HoldUp Device.pdf - Alarm Systems Corporation

Hold-Up & Panic <strong>Device</strong>s<br />

Hold-Up Switches<br />

264 Money Clip<br />

• Designed for installation in cash registers,<br />

cash boxes and at tellers' windows<br />

• When activated, sends and immediate<br />

signal to either the police or central office<br />

• Single pole double-throw contacts<br />

• Recessed screws provided for easy<br />

mounting<br />

• Dimensions:<br />

158mm L x 57mm W x 19mm D<br />

266 Foot Rail<br />

• Reliable easy to operate foot activated<br />

hold-up device<br />

• Housing made from rugged cast<br />

aluminium<br />

• Designed to minimize the possibility of<br />

false alarms while permitting unobtrusive<br />

operation<br />

• Indicator flag locks when alarm is tripped<br />

• Dimensions:<br />

460mm L x 90mm W x 120mm H<br />

269R Hold-Up Switch<br />

• Double-pole double-throw contacts for<br />

multi-notifications<br />

• Switch design provides totally silent<br />

operation<br />

• Twin 45° screw terminals with EOL resister<br />

splicing terminal<br />

• Adhesive pads for temporary positioning<br />

prior to screw mounting<br />

• Operating temp: 14°F to140°F<br />

• Listed for UL636 Hold-Up alarm units and<br />

systems<br />

• Dimensions:<br />

89mm L x 51mm W x 32mm D<br />

270R Hardwired Hold-Up Switch In Plastic<br />

Case<br />

• Switch Type: Plunger type DPDT<br />

• Switch action: Selectable latching or<br />

momentary<br />

• Switch rating: 0.2A @ 30VDC max.<br />

• Connections: four position 45° screw<br />

terminal block for each output side with<br />

EOL resister splicing terminals<br />

• Listed for UL636 Hold-Up alarm units and<br />

system<br />

• Dimensions:<br />

89mm L x 51mm W x 38mm D<br />

268 Hold-Up Switch<br />

• No chance of accidental tripping<br />

• Smooth operation without danger of being<br />

detected<br />

• Supplied with SPDT contacts for open or<br />

closed circuit systems

---

Hold-Up & Panic <strong>Device</strong>s<br />

Panic Buttons<br />

PB1 Panic Button Plastic Case<br />

• UL Listed Microswitch rated at 5AMP @<br />

24VDC<br />

• Tough ABS plastic<br />

• Output: NC, NO<br />

• Dimensions:<br />

56mm L x 56mm W x 26mm D<br />

PB2 Panic Button Plastic Case<br />

• UL Listed Microswitch rated at 5AMP @<br />

24VDC<br />

• Tough ABS plastic<br />

• Output: NC, NO<br />

• Dimensions:<br />

60mm L x 45mm W x 28mm D<br />

For more information:<br />

Asia Pacific Headquarters: Tel: (86) 21-5257 4568<br />

Australia Tel: (61) 1300 368 755<br />

China Tel: (86) 755-8299 5168<br />

Hong Kong Tel: (852) 2405 2323<br />

www.security.honeywell.com<br />

[email protected]<br />

Automation & Control Solutions<br />

Honeywell Security - Asia Pacific<br />

Honeywell International Inc.<br />

www.honeywell.com<br />

PB110 Panic Button Metal Case<br />

• Microswitch rated at 10AMP @ 250VAC<br />

• Metal case<br />

• Output: NC, NO<br />

• Dimensions:<br />

65mm L x 53mm W x 25mm D<br />

India Tel: (91) 124 5105671<br />

Korea Tel: (82) 2-799 6130<br />

Singapore Tel: (65) 6333 9563<br />

Taiwan Tel: (886) 2-2245 1000<br />

hold-upAP0505<br />

©2005 Honeywell International Inc.