Qwiic Indoor Air Quality Sensor - ENS160 gas sensor module
ID: 1183275
5906623419418
zł119.84
Tax included
zł97.43 tax excl.
ENS160 gas sensor module to measure the concentration of carbon dioxide (eCO2) and volatile organic compounds (TVOC) in the air. It communicates via an I2C or SPI interface. SparkFun SEN-20844
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
ENS160 gas sensor module. It is specifically designed for indoor air quality monitoring and offers detection of multiple parameters such as TVOC, eCO2, AQI. Innovative TrueVOC™ technology provides the sensor with superior accuracy, fast response and protection against interference. It can be widely used in many areas such as air quality detection, air purifiers and ventilation systems. It can work with systems with an operating voltage of 3.3 V, and communication is via an I2C interface (Qwiic connector) or SPI. Full documentation with examples are available on the product page.
Features
- Measurement range of eCO2: 400 to 65000 ppm
- TVOC measurement range: 0 to 65000 ppb
- Temperature measurement: -40 to 85°C
- Humidity measurement: 5 to 95%
- Compliant with IAQ standards for AQI, eCO2 and TVOC
- Moisture and ozone resistant
- Fully calibrated
- 2 x Qwiic connector
- I2C digital interface (address 0x52 or 0x53) or SPI
- Power supply: 3.3 V (VDD: 1.71 to 1.98 V, VDDIO: 1.71 to 3.6 V)
1183275
Data sheet
- Interface
- SPI/I2C
- Type of sensor
- ENS160
- Power supply voltage
- 1,71 - 3
- Concentration measurement
- VOC/CO2
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland [email protected] 22 767 36 20
You might also like
No product available!
Available
Available
Flexible Qwiic cable 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single male goldpin connectors. SparkFun PRT-17912
zł8.86
24h
Available quantity: 7
Available
Other products in the same category (16)
BME680 integrated gas, pressure, temperature and humidity sensor module housed in a single MEMS housing. It is equipped with an I2C and SPI interface. Waveshare BME680 Environmental Sensor
zł63.84
24h
Available quantity: 5
Available
PMS7003 is a kind of digital and universal particle concentration sensor, which can be used to obtain the number of suspended particles in the air, i.e. the concentration of particles, and output them in the form of digital interface
zł104.82
24h
Available quantity: 9
Available
Available
Laser sensor of air pollution with particles PM1,0, PM2.5 and PM10. It allows for precise analysis of the amount of pollutants in the environment, has small dimensions and a built-in silent transfer fan. Data is output to the UART interface. Planter PMSA003-C
zł103.05
24h
Available quantity: 3
Available
Total suspended particulate (TSP) sensor that allows you to measure the particle concentration from 1 to 100 μm. SDS198
zł435.31
24h
Available quantity: 3
Available
Air quality sensor module based on the SGP40 system. It uses CMOSens® technology by Sensirion and provides information on air quality. Waveshare SGP40 VOC Sensor
zł67.37
24h
Available quantity: 2
Available
Air quality sensor module based on the SGP40 system. It uses CMOSens technology by Sensirion and provides information on the concentration of volatile organic compounds (VOC). Adafruit 4829
zł84.40
24h
Available quantity: 2
Available
Air quality sensor module based on the SGP40 system. It communicates via the I2C interface. DFRobot SEN0392
zł82.10
24h
Available quantity: 1
Available
Available
BME688 integrated gas, pressure, temperature and humidity sensor module housed in a single MEMS package. It features a Grove connector and communicates via an I2C or SPI interface. Seeed Studio 114992989
zł184.49
24h
Available quantity: 1
Available
Air quality sensor module based on the ENS160 system. It communicates via the I2C or SPI interface. DFRobot SEN0515
zł77.42
24h
Available quantity: 4
Available
Sensirion\'s SEN54 sensor module, which combines a sensor that allows measurement of particulate matter, VOCs, humidity and temperature in a single housing. SparkFun SEN-19325
zł230.58
4 weeks
No product available!
Air quality sensor module based on the ENS160 system. It communicates via the I2C interface (Gravity connector). DFRobot SEN0514
zł102.62
24h
Available quantity: 2
Available
Module with gas sensor designed to monitor indoor air quality. It was based on the AMS CCS811 system that allows the detection of volatile organic compounds (VOCs) in the air. Digilent 410-386
zł174.70
24h
Available quantity: 1
Available
Laser sensor of air pollution with particles PM1,0, PM2.5 and PM10. It allows for precise analysis of the amount of pollutants in the environment, has small dimensions and a built-in silent transfer fan. Data is output to the UART interface. PMS3003
zł95.25
24h
Available quantity: 40
Available
Module dedicated to projects related to air quality monitoring. It uses the popular ENS160 and BME280 chips and provides a variety of environmental data such as Air Quality Index (AQI), TVOCs levels, CO2 equivalent (eCO2), atmospheric pressure, humidity and temperature. It communicates via the I2C interface and offers two Qwiic connectors. SparkFun SEN-22858
zł152.35
24h
Available quantity: 1
Available
ENS160 gas sensor module to measure the concentration of carbon dioxide (eCO2) and volatile organic compounds (TVOC) in the air. It communicates via an I2C or SPI interface. SparkFun SEN-20844