SlideShare a Scribd company logo

Assembling and disassembling pc. pdf

•
•
J
JohnRebenRequinto1

The document provides step-by-step instructions for assembling and disassembling a computer. It describes the 10 steps to assemble a computer which include opening the case, installing the power supply, attaching components to the motherboard, installing the motherboard, installing internal drives, connecting internal cables, installing motherboard power connections, connecting external cables, and booting the computer. It also lists the 10 steps to disassemble a computer which are performed in the reverse order.

1 of 33
Downloaded 78 times
CORE MODULE 1 Fundamentals of Computer Hardware & Networking Assembling and Disassembling PC
Computer Assembly Is An Essential Job Of A Computer Installation Technician. Computer Assembly Is A Process In Which All The Internal Components Required For The Computer System Are Fitted So As To Make The Computer Functional. There Is A Proper Sequence Of Attachment Of Each And Every Component Into The Computer System. Introduction
Computer Assembly As We Know, Computer Assembly Is A Systematic Process. First, Arrange The Computer Parts. The Sequence For Computer Assembly 1. Open The Case 2. Install The Power Supply 3. Attach The Components To The Motherboard 4. Install The Motherboard 5. Install Internal Drives 6. Connect All Internal Cables 7. Install Motherboard Power Connections 8. Connect External Cables To The Computer 9. Boot The Computer For The First Time.
Material Required  Computer Case, With Power Supply Installed  Motherboard  CPU  Heat Sink/Fan Assembly  Thermal Compound  RAM Module(s)  Motherboard Standoffs And Screws  Anti-static Wrist Strap And Anti-static Mat  Tool Kit
Procedure for Computer Assembling Step 1: Open The Case The First Step In Assembling A Computer Is To Open The Computer Case. To Open The Case, First Remove The Screws Of The Left Side Cover And Slide The Side Cover.
Step 2: Install The Power Supply The Next Step Is To Install A Power Supply. There Are Usually Four Screws That Attach The Power Supply To The Case.
Step 3: Attach The Components To Motherboard The Motherboard Has To Be Prepared Before Its Installation. To Prepare The Motherboard, You First Need To Install The CPU, Then The Heat Sink On The CPU And CPU Fan.
CPU A CPU Socket Uses A Series Of Pins To Connect A CPU’s Processor To The Pc’s Motherboard. If A CPU Is Connected Via A CPU Socket.
Heat sink and fan assembly A Heat Sink And Fan (HSF) Is An Active Cooling Solution Used To Cool Down Integrated Circuits In Computer Systems, Commonly The Central Processing Unit (CPU).
Connect The Assembly Power Cable To The CPU Fan Connector On The Motherboard.
Installation of RAM To Install The RAM First On The Motherboard And Then Fix The Motherboard In The Case. To Install RAM, First Ensure Its Compatibility With The Motherboard.
After Preparing The Motherboard, You Can Install In The Computer Case. Step 4: Install motherboard
The Hard Drive Is The Device Which Stores All The Data. Connect The Power Cable Coming From The SMPS To The Power Socket Of Hard Disk Drive. Connect SATA Data Cable From Hard Disk Drive Socket To The Motherboard Socket Step 5: Install internal drives Hard drive
Power Cables Are Used To Distribute Electricity From The Power Supply To The Motherboard And Other Components. Data Cables Transmit Data Between The Motherboard And Storage Devices, Such As Hard Drives. Step 6: Connect all internal cables
The Advanced Technology Extended (ATX) Main Power Connector Will Have Either 20 Or 24 Pins. Step 7: Install motherboard power connections
Step 8: Connect external cables to the computer Connecting Monitor The VGA Cable Is Used To Connect To Monitor.
Step 8: Connect external cables to the computer Connecting Keyboard If It Uses A USB Connector, Plug It Into Any Of The USB Ports On The Back Of The Computer.
Step 8: Connect external cables to the computer Connecting Headphones Or Speakers, And Microphone Connect The External Speakers Or Headphones, To Computer’s Audio Port (Either On The Front Or Back Of The Computer Case).
Step 8: Connect external cables to the computer Connect The Computer To A Power Supply Power Supply Cable Connect Into The Back Of The Computer Case.
Step 8: Connect external cables to the computer Connecting Printer, Scanner, Webcam
Step 9: Starting the computer Always Remember That The First Step Is To Push Power Button Of The CPU Than The Monitor’s. An Operating System Or System Software Like Window Or Linux Will Start Loading, Now Your Computer Is Ready To Use.
Procedure for Computer Dissembling Disassembly Is The Process Of Breaking Down A Device Into Separate Parts. Material Required  One Working PC  An Anti-static Wrist Strap  An Anti-static Mat  Anti-static Bags Of Various Sizes  Technician’s Toolkit  A Plastic Cup Or Box To Organize Screws, Nuts, And Bolts
Procedure for Computer Dissembling Step 1: Unplugging  Unplug The Power Cord From The PC  Unplug All The Peripherals Attached To The Computer, Such As The Keyboard, Mouse, Monitor, Headphones.
Procedure for Computer Dissembling Step 2: Open The Case First Remove The Screws Of The Left Side Cover And Slide The Side Cover.
Procedure for Computer Dissembling Step 3: Disconnect All The Connectors Disconnect All The Connectors Connected To The Motherboard. These Include SATA Power Cable And Data Cable Of HDD As Well As SATA Cable Of Optical Drive
Procedure for Computer Dissembling Step 4: Remove The Fan Remove The Fan Now.
Procedure for Computer Dissembling Step 5: Remove The Power Supply Remove The Power Supply Is Connected To The Motherboard By A 20-pin Connector And 4-pin Connector.
Procedure for Computer Dissembling Step 6: Removing HDD And Optical Drive Remove The SATA Cable Connecting To The HDD And Optical Drive In Motherboard.
Procedure for Computer Dissembling Step 7: Remove RAM (Random Access Memory) Modules To Remove The RAM
Procedure for Computer Dissembling Step 8: Remove Expansion Cards To Remove The Expansion Cards, Disconnect The Cables Attached To It.
Procedure for Computer Dissembling Step 9: Remove Motherboard To Remove The Motherboard, Disconnect All The Cables From The Motherboard.
Procedure for Computer Dissembling Step 10: Reassemble The Components  Identify Every Component And Take Its Photograph.  After Identification Of Each Component, Put All The Components Back In Their Place And Ensure That All Cables And Wires Are Connected At The Right Place To Avoid Further Troubleshooting.
Assembling and disassembling pc. pdf

More Related Content

Assembling and disassembling pc. pdf

  • 1. CORE MODULE 1 Fundamentals of Computer Hardware & Networking Assembling and Disassembling PC
  • 2. Computer Assembly Is An Essential Job Of A Computer Installation Technician. Computer Assembly Is A Process In Which All The Internal Components Required For The Computer System Are Fitted So As To Make The Computer Functional. There Is A Proper Sequence Of Attachment Of Each And Every Component Into The Computer System. Introduction
  • 3. Computer Assembly As We Know, Computer Assembly Is A Systematic Process. First, Arrange The Computer Parts. The Sequence For Computer Assembly 1. Open The Case 2. Install The Power Supply 3. Attach The Components To The Motherboard 4. Install The Motherboard 5. Install Internal Drives 6. Connect All Internal Cables 7. Install Motherboard Power Connections 8. Connect External Cables To The Computer 9. Boot The Computer For The First Time.
  • 4. Material Required  Computer Case, With Power Supply Installed  Motherboard  CPU  Heat Sink/Fan Assembly  Thermal Compound  RAM Module(s)  Motherboard Standoffs And Screws  Anti-static Wrist Strap And Anti-static Mat  Tool Kit
  • 5. Procedure for Computer Assembling Step 1: Open The Case The First Step In Assembling A Computer Is To Open The Computer Case. To Open The Case, First Remove The Screws Of The Left Side Cover And Slide The Side Cover.
  • 6. Step 2: Install The Power Supply The Next Step Is To Install A Power Supply. There Are Usually Four Screws That Attach The Power Supply To The Case.
  • 7. Step 3: Attach The Components To Motherboard The Motherboard Has To Be Prepared Before Its Installation. To Prepare The Motherboard, You First Need To Install The CPU, Then The Heat Sink On The CPU And CPU Fan.
  • 8. CPU A CPU Socket Uses A Series Of Pins To Connect A CPU’s Processor To The Pc’s Motherboard. If A CPU Is Connected Via A CPU Socket.
  • 9. Heat sink and fan assembly A Heat Sink And Fan (HSF) Is An Active Cooling Solution Used To Cool Down Integrated Circuits In Computer Systems, Commonly The Central Processing Unit (CPU).
  • 10. Connect The Assembly Power Cable To The CPU Fan Connector On The Motherboard.
  • 11. Installation of RAM To Install The RAM First On The Motherboard And Then Fix The Motherboard In The Case. To Install RAM, First Ensure Its Compatibility With The Motherboard.
  • 12. After Preparing The Motherboard, You Can Install In The Computer Case. Step 4: Install motherboard
  • 13. The Hard Drive Is The Device Which Stores All The Data. Connect The Power Cable Coming From The SMPS To The Power Socket Of Hard Disk Drive. Connect SATA Data Cable From Hard Disk Drive Socket To The Motherboard Socket Step 5: Install internal drives Hard drive
  • 14. Power Cables Are Used To Distribute Electricity From The Power Supply To The Motherboard And Other Components. Data Cables Transmit Data Between The Motherboard And Storage Devices, Such As Hard Drives. Step 6: Connect all internal cables
  • 15. The Advanced Technology Extended (ATX) Main Power Connector Will Have Either 20 Or 24 Pins. Step 7: Install motherboard power connections
  • 16. Step 8: Connect external cables to the computer Connecting Monitor The VGA Cable Is Used To Connect To Monitor.
  • 17. Step 8: Connect external cables to the computer Connecting Keyboard If It Uses A USB Connector, Plug It Into Any Of The USB Ports On The Back Of The Computer.
  • 18. Step 8: Connect external cables to the computer Connecting Headphones Or Speakers, And Microphone Connect The External Speakers Or Headphones, To Computer’s Audio Port (Either On The Front Or Back Of The Computer Case).
  • 19. Step 8: Connect external cables to the computer Connect The Computer To A Power Supply Power Supply Cable Connect Into The Back Of The Computer Case.
  • 20. Step 8: Connect external cables to the computer Connecting Printer, Scanner, Webcam
  • 21. Step 9: Starting the computer Always Remember That The First Step Is To Push Power Button Of The CPU Than The Monitor’s. An Operating System Or System Software Like Window Or Linux Will Start Loading, Now Your Computer Is Ready To Use.
  • 22. Procedure for Computer Dissembling Disassembly Is The Process Of Breaking Down A Device Into Separate Parts. Material Required  One Working PC  An Anti-static Wrist Strap  An Anti-static Mat  Anti-static Bags Of Various Sizes  Technician’s Toolkit  A Plastic Cup Or Box To Organize Screws, Nuts, And Bolts
  • 23. Procedure for Computer Dissembling Step 1: Unplugging  Unplug The Power Cord From The PC  Unplug All The Peripherals Attached To The Computer, Such As The Keyboard, Mouse, Monitor, Headphones.
  • 24. Procedure for Computer Dissembling Step 2: Open The Case First Remove The Screws Of The Left Side Cover And Slide The Side Cover.
  • 25. Procedure for Computer Dissembling Step 3: Disconnect All The Connectors Disconnect All The Connectors Connected To The Motherboard. These Include SATA Power Cable And Data Cable Of HDD As Well As SATA Cable Of Optical Drive
  • 26. Procedure for Computer Dissembling Step 4: Remove The Fan Remove The Fan Now.
  • 27. Procedure for Computer Dissembling Step 5: Remove The Power Supply Remove The Power Supply Is Connected To The Motherboard By A 20-pin Connector And 4-pin Connector.
  • 28. Procedure for Computer Dissembling Step 6: Removing HDD And Optical Drive Remove The SATA Cable Connecting To The HDD And Optical Drive In Motherboard.
  • 29. Procedure for Computer Dissembling Step 7: Remove RAM (Random Access Memory) Modules To Remove The RAM
  • 30. Procedure for Computer Dissembling Step 8: Remove Expansion Cards To Remove The Expansion Cards, Disconnect The Cables Attached To It.
  • 31. Procedure for Computer Dissembling Step 9: Remove Motherboard To Remove The Motherboard, Disconnect All The Cables From The Motherboard.
  • 32. Procedure for Computer Dissembling Step 10: Reassemble The Components  Identify Every Component And Take Its Photograph.  After Identification Of Each Component, Put All The Components Back In Their Place And Ensure That All Cables And Wires Are Connected At The Right Place To Avoid Further Troubleshooting.