Pollen tube growth

Unlike animal sperm which is motile, the sperm of most seed plants is immotile and relies on the pollen tube to carry it to the ovule where the sperm is released.^[8] The pollen tube penetrates the stigma and elongates through the extracellular matrix of the style before reaching the ovary. Then near the receptacle, it breaks through the ovule through the micropyle (an opening in the ovule wall) and the pollen tube "bursts" into the embryo sac, releasing sperm.^[9] The growth of the pollen tube has been believed to depend on chemical cues from the pistil, however these mechanisms were poorly understood until 1995. Work done on tobacco plants revealed a family of glycoproteins called TTS proteins that enhanced growth of pollen tubes.^[9] Pollen tubes in a sugar free pollen germination medium and a medium with purified TTS proteins both grew. However, in the TTS medium, the tubes grew at a rate 3x that of the sugar-free medium.^[9] TTS proteins were also placed on various locations of semi in vivo pollinated pistils, and pollen tubes were observed to immediately extend toward the proteins. Transgenic plants lacking the ability to produce TTS proteins had slower pollen tube growth and reduced fertility.^[9]

Rupture of pollen tube

The rupture of the pollen tube to release sperm in Arabidopsis has been shown to depend on a signal from the female gametophyte. Specific proteins called FER protein kinases present in the ovule control the production of highly reactive derivatives of oxygen called reactive oxygen species (ROS). ROS levels have been shown via GFP to be at their highest during floral stages when the ovule is the most receptive to pollen tubes, and lowest during times of development and following fertilisation.^[8] High amounts of ROS activate Calcium ion channels in the pollen tube, causing these channels to take up Calcium ions in large amounts. This increased uptake of calcium causes the pollen tube to rupture, and release its sperm into the ovule.^[8] Pistil feeding assays in which plants were fed diphenyl iodonium chloride (DPI) suppressed ROS concentrations in Arabidopsis, which in turn prevented pollen tube rupture.^[8]

Flowering plants

After being fertilised, the ovary starts to swell and develop into the fruit.^[10] With multi-seeded fruits, multiple grains of pollen are necessary for syngamy with each ovule. The growth of the pollen tube is controlled by the vegetative (or tube) cytoplasm. Hydrolytic enzymes are secreted by the pollen tube that digest the female tissue as the tube grows down the stigma and style; the digested tissue is used as a nutrient source for the pollen tube as it grows. During pollen tube growth towards the ovary, the generative nucleus divides to produce two separate sperm nuclei (haploid number of chromosomes)^[11] – a growing pollen tube therefore contains three separate nuclei, two sperm and one tube.^[12] The sperms are interconnected and dimorphic, the large one, in a number of plants, is also linked to the tube nucleus and the interconnected sperm and the tube nucleus form the "male germ unit".^[13]

Double fertilisation is the process in angiosperms (flowering plants) in which two sperm from each pollen tube fertilise two cells in a female gametophyte (sometimes called an embryo sac) that is inside an ovule. After the pollen tube enters the gametophyte, the pollen tube nucleus disintegrates and the two sperm cells are released; one of the two sperm cells fertilises the egg cell (at the bottom of the gametophyte near the micropyle), forming a diploid (2n) zygote. This is the point when fertilisation actually occurs; pollination and fertilisation are two separate processes. The nucleus of the other sperm cell fuses with two haploid polar nuclei (contained in the central cell) in the centre of the gametophyte. The resulting cell is triploid (3n). This triploid cell divides through mitosis and forms the endosperm, a nutrient-rich tissue, inside the seed.^[7] The two central-cell maternal nuclei (polar nuclei) that contribute to the endosperm arise by mitosis from the single meiotic product that also gave rise to the egg. Therefore, maternal contribution to the genetic constitution of the triploid endosperm is double that of the embryo.

One primitive species of flowering plant, Nuphar polysepala, has endosperm that is diploid, resulting from the fusion of a sperm with one, rather than two, maternal nuclei. It is believed that early in the development of angiosperm lineages, there was a duplication in this mode of reproduction, producing seven-celled/eight-nucleate female gametophytes, and triploid endosperms with a 2:1 maternal to paternal genome ratio.^[14]

In many plants, the development of the flesh of the fruit is proportional to the percentage of fertilised ovules. For example, with watermelon, about a thousand grains of pollen must be delivered and spread evenly on the three lobes of the stigma to make a normal sized and shaped fruit.^{[citation needed]}

Self-pollination and outcrossing

Outcrossing, or cross-fertilisation, and self-fertilisation represent different strategies with differing benefits and costs. An estimated 48.7% of plant species are either dioecious or self-incompatible obligate outcrossers.^[15] It is also estimated that about 42% of flowering plants exhibit a mixed mating system in nature.^[16]

In the most common kind of mixed mating system, individual plants produce a single type of flower and fruits may contain self-fertilised, outcrossed or a mixture of progeny types. The transition from cross-fertilisation to self-fertilisation is the most common evolutionary transition in plants, and has occurred repeatedly in many independent lineages.^[17] About 10-15% of flowering plants are predominantly self-fertilising.^[17]

Under circumstances where pollinators or mates are rare, self-fertilisation offers the advantage of reproductive assurance.^[17] Self-fertilisation can therefore result in improved colonisation ability. In some species, self-fertilisation has persisted over many generations. Capsella rubella is a self-fertilising species that became self-compatible 50,000 to 100,000 years ago.^[18] Arabidopsis thaliana is a predominantly self-fertilising plant with an out-crossing rate in the wild of less than 0.3%;^[19] a study suggested that self-fertilisation evolved roughly a million years ago or more in A. thaliana.^[20] In long-established self-fertilising plants, the masking of deleterious mutations and the production of genetic variability is infrequent and thus unlikely to provide a sufficient benefit over many generations to maintain the meiotic apparatus. Consequently, one might expect self-fertilisation to be replaced in nature by an ameiotic asexual form of reproduction that would be less costly. However the actual persistence of meiosis and self-fertilisation as a form of reproduction in long-established self-fertilising plants may be related to the immediate benefit of efficient recombinational repair of DNA damage during formation of germ cells provided by meiosis at each generation.^{[citation needed]}

Internal vs. external

Consideration as to whether an animal (more specifically a vertebrate) uses internal or external fertilisation is often dependent on the method of birth. Oviparous animals laying eggs with thick calcium shells, such as chickens, or thick leathery shells generally reproduce via internal fertilisation so that the sperm fertilises the egg without having to pass through the thick, protective, tertiary layer of the egg. Ovoviviparous and viviparous animals also use internal fertilisation. Although some organisms reproduce via amplexus, they may still use internal fertilisation, as with some salamanders. Advantages of internal fertilisation include minimal waste of gametes, greater chance of individual egg fertilisation, longer period of egg protection, and selective fertilisation. Many females have the ability to store sperm for extended periods of time and can fertilise their eggs at their own desire.^{[citation needed]}

Oviparous animals producing eggs with thin tertiary membranes or no membranes at all, on the other hand, use external fertilisation methods. Such animals may be more precisely termed ovuliparous.^[21] External fertilisation is advantageous in that it minimises contact (which decreases the risk of disease transmission), and greater genetic variation.

Sea urchins

Sperm find the eggs via chemotaxis, a type of ligand/receptor interaction. Resact is a 14 amino acid peptide purified from the jelly coat of A. punctulata that attracts the migration of sperm.

After finding the egg, the sperm penetrates the jelly coat through a process called sperm activation. In another ligand/receptor interaction, an oligosaccharide component of the egg binds and activates a receptor on the sperm and causes the acrosomal reaction. The acrosomal vesicles of the sperm fuse with the plasma membrane and are released. In this process, molecules bound to the acrosomal vesicle membrane, such as bindin, are exposed on the surface of the sperm. These contents digest the jelly coat and eventually the vitelline membrane. In addition to the release of acrosomal vesicles, there is explosive polymerisation of actin to form a thin spike at the head of the sperm called the acrosomal process.

The sperm binds to the egg through another ligand reaction between receptors on the vitelline membrane. The sperm surface protein bindin, binds to a receptor on the vitelline membrane identified as EBR1.

Fusion of the plasma membranes of the sperm and egg are likely mediated by bindin. At the site of contact, fusion causes the formation of a fertilisation cone.

Mammals

Mammals internally fertilise through copulation.^[22] After a male ejaculates, many sperm move to the upper vagina (via contractions from the vagina) through the cervix and across the length of the uterus to meet the ovum. In cases where fertilisation occurs, the female usually ovulates during a period that extends from hours before copulation to a few days after; therefore, in most mammals, it is more common for ejaculation to precede ovulation than vice versa.^{[citation needed]}

When sperm are deposited into the anterior vagina, they are not capable of fertilisation (i.e., non-capacitated)^{[clarification needed]} and are characterised by slow linear motility patterns. This motility, combined with muscular contractions enables sperm transport towards the uterus and oviducts.^[23] There is a pH gradient within the micro-environment of the female reproductive tract such that the pH near the vaginal opening is lower (approximately 5) than the oviducts (approximately 8).^[24] The sperm-specific pH-sensitive calcium transport protein called CatSper increases the sperm cell permeability to calcium as it moves further into the reproductive tract. Intracellular calcium influx contributes to sperm capacitation and hyperactivation, causing a more violent and rapid non-linear motility pattern as sperm approach the oocyte. The capacitated spermatozoon and the oocyte meet and interact in the ampulla of the fallopian tube. Rheotaxis, thermotaxis and chemotaxis are known mechanisms that guide sperm towards the egg during the final stage of sperm migration.^[25] Spermatozoa respond (see Sperm thermotaxis) to the temperature gradient of ~2 °C between the oviduct and the ampulla,^[26] and chemotactic gradients of progesterone have been confirmed as the signal emanating from the cumulus oophorus cells surrounding rabbit and human oocytes.^[27] Capacitated and hyperactivated sperm respond to these gradients by changing their behaviour and moving towards the cumulus-oocyte complex. Other chemotactic signals such as formyl Met-Leu-Phe (fMLF) may also guide spermatozoa.^[28]

The zona pellucida, a thick layer of extracellular matrix that surrounds the egg and is similar to the role of the vitelline membrane in sea urchins, binds the sperm. Unlike sea urchins, the sperm binds to the egg before the acrosomal reaction. ZP3, a glycoprotein in the zona pellucida, is responsible for egg/sperm adhesion in humans. The receptor galactosyltransferase (GalT) binds to the N-acetylglucosamine residues on the ZP3 and is important for binding with the sperm and activating the acrosome reaction. ZP3 is sufficient though unnecessary for sperm/egg binding. Two additional sperm receptors exist: a 250kD protein that binds to an oviduct secreted protein, and SED1, which independently binds to the zona. After the acrosome reaction, the sperm is believed to remain bound to the zona pellucida through exposed ZP2 receptors. These receptors are unknown in mice but have been identified in guinea pigs.^{[citation needed]}

In mammals, the binding of the spermatozoon to the GalT initiates the acrosome reaction. This process releases the hyaluronidase that digests the matrix of hyaluronic acid in the vestments around the oocyte. Additionally, heparin-like glycosaminoglycans (GAGs) are released near the oocyte that promote the acrosome reaction.^[29] Fusion between the oocyte plasma membranes and sperm follows and allows the sperm nucleus, the typical centriole, and atypical centriole that is attached to the flagellum, but not the mitochondria, to enter the oocyte.^[30] The protein CD9 likely mediates this fusion in mice (the binding homolog). The egg "activates" itself upon fusing with a single sperm cell and thereby changes its cell membrane to prevent fusion with other sperm. Zinc atoms are released during this activation.^{[citation needed]}

Wikimedia Commons has media related to Mammalian fertilisation.

This process ultimately leads to the formation of a diploid cell called a zygote. The zygote divides to form a blastocyst and, upon entering the uterus, implants in the endometrium, beginning pregnancy. Embryonic implantation not in the uterine wall results in an ectopic pregnancy that can kill the mother.

In such animals as rabbits, coitus induces ovulation by stimulating the release of the pituitary hormone gonadotropin; this release greatly increases the likelihood of pregnancy.

Humans

Main article: Human fertilisation

Fertilisation in humans is the union of a human egg and sperm, usually occurring in the ampulla of the fallopian tube, producing a single celled zygote, the first stage of life in the development of a genetically unique organism,^[31] and initiating embryonic development. Scientists discovered the dynamics of human fertilisation in the nineteenth century.

The term conception commonly refers to "the process of becoming pregnant involving fertilisation or implantation or both".^[32] Its use makes it a subject of semantic arguments about the beginning of pregnancy, typically in the context of the abortion debate. Upon gastrulation, which occurs around 16 days after fertilisation, the implanted blastocyst develops three germ layers, the endoderm, the ectoderm and the mesoderm, and the genetic code of the father becomes fully involved in the development of the embryo; later twinning is impossible. Additionally, interspecies hybrids survive only until gastrulation and cannot further develop. However, some human developmental biology literature refers to the conceptus and such medical literature refers to the "products of conception" as the post-implantation embryo and its surrounding membranes.^[33] The term "conception" is not usually used in scientific literature because of its variable definition and connotation.

Insects

This section needs expansion. You can help by adding to it. (February 2015)

Insects in different groups, including the Odonata (dragonflies and damselflies) and the Hymenoptera (ants, bees, and wasps) practise delayed fertilisation. Among the Odonata, females may mate with multiple males, and store sperm until the eggs are laid. The male may hover above the female during egg-laying (oviposition) to prevent her from mating with other males and replacing his sperm; in some groups such as the darters, the male continues to grasp the female with his claspers during egg-laying, the pair flying around in tandem.^[34] Among social Hymenoptera, honeybee queens mate only on mating flights, in a short period lasting some days; a queen may mate with eight or more drones. She then stores the sperm for the rest of her life, perhaps for five years or more.^[35][36]

Fertilisation in protozoa

There are three types of fertilisation processes in protozoa:^[37]

• gametogamy;
• autogamy;^[38][39]
• gamontogamy.

Fertilisation in algae

Algae, like some land plants, undergo alternation of generations. Some algae are isomorphic, where both the sporophyte (2n) and gameteophyte (n) are the same morphologically. When algae reproduction is described as oogamous, the male and female gametes are different morphologically, where there is a large non-motile egg for female gametes, and the male gamete are uniflagellate (motile). Via the process of syngamy, these will form a new zygote, regenerating the sporophyte generation again.