure. Personal protective equipment including gloves, eye protection and respirators are required when handling.
This document provides a material safety data sheet for sodium chloride. It lists the company details, product identification, hazards, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, transport information, regulatory information, and a contact point. Sodium chloride is not hazardous according to European directives, does not require protective equipment during normal handling, and is stable under normal conditions.
Cisplatin is a chemotherapy drug that can be toxic if swallowed or absorbed through the skin and cause serious eye damage. It may cause cancer and is fatal in high doses. Personal protective equipment should be worn when handling it, including gloves, eye protection and protective clothing. Cisplatin poses environmental hazards and should be disposed of properly according to local regulations.
This document provides an overview of chemical hazards and safety. It discusses the classification of workplace hazards including physical, chemical, biological and ergonomic. It defines key terms like flash point, auto ignition temperature, threshold limit values and IDLH. It describes routes of chemical entry, health effects of chemicals on different organs, and carcinogens. The document provides guidance on personal protective equipment, respiratory protection, and controlling chemical exposure through engineering controls, hygiene and proper storage. It emphasizes the importance of material safety data sheets and following standard operating procedures to safely handle chemicals.
Safety In Storage / handling / Transportation Of Chemicals. By Bimal Chandra...Bimal Chandra Das
The document provides guidelines for safely storing, handling, transporting, and loading/unloading chemicals, including constructing storage tanks with proper foundations and markings, keeping incompatible chemicals separated, using personal protective equipment, affixing labels to vehicles, and ensuring operators and drivers are trained in chemical hazards.
1) Several corrosive and hazardous chemicals used in industrial plants are discussed, including sulfuric acid, hydrochloric acid, caustic soda, ammonia, chlorine, and hydrazine.
2) The document provides information on the properties and health effects of these chemicals and stresses the importance of safety precautions like protective equipment, ventilation, and emergency response plans when handling them.
3) First aid measures are outlined for exposure to these chemicals through inhalation, skin contact, and eye contact and include irrigation, oxygen administration, and calling for emergency help.
This document provides an overview of chemical safety concepts including toxicity, hazards, safe handling and storage of chemicals, disposal of chemicals, and emergency procedures. It discusses key topics such as permissible exposure limits, standard operating procedures, material safety data sheets, physical and health hazards of chemicals, routes of exposure, personal protective equipment, flammability classifications, signs and symptoms of exposure, and emergency response. The document emphasizes the importance of planning, training, labeling, using proper handling techniques and protective equipment, and knowing emergency procedures in order to safely use and dispose of chemicals.
This document provides a safety data sheet for a wood sealer product called BEYE QT 6 PK SEALCOAT UNIV SANDING. It lists the product's ingredients as 50-75% ethanol and 2.5-10% 2-propanol. The document outlines handling, storage, exposure, and disposal safety precautions. It indicates the product is extremely flammable and can cause eye, skin, and respiratory irritation upon contact.
This document summarizes the properties and safety information for Road Bio, an aqueous cleaning agent used to remove oil spills. It can be used neat or diluted and poses minimal health risks if proper precautions are followed. The product contains sodium hydroxide and other components that are irritants but not classified as hazardous below certain concentrations. It is biodegradable and not considered toxic to the environment in recommended use.
1. Levetiracetam is a chemical substance with CAS number 102767-28-2 that is used as a laboratory chemical and in manufacturing.
2. It is classified as harmful if swallowed and causes eye irritation. Personal protective equipment should be worn when handling.
3. The chemical is a solid with no available data on its physical and chemical properties. It is toxic if inhaled or swallowed and may cause skin or eye irritation on contact.
This document provides a material safety data sheet for Sobo Gold, a water soluble degreaser and cleaner concentrate. It lists the product description and properties, identifies hazards such as eye and skin irritation, and outlines first aid measures. The document also provides information on the product's composition, handling, storage, exposure controls, physical properties, stability, ecotoxicity, disposal, and regulatory compliance. Sobo Gold is a readily biodegradable product that poses minimal risks to health or the environment when used as directed.
This document summarizes information from a material safety data sheet (MSDS) for (R)-tert-Butylsulfinamide (cas 196929-78-9). It provides the chemical's synonyms, hazards, physical properties, handling instructions, and regulatory information. The chemical may cause eye or skin irritation upon contact and respiratory irritation if inhaled. Proper personal protective equipment should be worn when handling it.
This document provides information on the chemical compound d-(-)-alpha-phenylglycine, including its identification, properties, hazards, safe handling and storage guidelines, exposure controls, transport information, and regulatory details. It identifies the compound as a crystalline powder with no reported odor that may cause irritation upon contact with eyes, skin or if ingested. Proper personal protective equipment is recommended when handling the compound.
Energol ic-hfx-404-9389 Liên hệ: Mr Tùng 0987 988 407 website: www.khodaumo.comĐỗ Bá Tùng
This safety data sheet provides information on Energol IC-HF X 404 engine oil. It contains no hazardous ingredients above regulated thresholds. Prolonged skin contact may cause irritation. Used engine oil may contain carcinogens. If contact occurs, wash skin and eyes thoroughly. Store in a dry, well-ventilated area away from heat and sunlight. In a fire, this product may decompose and produce carbon oxides, sulfur oxides and metal oxides. Dispose of waste via licensed contractor and in accordance with local regulations to prevent environmental contamination.
Website: https://www.customtintsolutions.com/cities/austin/
Custom Tint Solutions Window Film Austin.
This file is from Austin, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Custom Tint Solutions hopes you enjoy.
This document provides a material safety data sheet for methyl alcohol (methanol). It lists methanol's chemical and physical properties, potential health hazards, exposure limits, precautions for safe handling and storage, accidental spill measures, toxicological information, and regulatory information. Methanol is a colorless, flammable liquid with an alcohol-like odor. It is a simple asphyxiant that can cause blindness and death if ingested or inhaled in high concentrations.
Chemicals can enter the body through inhalation, absorption, or ingestion and cause both acute and chronic health effects depending on the substance. Material safety data sheets provide important information on chemical hazards, including health effects, safe handling and storage procedures, personal protective equipment requirements, and emergency response. It is important to properly assess chemical risks, identify necessary controls, use appropriate PPE, handle chemicals safely, and ensure worker health is monitored to minimize exposure to hazardous materials.
Pigment violet 23 permanent violet rl cas 6358 30-1 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:[email protected]
This document provides a safety data sheet for Pigment Green 50, an inorganic pigment. It identifies hazards such as skin sensitization, carcinogenicity, and specific target organ toxicity from repeated inhalation exposure. It provides details on product identification, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, and disposal considerations.
Energol rc-4997 Liên hệ: Mr Tùng 0987 988 407 website: www.khodaumo.comĐỗ Bá Tùng
1. Energol RC 100 is a compressor lubricant produced by Castrol BP Petco Ltd. for specific industrial applications.
2. The product contains highly refined base oils and proprietary additives. It is not classified as hazardous and does not contain any ingredients above regulated thresholds.
3. Prolonged or repeated skin contact can cause defatting of the skin and irritation. The product should not be used in compressors producing breathable air.
This document provides safety information for Brown Mahogany Wood Stain. It is a water-based wood stain containing less than 3% propane-1,2-diol as an ingredient. The stain does not meet the criteria to be classified as hazardous. Precautions include wearing proper protective equipment and ensuring good ventilation when using the product.
This material safety data sheet provides information on the chemical 2,4-Toluene diisocyanate and 2,6-Toluene diisocyanate. It is a clear, colorless to slightly yellow liquid with a pungent odor. It is extremely hazardous if ingested or inhaled and can cause damage to lungs, nerves, liver and other organs upon exposure. Personal protective equipment including gloves, eye protection and respirators are required when handling.
This document provides a material safety data sheet for sodium chloride. It lists the company details, product identification, hazards, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, transport information, regulatory information, and a contact point. Sodium chloride is not hazardous according to European directives, does not require protective equipment during normal handling, and is stable under normal conditions.
Cisplatin is a chemotherapy drug that can be toxic if swallowed or absorbed through the skin and cause serious eye damage. It may cause cancer and is fatal in high doses. Personal protective equipment should be worn when handling it, including gloves, eye protection and protective clothing. Cisplatin poses environmental hazards and should be disposed of properly according to local regulations.
This document provides an overview of chemical hazards and safety. It discusses the classification of workplace hazards including physical, chemical, biological and ergonomic. It defines key terms like flash point, auto ignition temperature, threshold limit values and IDLH. It describes routes of chemical entry, health effects of chemicals on different organs, and carcinogens. The document provides guidance on personal protective equipment, respiratory protection, and controlling chemical exposure through engineering controls, hygiene and proper storage. It emphasizes the importance of material safety data sheets and following standard operating procedures to safely handle chemicals.
Safety In Storage / handling / Transportation Of Chemicals. By Bimal Chandra...Bimal Chandra Das
The document provides guidelines for safely storing, handling, transporting, and loading/unloading chemicals, including constructing storage tanks with proper foundations and markings, keeping incompatible chemicals separated, using personal protective equipment, affixing labels to vehicles, and ensuring operators and drivers are trained in chemical hazards.
1) Several corrosive and hazardous chemicals used in industrial plants are discussed, including sulfuric acid, hydrochloric acid, caustic soda, ammonia, chlorine, and hydrazine.
2) The document provides information on the properties and health effects of these chemicals and stresses the importance of safety precautions like protective equipment, ventilation, and emergency response plans when handling them.
3) First aid measures are outlined for exposure to these chemicals through inhalation, skin contact, and eye contact and include irrigation, oxygen administration, and calling for emergency help.
This document provides an overview of chemical safety concepts including toxicity, hazards, safe handling and storage of chemicals, disposal of chemicals, and emergency procedures. It discusses key topics such as permissible exposure limits, standard operating procedures, material safety data sheets, physical and health hazards of chemicals, routes of exposure, personal protective equipment, flammability classifications, signs and symptoms of exposure, and emergency response. The document emphasizes the importance of planning, training, labeling, using proper handling techniques and protective equipment, and knowing emergency procedures in order to safely use and dispose of chemicals.
This document provides a safety data sheet for a wood sealer product called BEYE QT 6 PK SEALCOAT UNIV SANDING. It lists the product's ingredients as 50-75% ethanol and 2.5-10% 2-propanol. The document outlines handling, storage, exposure, and disposal safety precautions. It indicates the product is extremely flammable and can cause eye, skin, and respiratory irritation upon contact.
This document summarizes the properties and safety information for Road Bio, an aqueous cleaning agent used to remove oil spills. It can be used neat or diluted and poses minimal health risks if proper precautions are followed. The product contains sodium hydroxide and other components that are irritants but not classified as hazardous below certain concentrations. It is biodegradable and not considered toxic to the environment in recommended use.
1. Levetiracetam is a chemical substance with CAS number 102767-28-2 that is used as a laboratory chemical and in manufacturing.
2. It is classified as harmful if swallowed and causes eye irritation. Personal protective equipment should be worn when handling.
3. The chemical is a solid with no available data on its physical and chemical properties. It is toxic if inhaled or swallowed and may cause skin or eye irritation on contact.
This document provides a material safety data sheet for Sobo Gold, a water soluble degreaser and cleaner concentrate. It lists the product description and properties, identifies hazards such as eye and skin irritation, and outlines first aid measures. The document also provides information on the product's composition, handling, storage, exposure controls, physical properties, stability, ecotoxicity, disposal, and regulatory compliance. Sobo Gold is a readily biodegradable product that poses minimal risks to health or the environment when used as directed.
This document summarizes information from a material safety data sheet (MSDS) for (R)-tert-Butylsulfinamide (cas 196929-78-9). It provides the chemical's synonyms, hazards, physical properties, handling instructions, and regulatory information. The chemical may cause eye or skin irritation upon contact and respiratory irritation if inhaled. Proper personal protective equipment should be worn when handling it.
This document provides information on the chemical compound d-(-)-alpha-phenylglycine, including its identification, properties, hazards, safe handling and storage guidelines, exposure controls, transport information, and regulatory details. It identifies the compound as a crystalline powder with no reported odor that may cause irritation upon contact with eyes, skin or if ingested. Proper personal protective equipment is recommended when handling the compound.
Click http://www.guidechem.com/cas-597/59729-33-8.html for suppliers of 5-Isobenzofurancarbonitrile,1-[3-(dimethylamino)propyl]-1-(4-fluorophenyl)-1,3-dihydro- (cas 59729-33-8). The document provides a material safety data sheet that identifies the product, lists hazards such as being harmful if swallowed, and provides handling and storage guidelines.
This document summarizes information about (R)-(-)-Mandelic acid including its suppliers, synonyms, hazards, first aid measures, fire fighting measures, accidental release measures, handling and storage, exposure controls, physical/chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, transport information, and regulatory information.
This document provides information on the chemical Clorsulon (cas 60200-06-8) including its identification, hazards, composition, safe handling and storage, first aid measures, and more. Clorsulon is not classified as hazardous but proper protective equipment should still be worn when handling it. The product is a white solid with no identified health hazards at normal exposure levels.
This document provides a material safety data sheet for dipyridamole (CAS 58-32-2). It lists dipyridamole's hazards, including skin and eye irritation, and recommends protective equipment when handling. The document describes dipyridamole's physical properties, toxicity, and disposal considerations. It contains safety information for transportation and regulatory compliance.
This document provides information on the chemical 2-Bromo-5-fluorotoluene (CAS 452-63-1) including its hazards, safe handling and storage, and physical properties. It identifies the chemical as flammable and an irritant to eyes, skin, and respiratory system. Personal protective equipment including gloves, protective clothing, and eye protection are recommended when handling it. The chemical has a flash point of 45°C and should be stored away from ignition sources in a cool, well-ventilated area.
This document provides information on the chemical 4-Fluorobenzoic acid (CAS 456-22-4) including its identification, hazards, composition, safe handling and storage, exposure controls, physical and chemical properties, toxicity, ecological information, and disposal considerations. It identifies the chemical as harmful if swallowed, causing serious eye damage. Personal protective equipment including gloves, face protection and eye protection are recommended when handling the chemical.
1) This document provides information on the product Amikacin disulfate salt (CAS 39831-55-5), including its identification, hazards, composition, safe handling and storage, exposure controls, physical and chemical properties, toxicity, ecological information, disposal considerations, and regulatory information.
2) Amikacin disulfate salt is not classified as hazardous but aminoglycosides like it are associated with significant nephrotoxicity and ototoxicity.
3) The product should be stored in a cool, well-ventilated place between 2-8 degrees Celsius and handled with gloves and eye protection to avoid dust inhalation or skin/eye contact.
This document provides information on the hazards and safe handling of 3-Methoxyphenylboronic acid. It lists the product as harmful if swallowed, causing skin and eye irritation as well as respiratory irritation. The document provides details on composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical/chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations and regulatory information.
This document provides suppliers and safety information for diethylamine (cas 109-89-7), including its identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, and toxicological information. It identifies diethylamine as a flammable liquid and vapor that is harmful if inhaled, swallowed, or absorbed through the skin, and causes severe skin burns and eye damage.
This document provides information on the chemical 4-Fluorobenzoyl chloride (CAS 403-43-0) including its identification, hazards, composition, safe handling and storage, exposure controls, physical and chemical properties, toxicity, ecological information, disposal considerations, and transportation. It identifies 4-Fluorobenzoyl chloride as a skin and eye irritant that can cause severe burns, and lists requirements for proper personal protective equipment when handling.
This safety data sheet provides information on Jet Fuel. It lists the product name and synonyms, recommended and advised against uses, hazards identified, composition including hazardous components, and first aid measures. The document also includes sections on firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, and other information.
1) This document provides information on the chemical Tolterodine tartrate (CAS 124937-52-6) including its identification, hazards, composition, safe handling and storage recommendations, and regulatory information.
2) Tolterodine tartrate is toxic if swallowed and suspected of damaging fertility or the unborn child. Personal protective equipment should be worn when handling it.
3) The substance is a white solid and its main hazards are acute toxicity if swallowed and reproductive toxicity. Proper precautions should be taken to prevent exposure.
This document provides a material safety data sheet for 1,3-dimethoxybenzene (CAS 151-10-0), including its identification, hazards, composition, safe handling and storage, exposure controls, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, and regulatory information. The document contains no hazard classifications for the substance and states it is not classified as dangerous.
Calcitonin (salmon) is a laboratory chemical that is toxic if swallowed. It can cause respiratory tract irritation if inhaled or skin irritation if absorbed through skin. Personal protective equipment should be worn when handling this chemical, including a face shield, gloves, and protective clothing. If exposed, flush affected areas with water and seek medical attention. The chemical is classified as toxic and should be disposed of properly.
Valeo Braking Systems Hydraulic Mineral Fluid LHM standard material safety da...Hugo Vallet
Valeo Braking Systems Hydraulic Mineral Fluid LHM standard material safety data sheet 402410 402411
SAFETY DATA SHEET in accordance with Regulation (EC) No 1907/2006 and Regulation (CE) N. 453/2010.
- trade name: BRAKE FLUID LHM
- use of the substance/preparation: Functional fluids (brake fluid) for automobile industry.
- identification of the company: Valeo Service UK LTD
Heming Road - Washford - Redditch – Worcs B98 ODZ - England
- Website: www.valeoservice.co.uk
- Emergency telephone number: 844 892 0111 (24 hrs)
Learn more about Valeo Multi-Specialist DNA on www.valeoservice.co.uk
Valeo, automotive technology, naturally
This document provides information on the chemical compound cyclopropyl methyl ketone (CAS # 765-43-5), including its identification, hazards, composition, safe handling and storage, exposure controls, physical and chemical properties, and toxicity. It identifies the compound as highly flammable and lists precautions such as keeping it away from heat, sparks, and flames.
This document provides information on bromomethylcyclopropane, including its identification, hazards, composition, safe handling and storage, exposure controls, physical and chemical properties, and toxicity. It identifies bromomethylcyclopropane as flammable and lists precautions such as avoiding inhalation of vapors and keeping it away from ignition sources. Personal protective equipment like gloves and eye protection are recommended when handling it.
Uv 531 chimassorb 81 cas 1843 05-6 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:[email protected]
Caustic Soda Flakes Manufacturers In Dubai | Prakash Chemicals Internationalanshparmar
Prakash Chemicals International is one of the leading manufacturers of caustic soda flakes chemical. To know more about caustic soda flakes, visit our website today.
The document is a safety data sheet for Premise 200SC Termiticide. It provides information on product identification, hazards, composition, first aid measures, handling and storage, exposure controls and personal protection, physical properties, stability, toxicological information and ecological information. The product contains the active ingredient Imidacloprid and is classified as harmful if swallowed and very toxic to aquatic life with long lasting effects. Personal protective equipment including gloves and goggles should be worn when handling the product.
This document provides information on the chemical 3,4,5-Trimethoxybenzoic acid (CAS 118-41-2) including its identification, hazards, composition, safe handling and storage, exposure controls, physical and chemical properties, and toxicological information. It lists this chemical as a skin and eye irritant that may cause respiratory irritation. Proper protective equipment is recommended when handling this product.
This safety data sheet provides information on the hazards and safe handling guidelines for methanol. Methanol is highly flammable and toxic if swallowed, inhaled, or absorbed through the skin. Exposure can damage organs like the eyes and central nervous system. The document lists protective equipment requirements and exposure limit values. It also provides first aid measures in case of accidental exposure and instructions for safe storage and handling of the chemical.
Diethylenetriaminepenta(methylene-phosphonic acid) (cas 15827-60-8) is an irritant that causes skin, eye and respiratory irritation. It is sold as a solution and should be handled with gloves and eye protection. The document provides identification information, hazards, composition, first aid measures, handling and storage guidance.
1) This document provides information on the product 1,4-butanediol, including its identification, hazards, composition, and safety guidelines for handling.
2) It is classified as harmful if swallowed and may cause drowsiness or dizziness if inhaled.
3) Proper personal protective equipment should be worn when handling this product, including gloves, eye protection, and breathing equipment.
- Nitrous oxide is a liquefied gas that is classified as an oxidizing gas and gas under pressure.
- It requires proper storage and handling to prevent contact with combustible or reducing materials.
- Adverse health effects include central nervous system impairment and hematologic effects with overexposure.
This document provides a material safety data sheet for 2-Cyanoacetamide (CAS 107-91-5). It identifies the product and company details, lists the product's hazards and contains information on its safe handling, storage, exposure controls, accidental release measures, toxicological information and regulatory details. The key hazards are that it is harmful if swallowed, causes skin and eye irritation, and may cause respiratory irritation.
1) This document provides information on the chemical compound Diphenhydramine hydrochloride (CAS 147-24-0), including its identification, hazards, composition, and safety measures for handling.
2) Diphenhydramine hydrochloride is classified as acutely toxic if swallowed and harmful if swallowed. Personal protective equipment should be worn when handling.
3) The document provides details on the compound's properties, toxicology, safe storage and handling, and regulatory information.
This document provides information on the chemical diethyl phthalate (CAS 84-66-2), including its identification, hazards, composition, safe handling and storage recommendations, physical and chemical properties, toxicological information, and regulatory information. It indicates that diethyl phthalate is not hazardous according to current European Union regulations.
This document provides information on the chemical compound 5-Thia-1-azabicyclo(4.2.0)oct-2-ene-2-carboxylicacid, 7-[[(2Z)-2-(2-amino-4-thiazolyl)-2-(methoxyimino)acetyl]amino]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-1,2,4-triazin-3-yl)thio]methyl]-,sodium salt (1:2), including its synonyms, molecular formula, weight, and hazard data from toxicity tests on rats
This document provides information on doxorubicin hydrochloride (CAS 25316-40-9), including its identification, hazards, composition, safe handling and storage, exposure controls, physical and chemical properties, and stability. It identifies doxorubicin hydrochloride as harmful if swallowed and a possible carcinogen, and recommends obtaining special instructions before use, avoiding exposure, and storing it in a cool, dry, light-protected place.
This document provides information on L-(+)-Prolinol (cas 23356-96-9), including suppliers, synonyms, hazards, safe handling and storage procedures, and regulatory information. It summarizes that L-(+)-Prolinol is a colorless viscous liquid that is an irritant and causes eye, skin, and respiratory tract irritation. It should be stored away from sources of ignition and protected from air and moisture.
This document provides information on the chemical compound methylcobalamin (CAS 13422-55-4). It lists suppliers and gives safety and handling details. Key points include:
- Methylcobalamin is not hazardous according to EU or national directives.
- It is a solid compound with molecular formula C63H91CoN13O14P and molecular weight 1,344.38 g/mol.
- Protective equipment like gloves and dust masks are recommended when handling.
- No special transport requirements are needed.
This document provides a material safety data sheet for 1-Bromo-4-(trifluoromethoxy)benzene. It identifies the chemical and lists its hazards such as being harmful if swallowed, irritating to eyes and skin, and potentially causing sensitization. The document provides guidance on handling, storage, exposure controls, firefighting measures, accidental release measures, and regulatory information for the chemical.
Hexanoic acid (CAS 142-62-1) is a hazardous substance that is toxic if swallowed, inhaled, or absorbed through skin. It causes severe burns to skin, eyes, and mucous membranes. Personal protective equipment including gloves, protective clothing, and eye protection should be worn when handling. Hexanoic acid is harmful to aquatic life and proper disposal methods should be followed. The full MSDS provides classification details and recommendations for safe handling and storage of this hazardous chemical.
This document provides information on isonipecotic acid (CAS 498-94-2), including its identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, transport information, and regulatory information. Isonipecotic acid is a white powder that is irritating to eyes, respiratory system and skin. Proper precautions should be taken when handling including avoiding dust formation and wearing protective equipment.
This document provides information on the chemical product Clopyralid (CAS 1702-17-6). It identifies the product as causing serious eye damage and lists precautions such as wearing protective gloves and eye protection when handling it. The document also provides details on the product's properties, toxicity, safe handling and storage instructions, and regulatory information.
1. This document provides information on the chemical 1,3-cyclohexanedione (CAS 504-02-9), including its identification, hazards, composition, safe handling and storage, toxicological properties, and regulatory information.
2. 1,3-cyclohexanedione is a white powder with a melting point of 101-105°C that is not considered hazardous but may cause irritation upon contact with skin, eyes or if inhaled or ingested.
3. Proper precautions such as gloves, eye protection and ventilation should be used when handling 1,3-cyclohexanedione.
This document provides information on 2,4,5-Trifluorobenzoic acid including its composition, hazards, safe handling and storage procedures, physical and chemical properties, toxicity, and regulatory information. It identifies the chemical as an irritant and recommends protective equipment when handling. The document is a material safety data sheet that complies with international standards and regulations.
This document provides information on the chemical 1-methylimidazole (CAS 616-47-7), including its identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection. 1-Methylimidazole is harmful if swallowed or in contact with skin, and causes severe skin burns and eye damage. Personal protective equipment including gloves, goggles and protective clothing should be worn when handling this product.
This document provides a material safety data sheet for roxithromycin (CAS 80214-83-1). It lists hazards such as being harmful if swallowed. It provides details on product identification, composition, hazards, first aid measures, handling and storage recommendations, exposure controls and personal protection, physical properties, stability, disposal considerations and other safety information. The document aims to ensure safe handling and use of this chemical substance.
1. This document provides information on the chemical 5-Fluorooxindole (cas 56341-41-4), including its identification, hazards, composition, safe handling and storage, toxicological properties, and regulatory information.
2. The chemical is not classified as hazardous according to current European Union regulations.
3. It is provided as a solid for use as a laboratory chemical or in the manufacture of other substances. Proper precautions such as gloves and eye protection should be used when handling it.
This document provides an MSDS (Material Safety Data Sheet) for the chemical compound 5-Bromo-2-chloropyridine (CAS 53939-30-3). It lists the product as being a skin and eye irritant that may cause respiratory irritation. The document provides information on the product's properties, safety precautions, first aid measures, handling and storage instructions, exposure controls, physical and chemical properties, stability, toxicity, ecological data, disposal considerations and transport information.
This document summarizes information about Quetiapine Fumarate (cas 111974-72-2):
1) It provides identification information, hazards, composition, first aid measures, and handling and storage requirements.
2) The product is harmful if swallowed and very toxic to aquatic life. Personal protective equipment should be worn when handling.
3) Physical and chemical properties, toxicity, ecological, disposal, and transport information is included for risk assessment purposes.
This document provides the material safety data sheet for 3,4-difluorobenzonitrile (CAS 64248-62-0). It lists the product identifiers and relevant uses. It also summarizes the hazards, composition, first aid measures, fire-fighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, and transport information. Click http://www.guidechem.com/cas-642/64248-62-0.html for suppliers of this product.
1. This document provides information on the chemical 5-Bromo-2-chloropyrimidine (CAS 32779-36-5), including its hazards, safe handling and storage, first aid measures, and regulatory information.
2. 5-Bromo-2-chloropyrimidine is an irritant and may cause skin, eye and respiratory irritation upon contact. It has a melting point between 73-79°C and molecular weight of 193.43 g/mol.
3. Proper protective equipment should be worn when handling this chemical. If contact occurs, rinse thoroughly with water and seek medical advice. Store in a cool, dry and
This document provides a material safety data sheet for 4-Bromopyridine hydrochloride (CAS 19524-06-2). It lists the product's identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, transport information, and regulatory information. The product is harmful if swallowed, a skin and eye irritant, and may cause respiratory irritation.
Chair, Shaji K. Kumar, MD, and patient Vikki, discuss multiple myeloma in this CME/NCPD/AAPA/IPCE activity titled “Restoring Remission in RRMM: Present and Future of Sequential Immunotherapy With GPRC5D-Targeting Options.” For the full presentation, downloadable Practice Aids, and complete CME/NCPD/AAPA/IPCE information, and to apply for credit, please visit us at https://bit.ly/4fYDKkj. CME/NCPD/AAPA/IPCE credit will be available until February 23, 2026.
Distribution of Drugs – Plasma Protein Binding and Blood-Brain BarrierSumeetSharma591398
This presentation provides a detailed overview of drug distribution, focusing on plasma protein binding and the blood-brain barrier (BBB). It explains the factors affecting drug distribution, the role of plasma proteins in drug binding, and how drugs penetrate the BBB. Key topics include the significance of protein-bound vs. free drug concentration, drug interactions, and strategies to enhance drug permeability across the BBB. Ideal for students, researchers, and healthcare professionals in pharmacology and drug development.
Lycopodium is a genus of clubmosses, also known as ground pines or creeping cedars. They are flowerless plants with small leaves that cover their stems and branches.
TunesKit Spotify Converter Crack With Registration Code 2025 Freedfsdsfs386
TunesKit Spotify Converter is a software tool that allows users to convert and download Spotify music to various formats, such as MP3, AAC, FLAC, or WAV. It is particularly useful for Spotify users who want to keep their favorite tracks offline and have them in a more accessible format, especially if they wish to listen to them on devices that do not support the Spotify app.
https://shorturl.at/LDQ9c
Copy Above link & paste in New Tab
Chair, Joshua Sabari, MD, discusses NSCLC in this CME activity titled “Modern Practice Principles in Lung Cancer—First Find the Targets, Then Treat With Precision: A Concise Guide for Biomarker Testing and EGFR-Targeted Therapy in NSCLC.” For the full presentation, downloadable Practice Aid, and complete CME information, and to apply for credit, please visit us at https://bit.ly/3VomnBV. CME credit will be available until February 26, 2026.
FAO's Support Rabies Control in Bali_Jul22.pptxWahid Husein
What is FAO doing to support rabies control programmes in Bali, Indonesia, using One Health approach with mass dog vaccination and integrated bite case management as main strategies
Role of Artificial Intelligence in Clinical Microbiology.pptxDr Punith Kumar
Artificial Intelligence (AI) is revolutionizing clinical microbiology by enhancing diagnostic accuracy, automating workflows, and improving patient outcomes. This presentation explores the key applications of AI in microbial identification, antimicrobial resistance detection, and laboratory automation. Learn how machine learning, deep learning, and data-driven analytics are transforming the field, leading to faster and more efficient microbiological diagnostics. Whether you're a researcher, clinician, or healthcare professional, this presentation provides valuable insights into the future of AI in microbiology.
Strategies for Promoting Innovation in Healthcare Like Akiva Greenfield.pdfakivagreenfieldus
Healthcare innovation has been greatly aided by leaders like Akiva Greenfield, CEO of Nexus, particularly in fields like operational efficiency, revenue cycle management (RCM), and client engagement. In order to ensure both operational success and better patient experiences, Akiva's approach combines technological advancements with an emphasis on improving the human side of healthcare.
COLD-PCR is a modified version of the polymerase chain reaction (PCR) technique used to selectively amplify and enrich rare or minority DNA sequences, such as mutations or genetic variations.
Increased Clinical Trial Complexity | Dr. Ulana Rey | MindLuminaUlana Rey PharmD
Increased Clinical Trial Complexity. By Ulana Rey PharmD for MindLumina. Dr. Ulana Rey discusses how clinical trial complexity—endpoints, procedures, eligibility criteria, countries—has increased over a 20-year period.
PERSONALITY DEVELOPMENT & DEFENSE MECHANISMS.pptxPersonality and environment:...ABHAY INSTITUTION
Personality theory is a collection of ideas that explain how a person's personality develops and how it affects their behavior. It also seeks to understand how people react to situations, and how their personality impacts their relationships.
Key aspects of personality theory
Personality traits: The characteristics that make up a person's personality.
Personality development: How a person's personality develops over time.
Personality disorders: How personality theories can be used to study personality disorders.
Personality and environment: How a person's personality is influenced by their environment.
Dr. Ahmed Elzainy
Mastering Mobility- Joints of Lower Limb -Dr. Ahmed Elzainy Associate Professor of Anatomy and Embryology - American Fellowship in Medical Education (FAIMER), Philadelphia, USA
Progress Test Coordinator
Use of Letrozole in Gynaecology: Beyond Ovulation InductionSujoy Dasgupta
501 53-1
1. Click http://www.guidechem.com/cas-501/501-53-1.html for suppliers of this product
Benzyl chloroformate (cas 501-53-1) MSDS
1.
1.1
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product identifiers
Product name
Product Number
Brand
CAS-No.
:
:
:
:
Benzyl chloroformate
119938
Anonymous
501-53-1
1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances
2.
2.1
2.2
HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Skin corrosion (Category 1B)
Carcinogenicity (Category 1B)
Specific target organ toxicity - single exposure (Category 3)
Acute aquatic toxicity (Category 1)
Chronic aquatic toxicity (Category 1)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
May cause cancer. Causes burns. Irritating to respiratory system. Very toxic to aquatic organisms, may
cause long-term adverse effects in the aquatic environment.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word
Hazard statement(s)
H314
H335
H350
H410
Precautionary statement(s)
P201
Danger
Causes severe skin burns and eye damage.
May cause respiratory irritation.
May cause cancer.
Very toxic to aquatic life with long lasting effects.
Obtain special instructions before use.
P261
P273
P280
P305 + P351 + P338
P310
Supplemental Hazard
Avoid breathing vapours.
Avoid release to the environment.
Wear protective gloves/ protective clothing/ eye protection/ face
protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/ physician.
none
Statements
Restricted to professional users.
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R45
R34
R37
R50/53
May cause cancer.
Causes burns.
Irritating to respiratory system.
Very toxic to aquatic organisms, may cause long-term adverse effects in
the aquatic environment.
S-phrase(s)
S53
S26
Avoid exposure - obtain special instructions before use.
In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
2. S36/37/39
S45
S61
Wear suitable protective clothing, gloves and eye/face protection.
In case of accident or if you feel unwell, seek medical advice immediately
(show the label where possible).
Avoid release to the environment. Refer to special instructions/ Safety
data sheets.
Restricted to professional users.
2.3
3.
3.1
Other hazards
Contact with water liberates toxic gas.
COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Synonyms
Formula
Molecular Weight
Component
Benzyl chloroformate
:
:
:
Z-Chloride
Carbobenzoxy chloride
C8H7ClO2
170,59 g/mol
Concentration
CAS-No.
EC-No.
Index-No.
Benzyl chloride
CAS-No.
501-53-1
207-925-0
607-064-00-4
100-44-7
-
0,1 - 3 %
EC-No.
Index-No.
202-853-6
602-037-00-3
4.
4.1
4.2
4.3
5.
5.1
5.2
5.3
5.4
6.
6.1
FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Take
victim immediately to hospital. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
water. Consult a physician.
Most important symptoms and effects, both acute and delayed
Nausea, Shock.
Indication of any immediate medical attention and special treatment needed
no data available
FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Dry powder
Special hazards arising from the substance or mixture
Carbon oxides, Hydrogen chloride gas, Phosgene
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available
ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
3. 6.2
6.3
6.4
7.
7.1
Wear respiratory protection. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove
all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form
explosive concentrations. Vapours can accumulate in low areas.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and
place in container for disposal according to local regulations (see section 13). Do not flush with water.
Keep in suitable, closed containers for disposal.
Reference to other sections
For disposal see section 13.
HANDLING AND STORAGE
Precautions for safe handling
Avoid exposure - obtain special instructions before use.Avoid contact with skin and eyes. Avoid inhalation
of vapour or mist.
Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic
charge.
7.2
7.3
8.
8.1
8.2
9.
9.1
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Never allow product to get in contact with water during storage.
Recommended storage temperature: 2 - 8 °C
Moisture sensitive. Heat sensitive. Over time, pressure may increase causing containers to burst
Specific end uses
no data available
EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling
the product.
Personal protective equipment
Eye/face protection
Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection
tested and approved under appropriate government standards such as NIOSH (US) or EN
166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a)
b)
c)
d)
e)
Appearance
Odour
Odour Threshold
pH
Melting point/freezing
Form: liquid, clear
Colour: light yellow
pungent
no data available
no data available
Melting point/range: -18 °C
4. f)
g)
point
Initial boiling point and
boiling range
Flash point
152 °C
92 °C - closed cup
h) Evaporation rate no data available
i) Flammability (solid, gas) no data available
j)
k)
l)
Upper/lower
flammability or
explosive limits
Vapour pressure
Vapour density
no data available
95,809 hPa at 20 °C
195,065 hPa at 55 °C
5,89 - (Air = 1.0)
m) Relative density 1,217 g/cm3 at 20 °C
n)
o)
p)
q)
r)
s)
t)
Water solubility
Partition coefficient: n-
octanol/water
Autoignition
temperature
Decomposition
temperature
Viscosity
Explosive properties
Oxidizing properties
no data available
no data available
no data available
no data available
no data available
no data available
no data available
9.2
10.
10.1
10.2
10.3
10.4
10.5
10.6
11.
11.1
Other safety information
no data available
STABILITYAND REACTIVITY
Reactivity
Can violently decompose at elevated temperatures
Contact with water liberates toxic gas.
Chemical stability
To avoid thermal decomposition, do not overheat. Decomposes when moist.
Possibility of hazardous reactions
May decompose on exposure to moist air or water.Reacts violently with water.
Conditions to avoid
Heat, flames and sparks. Exposure to moisture. Do not heat over: 75° C
Incompatible materials
no data available
Hazardous decomposition products
Other decomposition products - no data available
TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
LD50 Oral - rat - 3.000 mg/kg
LC50 Inhalation - rat - 4 h - 590 mg/m3
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
Carcinogen
IARC: 2A - Group 2A: Probably carcinogenic to humans (Benzyl chloride)
Reproductive toxicity
no data available
5. Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
Ingestion
Skin
Eyes
May be fatal if inhaled. Material is extremely destructive to the tissue of the
mucous membranes and upper respiratory tract.
Harmful if swallowed. Causes burns.
Harmful if absorbed through skin. Causes skin burns.
Causes eye burns.
Signs and Symptoms of Exposure
Nausea, Shock.
Additional Information
RTECS: Not available
12.
12.1
12.2
12.3
12.4
12.5
12.6
13.
13.1
14.
14.1
ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available
DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
This combustible material may be burned in a chemical incinerator equipped with an afterburner and
scrubber. Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.
TRANSPORT INFORMATION
UN number
ADR/RID: 1739 IMDG: 1739 IATA: 1739
14.2 UN proper shipping name
ADR/RID:
IMDG:
IATA:
BENZYL CHLOROFORMATE
BENZYL CHLOROFORMATE
Benzyl chloroformate
Passenger Aircraft: Not permitted for transport
14.3 Transport hazard class(es)
14.4
14.5
14.6
15.
ADR/RID: 8
Packaging group
ADR/RID: I
Environmental hazards
ADR/RID: yes
Special precautions for user
no data available
REGULATORYINFORMATION
IMDG: 8
IMDG: I
IMDG Marine pollutant: yes
IATA: 8
IATA: I
IATA: no
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.1
15.2
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available
6. 16. OTHER INFORMATION
Further information
The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information this document is based on the resent state
of our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. guidechem shall not be
held liable for any damage resulting from handling or from contact with the above product.
See reverse side of invoice or packing slip for additional terms and conditions of sale.