-
Pass over on custom pc
Hey there, am about to pull the trigger and buy a custom pc but I would like some opinions on it first. Thanks for your time. https://www.microcenter.com/site/content/custom-pc-builder.aspx?load=df2fb985-47f3-4b3a-9cdb-68ccd88800a7
-
I could use some help finding where to plug in stuff on my new PC
I got the parts for my new PC (b650-e, x78003d, rtx4070 super, 16GB of DDR5 a 1kW PSU) well I cant find the ports for some of the cables, like I cant find where I'm supposed to plug in the power cable from the PSU to the CPU, I cant find all of the power ports for the PCIe slots, also I have managed to lose the papers that…
-
Does anyone happen to have the drivers accessible for the inland GM-76 mouse?
I currently don't have a disk drive and can't find the drivers online. The mouse is fully functional past the inability to program any of the features on it. If nothing comes of this search, I will likely find a way to put the drivers onto a USB and save it for if others may need them. —Disclaimer: I did reach out to tech…
-
Drivers for Windows installation.
Hello, Recently I purchased an Inland 1 terabyte TN450 NVMe SSD. After installing it into my computer, I booted into a Windows 10 x64 install USB. As soon as I clicked install, It prompted me that I needed a media driver, I have tried everything to get this to work, But nothing has done it. The SSD is detected in command…
-
Documentation or manufacturer of kit37in1 sensor kit?
Looking for sensor hookup and documentation for the Inland 37 in 1 sensor kit. It looks like keystudio kit but their site doesn't really have a doc that matches up real well.
-
Disassembly of an HP AIO 24-r124
Does anyone know how to remove the back cover of an HP Pavilion All in one 24-r124 to add additional ram?
-
I bought a CPU cooler but I want to return it
Can I return it within the 30 days and get a full refund or do I have 15 days? Do I need to bring my receipt and card that I paid with?
-
Sata SSD
I recently got a 2TB Inland Sata SSD When I plugged it into my computer it reads. But when I try to allocate it tells me that my drive does not exist. When I tried it on my older PC it still didn't work. I have tried to use other ports and cables. When I run a health check on it, it says the drive is healthy. Help?
-
Need help getting a run-through.
Hello, so I was looking towards buying the ASRock B650 PRO RS and saw that it doesnt have a wifi version. Would I need to purchase an additional Wifi card and insert it into the PCIE2 slot or would I need to purchase an M.2 Wifi card and place it in the M.2 Wifi holder? If so, please feel free to drop down any good wifi…
-
Argb Splitter Cable melting/ Smoking
I recently got new parts for my pc. After plugging everything in one of my cables started smoking. I turned it off and found that my arbg splitter cable had melted(specifically the cable attached to my pc cases drgb cable). I had plugged the splitter into my MSI b560 pro VDH wifi motherboard's jrainbow header. To add the…
-
Installed new SSD
Hello, decided to upgrade my laptops SSD. I physically installed a new M.2 SSD from Micro Center on my laptop on the only slot there is or where the old one was. I have a windows installation media in a USB and when I boot up the laptop, the windows install screen comes up but when I get to the screen where you select the…
-
Inland SSD firmware update - TN446 3D TLC NAND PCIe Gen4x4 NVMe M.2 2230
This firmware ELFMB0.7 is for updating Inland TN446 2230 SSD using Phison E21T controller. This firmware fixes possible permanent data loss issue but results in drop in attained performance in ATTO benchmark. Download the file above in your computer with Inland TN446 SSD installed and extract 3 files inside. Read the guide…
-
My PC powered on and off for a few seconds repediatley, and now it wont do anything?
Hello, I built a PC with parts from micro center: MSI B650-P PRO WiFi AMD AM5 ATX AMD Ryzen 7 7700X G.Skill Flare X5 Series 32GB (2 x 16GB) Lian Li Lancool II MESH Performance Type C Tempered Glass Seasonic USA Focus GX-850 (ATX3.0) 850 Watt PowerColor AMD Radeon RX 6800 XT Red Dragon I built the PC, turned it on, and the…
-
Inland NVME SSD Question. Utility?
Hi, I read in a previous post that it would appear that there is no SSD utility for the Inland SSD's, and the reason given was that it is because these are very basic, no frills SSD's. If this is the case, how does one handle Trim, as well as S.M.A.R.T. and other optimizations? Is there truly no consideration for these…
-
Looking for 20-30 inch touch screen monitors
If available, I want run apple Apps on the large touch screen. Is there an option?
-
Entire Desk Mousepad replacement for Inland Motorized Height-Adjustable Gaming Desk
This discussion was created from comments split from: Entire Desk Mousepad replacement for Inland Motorized Height-Adjustable Gaming Desk.
-
Ordering Off-Menu
Hi! I've been building pretty darn good computers for decades for myself and friends. I'm planning a new top shelf build for myself but Microcenter doesn't seem to carry many of the parts I'm interested in. I'd like to do my part to help Microcenter continue to grow and thrive in the Midwest region. If I can get an exact…
-
Recommendations for a solid UPS?
Hello all, Had a ton of power issues in my area recently, so I’m looking into getting a 1500VA UPS for my gaming PC (850W psu, i7-12700k and 3080 ti), a couple monitors, and my router, just enough to stay up for a good 10 min or so to let me shut everything down properly in event of an outage. True sine wave output would…
-
Very new to using WD Acronis True Image and cloning a hard drive
After the cloning, I remove the Source drive and swap in the target hard drive, should I also remove the Intel Optane chip before rebooting the computer? My desktop pc consists of a spinning HD and the Intel optane SSD to get to an advertised terabyte of storage. The software tells me the cloning operation was successful…
-
Inland TD510 2TB not linking at gen5
I got the Inland m.2 drive a couple days ago to do some Gen5 PCIe testing and found it is not linking up at Gen5. Actually worse, it doenst even link up at Gen4 unless I limit the port to only use Gen4. I believe something is happening in the jump from 4 to 5 during the PCIe ltssm where both sides tell each other they can…
-
looking for enclosure for seagate barracuda st340014as
The old enclosure has a USB 2.0 connection but the female receptor broke off the board. I have been going through old external hard drives and trying to get this one to work.
-
Hey.
Hello, recently my pc motherboard fried then it fried all my pc parts and I have no pc now. I need the pc for my work homework and gaming.This pc can help with anything and this is a opportunity to get a pc of a giveaway thanks.
-
How to connect Lian Li Lancool 205M Fans to B450M-A II Motherboard
I can't seem to figure out how to connect my Lian Li Lancool 205M Fans to the B450M-A II Motherboard. The fans come with 4pin female connectors for power and also 3 pin male/3 pin female connectors. The motherboard has am RGB header, but with all 4 pins. Is there any way to connect the fans to this mb? Thanks,
-
Will Micro Center help me build my pc?
I bought a prebuilt pc about a year ago. I recently upgraded the motherboard and cpu cooler. This new motherboard doesn’t have enough headers for the amount of fans I have. Also doesn’t have a header for my front panel audio ports. I think I need a fan hub for the fans or possibly some fans that can daisy chain together.…
-
MSI SPATIUM M480 not showing up in disk management
i just got my new ssd and its not showing up in disk management please help me
-
Re-pin a connector on a NWB fan 060155SS-24N 3 pin connectors
Does anyone in Denver have the parts (pins housing and female header connectors for JST 3 pin connectors. Or does anyone repair this type of connectors in Denver
-
Case Fan Question
I only have one spot in my case(92mm) where I can put a case fan, so is it better to have one intake case fan at the back, or a exhaust fan at the back? (my pc is ASUS ROG Strix GA15DK Gaming PC and changed the case fan from the default to a "be quiet PURE WINGS 2 Rifle Bearing 92mm Case Fan" that can be found in…
-
will certain parts would work in a new case?
So I have a prebuilt pc it is a acer predator orion 3000 and the cooling system is not the best on this computer. I was wondering if I could upgrade to a bigger case but i found out my mother board is a micro atx and I want a full tower case so I need to get a normal atx motherboard to fit the bigger case I have the two…
-
I just built my third computer and it doesnt boot
any idea how i can trouble shoot this because i have tried everything i can think off and nothing happens. The motherboard rgb lights up but nothing else turns on when the power button is held down.
-
Wiring Diagram and Example code for RPI 4-Channel Relay Shield
I just bought the "Inland RPI 4-Channel Relay 5V Shield for Raspberry Pi/ CE Certification" from Houston branch recently. It is a nice relay board to use on my Pi 3B+ and 4 following the reviewer code from one of the product review. But this HAT occupied all 40-pin without exhausting every GPIO pin. I would like to…
