RonPub

Loading...

RonPub Banner

RonPub -- Research Online Publishing

RonPub (Research online Publishing) is an academic publisher of online, open access, peer-reviewed journals.  RonPub aims to provide a platform for researchers, developers, educators, and technical managers to share and exchange their research results worldwide.

RonPub Is Open Access:

RonPub publishes all of its journals under the open access model, defined under BudapestBerlin, and Bethesda open access declarations:

  • All articles published by RonPub is fully open access and online available to readers free of charge.  
  • All open access articles are distributed under  Creative Commons Attribution License,  which permits unrestricted use, distribution and reproduction free of charge in any medium, provided that the original work is properly cited. 
  • Authors retain all copyright to their work.
  • Authors may also publish the publisher's version of their paper on any repository or website. 

RonPub Is Cost-Effective:

To be able to provide open access journals, RonPub defray publishing cost by charging a one-time publication fee for each accepted article. One of RonPub objectives is providing a fast and high-quality but lower-cost publishing service. In order to ensure that the fee is never a barrier to publication, RonPub offers a fee waiver for authors who do not have funds to cover publication fees. We also offer a partial fee waiver for editors and reviewers of RonPub as as reward for their work. See the respective Journal webpage for the concrete publication fee.

RonPub Publication Criteria

What we are most concerned about is the quality, not quantity, of publications. We only publish high-quality scholarly papers. Publication Criteria describes the criteria that should be met for a contribution to be acceptable for publication in RonPub journals.

RonPub Publication Ethics Statement:

In order to ensure the publishing quality and the reputation of the publisher, it is important that all parties involved in the act of publishing adhere to the standards of the publishing ethical behaviour. To verify the originality of submissions, we use Plagiarism Detection Tools, like Anti-Plagiarism, PaperRater, Viper, to check the content of manuscripts submitted to our journals against existing publications.

RonPub follows the Code of Conduct of the Committee on Publication Ethics (COPE), and deals with the cases of misconduct according to the COPE Flowcharts

Long-Term Preservation in the German National Library

Our publications are archived and permanently-preserved in the German National Library. The publications, which are archived in the German National Library, are not only long-term preserved but also accessible in the future, because the German National Library ensures that digital data saved in the old formats can be viewed and used on current computer systems in the same way they were on the original systems which are long obsolete.

Where is RonPub?

RonPub is a registered corporation in Lübeck, Germany. Lübeck is a beautiful coastal city, owing wonderful sea resorts and sandy beaches as well as good restaurants. It is located in northern Germany and is 60 kilometer away from Hamburg.

OJCC Cover
Open Journal of Cloud Computing (OJCC)
OJCC, an open access and peer-reviewed online journal, publishes original and creative research results on cloud computing. OJCC distributes its articles under the open access model. All articles of OJCC are fully open access and online available to readers free of charge. There is no restriction on the length of the papers. Accepted manuscripts are published online immediately.
Publisher: RonPub UG (haftungsbeschränkt), Lübeck, Germany
Contact: OJCC Editorial Office
ISSN: 2199-1987
Call for Papers: txtUTF-8 txtASCII pdf
OJCC Cover
Open Journal of Cloud Computing (OJCC)
OJCC, an open access and peer-reviewed online journal, publishes original and creative research results on cloud computing. OJCC distributes its articles under the open access model. All articles of OJCC are fully open access and online available to readers free of charge. There is no restriction on the length of the papers. Accepted manuscripts are published online immediately.
Publisher: RonPub UG (haftungsbeschränkt), Lübeck, Germany
Contact: OJCC Editorial Office
ISSN: 2199-1987
Call for Papers: txtUTF-8 txtASCII pdf

Aims & Scope

In cloud scenarios, computing and storage resources are typically hidden from the user. Dependant on the demand of the resources of a user's application, different amount of resources can be used from a large pool of resources, which is shared among many users. Scalable applications are required, which can deal with the different amount of resources. The business model of cloud computing is often pay-per-use: You pay what you are using.

On the other hand, the current cloud scenarios are not always suitable to different types of applications. The new computing models are emerging in the past few years. These models can be summarized as CDEF, where C represents Cloudlet, D represents Dew Computing, E represents Edge Computing, and F represents Fog Computing. CDEF starts with C also implies that these four models all started from Cloud Computing. All CDEF can be classified as post-cloud computing models. While there are a few journals focused on cloud computing, OJCC is the first journal that is dedicated to post-cloud computing as well as cloud computing. OJCC provides an official publishing channel for post-cloud computing researchers, especially CDEF researchers.

OJCC publishes regular research papers, short communications, reviews and visionary papers in all aspects of cloud computing and post-cloud computing. There is no restriction on the length of the papers.

Regular Research Papers are full original findings with sufficient experimental research. They make substantial theoretical and empirical contributions to the research field. Research papers should be written as concise as possible.
Short Communications report novel research ideas. The work represented should be technically sound and significantly advancing the state of the art. Short communications also include exploratory studies and methodological articles.
Research Reviews are insightful and accessible overview of a certain field of research. They conceptualize research issues, synthesize existing findings and advance the understanding of the field. They may also suggest new research issues and directions.
Visionary Papers identify new research issues and future research directions, and describe new research visions in the field. The new visions will potentially have great impact for the future society and daily life. 

This journal deals with all the aspects of cloud computing and post-cloud computing. We except original and high quality submissions related (but not limited) to the following topics:

  • Hadoop
  • distributed file systems like HDFS
  • programming environments such as MapReduce
  • big data and clouds
  • public/private/hybrid/community cloud
  • cloud databases
  • cloud infrastructures
  • cloud scenarios
  • cloud applications
  • Infrastructure as a Service (IaaS)
  • Platform as a Service (PaaS)
  • Software as a Service (SaaS)
  • scalable on-demand services
  • virtualization of resources
  • business models
  • Post-cloud computing (CDEF) New
    • Cloudlet
    • Dew computing
    • Edge computing
    • Fog computing

Author Guidelines

Publication Criteria

Publication Criteria provides important information for authors to prepare their manuscripts with a high possibility of being accepted.

Manuscript Preparation

Please prepare your manuscripts using the manuscript template of the journal. It is available for download as word doc docx and latex version zip. The template describes the format and structure of manuscripts and other necessary information for preparing manuscripts. Manuscripts should be written in English. There is no restriction on the length of manuscripts.

Submission

Authors submit their manuscripts following the information on the submit pageAuthors first submit their manuscripts in PDF format. Once a manuscript is accepted, the author then submits the revised manuscript as a PDF file and a word file or latex folder (with all the material necessary to generate the PDF file). The work described in the submitted manuscript must be previously unpublished; it is not under consideration for publication anywhere else. 

Authors are welcome to suggest qualified reviewers for their papers, but this is not mandatory. If the author wants to do so, please provide the name, affiliations and e-mail addresses for all suggested reviewers.

Manuscript Status

After submission of manuscripts, authors will receive an email to confirm receipt of manuscripts. Subsequent enquiries concerning paper progress should be sent to the email address of the journal.

Review Procedure

OJCC is committed to enforcing a rigorous peer-review process. All manuscripts submitted for publication in OJCC are strictly and thoroughly peer-reviewed. When a manuscript is submitted, the editor-in-chief assigns it to an appropriate editor who will be in charge of the review process of the manuscript. The editor first suggests potential reviewers and then organizes the peer-reviewing herself/himself or entrusts it to the editor office. For each manuscript, typically three review reports will be collected. The editor and the editor-in-chief evaluate the manuscript itself and the review reports and make an accept/revision/reject decision. Authors will be informed with the decision and reviewing results within 6-8 weeks on average after the manuscript submission. In the case of revision, authors are required to perform an adequate revision to address the concerns from evaluation reports. A second round of peer-review will be performed if necessary.

Accepted manuscripts are published online immediately.

Copyrights

Authors publishing with RonPub open journals retain the copyright to their work. 

All articles published by RonPub is fully open access and online available to readers free of charge.  RonPub publishes all open access articles under the Creative Commons Attribution License,  which permits unrestricted use, distribution and reproduction freely, provided that the original work is properly cited.

Digital Archiving Policy

Our publications have been archived and permanently-preserved in the German National Library. The publications, which are archived in the German National Library, are not only long-term preserved but also accessible in the future, because the German National Library ensures that digital data saved in the old formats can be viewed and used on current computer systems in the same way they were on the original systems which are long obsolete. Further measures will be taken if necessary. Furthermore, we also encourage our authors to self-archive their articles published on the website of RonPub.

Publication Ethics Statement

In order to ensure the publishing quality and the reputation of the journal, it is important that all parties involved in the act of publishing adhere to the standards of the publishing ethical behaviour. To verify the originality of submissions, we use Plagiarism Detection Tools, like Anti-Plagiarism, PaperRater, Viper, to check the content of manuscripts submitted to our journals against existing publications.

Our journal follows the Code of Conduct of the Committee on Publication Ethics (COPE), and deals with the cases of misconduct according to the COPE Flowcharts

Articles of OJCC

Archive
Hide Archive Menu
Search Articles in OJCC

 Open Access 

Closing the Gap between Web Applications and Desktop Applications by Designing a Novel Desktop-as-a-Service (DaaS) with Seamless Support for Desktop Applications

Christian Baun, Johannes Bouche

Open Journal of Cloud Computing (OJCC), 8(1), Pages 1-19, 2023, Downloads: 22357

Full-Text: pdf | URN: urn:nbn:de:101:1-2023111918330784257276 | GNL-LP: 1310400962 | Meta-Data: tex xml rdf rss | Show/Hide Abstract | Show/Hide BibTex

Abstract: An increasing transformation from locally deployed applications to remote web applications has occurred for about two decades. Nevertheless, abandoning established and essential Windows or Linux desktop applications is in many scenarios impossible. This paper describes and evaluates existing Desktop-as-a-Service solutions and the components required for developing a novel DaaS. Based on the conclusions and findings of this analysis, the paper describes a novel approach for a Desktop-as-a-Service solution that enables, as a unique characteristic, the deployment of non-modified Linux and Windows applications. The interaction with these applications is done entirely through a browser which is unusual for remote interaction with Windows or Linux desktop applications but brings many benefits from the user's point of view because installing any additional client software or local virtualization solution becomes unnecessary. A solution, as described in this paper, has many advantages and offers excellent potential for use in academia, research, industry, and administration.

BibTex:

    @Article{OJCC_2023v8i1n01_Baun,
        title     = {Closing the Gap between Web Applications and Desktop Applications by Designing a Novel Desktop-as-a-Service (DaaS) with Seamless Support for Desktop Applications},
        author    = {Christian Baun and
                     Johannes Bouche},
        journal   = {Open Journal of Cloud Computing (OJCC)},
        issn      = {2199-1987},
        year      = {2023},
        volume    = {8},
        number    = {1},
        pages     = {1--19},
        url       = {http://nbn-resolving.de/urn:nbn:de:101:1-2023111918330784257276},
        urn       = {urn:nbn:de:101:1-2023111918330784257276},
        publisher = {RonPub},
        bibsource = {RonPub},
        abstract = {An increasing transformation from locally deployed applications to remote web applications has occurred for about two decades. Nevertheless, abandoning established and essential Windows or Linux desktop applications is in many scenarios impossible. This paper describes and evaluates existing Desktop-as-a-Service solutions and the components required for developing a novel DaaS. Based on the conclusions and findings of this analysis, the paper describes a novel approach for a  Desktop-as-a-Service solution that enables, as a unique characteristic, the deployment of non-modified Linux and Windows applications. The interaction with these applications is done entirely through a browser which is unusual for remote interaction with Windows or Linux desktop applications but brings many benefits from the user's point of view because installing any additional client software or local virtualization solution becomes unnecessary. A solution, as described in this paper, has many advantages and offers excellent potential for use in academia, research, industry, and administration.}
    }

 Open Access 

Hardware Accelerating the Optimization of Transaction Schedules via Quantum Annealing by Avoiding Blocking

Tim Bittner, Sven Groppe

Open Journal of Cloud Computing (OJCC), 7(1), Pages 1-21, 2020, Downloads: 2857

Full-Text: pdf | URN: urn:nbn:de:101:1-2020112218332015343957 | GNL-LP: 1221942670 | Meta-Data: tex xml rdf rss | Show/Hide Abstract | Show/Hide BibTex

Abstract: The isolation property of database theory guarantees to avoid problems of not synchronized parallel execution of several transactions. In this paper we propose an algorithm for an optimal transaction schedule for the different cores of a multi-core CPU with minimal execution time ensuring the isolation property. Optimizing the transaction schedule is a combinatorial problem, which is ideal to be solved by quantum annealers as special form of quantum computers. In our contribution we show how to transform an instance of the transaction schedule problem into a formula that is accepted by quantum annealers including a proof of validity and optimality of the obtained result. Furthermore, we analyze the number of required qubits and the preprocessing time, and introduce an approach for caching formulas as result of preprocessing for the purpose of reducing the preprocessing time. In an experimental evaluation, the runtime on a quantum annealer outperforms the runtime of traditional algorithms to solve combinatorial problems like simulated annealing already for small problem sizes.

BibTex:

    @Article{OJCC_2020v7i1n01_Bittner,
        title     = {Hardware Accelerating the Optimization of Transaction Schedules via Quantum Annealing by Avoiding Blocking},
        author    = {Tim Bittner and
                     Sven Groppe},
        journal   = {Open Journal of Cloud Computing (OJCC)},
        issn      = {2199-1987},
        year      = {2020},
        volume    = {7},
        number    = {1},
        pages     = {1--21},
        url       = {http://nbn-resolving.de/urn:nbn:de:101:1-2020112218332015343957},
        urn       = {urn:nbn:de:101:1-2020112218332015343957},
        publisher = {RonPub},
        bibsource = {RonPub},
        abstract = {The isolation property of database theory guarantees to avoid problems of not synchronized parallel execution of several transactions. In this paper we propose an algorithm for an optimal transaction schedule for the different cores of a multi-core CPU with minimal execution time ensuring the isolation property. Optimizing the transaction schedule is a combinatorial problem, which is ideal to be solved by quantum annealers as special form of quantum computers. In our contribution we show how to transform an instance of the transaction schedule problem into a formula that is accepted by quantum annealers including a proof of validity and optimality of the obtained result. Furthermore, we analyze the number of required qubits and the preprocessing time, and introduce an approach for caching formulas as result of preprocessing for the purpose of reducing the preprocessing time. In an experimental evaluation, the runtime on a quantum annealer outperforms the runtime of traditional algorithms to solve combinatorial problems like simulated annealing already for small problem sizes.}
    }

 Open Access 

Code Generation for Big Data Processing in the Web using WebAssembly

Sven Groppe, Niklas Reimer

Open Journal of Cloud Computing (OJCC), 6(1), Pages 1-15, 2019, Downloads: 4140

Full-Text: pdf | URN: urn:nbn:de:101:1-2020011918330924188531 | GNL-LP: 1203064667 | Meta-Data: tex xml rdf rss | Show/Hide Abstract | Show/Hide BibTex

Abstract: Traditional clusters for cloud computing are quite hard to configure and setup, and the number of cluster nodes is limited by the available hardware in the cluster. We hence envision the concept of a Browser Cloud: One just has to visit with his/her web browser a certain webpage in order to connect his/her computer to the Browser Cloud. In this way the setup of the Browser Cloud is much easier than those of traditional clouds. Furthermore, the Browser Cloud has a much larger number of potential nodes, as any computer running a browser may connect to and be integrated in the Browser Cloud. New challenges arise when setting up a cloud by web browsers: Data is processed within the browser, which requires to use the technologies offered by the browser for this purpose. The typically used JavaScript runtime environment may be too slow, because JavaScript is an interpreted language. Hence we investigate the possibilities for computing the work-intensive part of the query processing inside a virtual machine of the web browser. The technology WebAssemby for virtual machines is recently supported by all major browsers and promises high speedups in comparison with JavaScript. Recent approaches to efficient Big Data processing generate code for the data processing steps of queries. To run the generated code in a WebAssembly virtual machine, an online compiler is needed to generate the WebAssembly bytecode from the generated code. Hence our main contribution is an online compiler to WebAssembly bytecode especially developed to run in the web browser and for Big Data processing based on code generation of the processing steps. In our experiments, the runtimes of Big Data processing using JavaScript is compared with running WebAssembly technologies in the major web browsers.

BibTex:

    @Article{OJCC_2019v6i1n01_Groppe,
        title     = {Code Generation for Big Data Processing in the Web using WebAssembly},
        author    = {Sven Groppe and
                     Niklas Reimer},
        journal   = {Open Journal of Cloud Computing (OJCC)},
        issn      = {2199-1987},
        year      = {2019},
        volume    = {6},
        number    = {1},
        pages     = {1--15},
        url       = {http://nbn-resolving.de/urn:nbn:de:101:1-2020011918330924188531},
        urn       = {urn:nbn:de:101:1-2020011918330924188531},
        publisher = {RonPub},
        bibsource = {RonPub},
        abstract = {Traditional clusters for cloud computing are quite hard to configure and setup, and the number of cluster nodes is limited by the available hardware in the cluster. We hence envision the concept of a Browser Cloud: One just has to visit with his/her web browser a certain webpage in order to connect his/her computer to the Browser Cloud. In this way the setup of the Browser Cloud is much easier than those of traditional clouds. Furthermore, the Browser Cloud has a much larger number of potential nodes, as any computer running a browser may connect to and be integrated in the Browser Cloud. New challenges arise when setting up a cloud by web browsers: Data is processed within the browser, which requires to use the technologies offered by the browser for this purpose. The typically used JavaScript runtime environment may be too slow, because JavaScript is an interpreted language. Hence we investigate the possibilities for computing the work-intensive part of the query processing inside a virtual machine of the web browser. The technology WebAssemby for virtual machines is recently supported by all major browsers and promises high speedups in comparison with JavaScript. Recent approaches to efficient Big Data processing generate code for the data processing steps of queries. To run the generated code in a WebAssembly virtual machine, an online compiler is needed to generate the WebAssembly bytecode from the generated code. Hence our main contribution is an online compiler to WebAssembly bytecode especially developed to run in the web browser and for Big Data processing based on code generation of the processing steps. In our experiments, the runtimes of Big Data processing using JavaScript is compared with running WebAssembly technologies in the major web browsers.}
    }

 Open Access 

Cyber Supply Chain Risks in Cloud Computing - Bridging the Risk Assessment Gap

Olusola Akinrolabu, Steve New, Andrew Martin

Open Journal of Cloud Computing (OJCC), 5(1), Pages 1-19, 2018, Downloads: 10777

Full-Text: pdf | URN: urn:nbn:de:101:1-201712245432 | GNL-LP: 1149497157 | Meta-Data: tex xml rdf rss | Show/Hide Abstract | Show/Hide BibTex

Abstract: Cloud computing represents a significant paradigm shift in the delivery of information technology (IT) services. The rapid growth of the cloud and the increasing security concerns associated with the delivery of cloud services has led many researchers to study cloud risks and risk assessments. Some of these studies highlight the inability of current risk assessments to cope with the dynamic nature of the cloud, a gap we believe is as a result of the lack of consideration for the inherent risk of the supply chain. This paper, therefore, describes the cloud supply chain and investigates the effect of supply chain transparency in conducting a comprehensive risk assessment. We conducted an industry survey to gauge stakeholder awareness of supply chain risks, seeking to find out the risk assessment methods commonly used, factors that hindered a comprehensive evaluation and how the current state-of-the-art can be improved. The analysis of the survey dataset showed the lack of flexibility of the popular qualitative assessment methods in coping with the risks associated with the dynamic supply chain of cloud services, typically made up of an average of eight suppliers. To address these gaps, we propose a Cloud Supply Chain Cyber Risk Assessment (CSCCRA) model, a quantitative risk assessment model which is supported by decision support analysis and supply chain mapping in the identification, analysis and evaluation of cloud risks.

BibTex:

    @Article{OJCC_2018v5i1n01_Akinrolabu,
        title     = {Cyber Supply Chain Risks in Cloud Computing - Bridging the Risk Assessment Gap},
        author    = {Olusola Akinrolabu and
                     Steve New and
                     Andrew Martin},
        journal   = {Open Journal of Cloud Computing (OJCC)},
        issn      = {2199-1987},
        year      = {2018},
        volume    = {5},
        number    = {1},
        pages     = {1--19},
        url       = {http://nbn-resolving.de/urn:nbn:de:101:1-201712245432},
        urn       = {urn:nbn:de:101:1-201712245432},
        publisher = {RonPub},
        bibsource = {RonPub},
        abstract = {Cloud computing represents a significant paradigm shift in the delivery of information technology (IT) services. The rapid growth of the cloud and the increasing security concerns associated with the delivery of cloud services has led many researchers to study cloud risks and risk assessments. Some of these studies highlight the inability of current risk assessments to cope with the dynamic nature of the cloud, a gap we believe is as a result of the lack of consideration for the inherent risk of the supply chain. This paper, therefore, describes the cloud supply chain and investigates the effect of supply chain transparency in conducting a comprehensive risk assessment. We conducted an industry survey to gauge stakeholder awareness of supply chain risks, seeking to find out the risk assessment methods commonly used, factors that hindered a comprehensive evaluation and how the current state-of-the-art can be improved. The analysis of the survey dataset showed the lack of flexibility of the popular qualitative assessment methods in coping with the risks associated with the dynamic supply chain of cloud services, typically made up of an average of eight suppliers. To address these gaps, we propose a Cloud Supply Chain Cyber Risk Assessment (CSCCRA) model, a quantitative risk assessment model which is supported by decision support analysis and supply chain mapping in the identification, analysis and evaluation of cloud risks.}
    }

 Open Access 

A Lightweight Network-Controlled Power Strip for Low-Cost Cluster Systems

Henry-Norbert Cocos, Christian Baun

Open Journal of Cloud Computing (OJCC), 5(1), Pages 20-29, 2018, Downloads: 4032

Full-Text: pdf | URN: urn:nbn:de:101:1-2018080519300682402240 | GNL-LP: 1163928445 | Meta-Data: tex xml rdf rss | Show/Hide Abstract | Show/Hide BibTex

Abstract: Low-cost clusters are not equipped with costly, sophisticated tools and cannot be controlled remotely. This work aims at addressing this issue and develops a lightweight network-controlled power strip, which enables administrators to monitor the cluster and perform operation via remote. The power strip is controlled via a web interface and a RESTful web service, which are implemented with the programming language Python and the web framework Flask. The solution is inexpensive and easy to implement and use. In this paper, we describe in detail the development and construction of the prototype of the solution and discuss its purchase cost and power consumption.

BibTex:

    @Article{OJCC_2018v5i1n02_Cocos,
        title     = {A Lightweight Network-Controlled Power Strip for Low-Cost Cluster Systems},
        author    = {Henry-Norbert Cocos and
                     Christian Baun},
        journal   = {Open Journal of Cloud Computing (OJCC)},
        issn      = {2199-1987},
        year      = {2018},
        volume    = {5},
        number    = {1},
        pages     = {20--29},
        url       = {http://nbn-resolving.de/urn:nbn:de:101:1-2018080519300682402240},
        urn       = {urn:nbn:de:101:1-2018080519300682402240},
        publisher = {RonPub},
        bibsource = {RonPub},
        abstract = {Low-cost clusters are not equipped with costly, sophisticated tools and cannot be controlled remotely. This work aims at addressing this issue and develops a lightweight network-controlled power strip, which enables administrators to monitor the cluster and perform operation via remote. The power strip is controlled via a web interface and a RESTful web service, which are implemented with the programming language Python and the web framework Flask. The solution is inexpensive and easy to implement and use. In this paper, we describe in detail the development and construction of the prototype of the solution and discuss its purchase cost and power consumption.}
    }

 Open Access 

Performance Aspects of Object-based Storage Services on Single Board Computers

Christian Baun, Henry-Norbert Cocos, Rosa-Maria Spanou

Open Journal of Cloud Computing (OJCC), 4(1), Pages 1-16, 2017, Downloads: 5734

Full-Text: pdf | URN: urn:nbn:de:101:1-2017100112204 | GNL-LP: 1140718231 | Meta-Data: tex xml rdf rss | Show/Hide Abstract | Show/Hide BibTex

Abstract: When an object-based storage service is demanded and the cost for purchase and operation of servers, workstations or personal computers is a challenge, single board computers may be an option to build an inexpensive system. This paper describes the lessons learned from deploying different private cloud storage services, which implement the functionality and API of the Amazon Simple Storage Service on a single board computer, the development of a lightweight tool to investigate the performance and an analysis of the archived measurement data. The objective of the performance evaluation is to get an impression, if it is possible and useful to deploy object-based storage services on single board computers.

BibTex:

    @Article{OJCC_2017v4i1n01_Baun,
        title     = {Performance Aspects of Object-based Storage Services on Single Board Computers},
        author    = {Christian Baun and
                     Henry-Norbert Cocos and
                     Rosa-Maria Spanou},
        journal   = {Open Journal of Cloud Computing (OJCC)},
        issn      = {2199-1987},
        year      = {2017},
        volume    = {4},
        number    = {1},
        pages     = {1--16},
        url       = {http://nbn-resolving.de/urn:nbn:de:101:1-2017100112204},
        urn       = {urn:nbn:de:101:1-2017100112204},
        publisher = {RonPub},
        bibsource = {RonPub},
        abstract = {When an object-based storage service is demanded and the cost for purchase and operation of servers, workstations or personal computers is a challenge, single board computers may be an option to build an inexpensive system. This paper describes the lessons learned from deploying different private cloud storage services, which implement the functionality and API of the Amazon Simple Storage Service on a single board computer, the development of a lightweight tool to investigate the performance and an analysis of the archived measurement data. The objective of the performance evaluation is to get an impression, if it is possible and useful to deploy object-based storage services on single board computers.}
    }

 Open Access 

Security and Compliance Ontology for Cloud Service Agreements

Ana Sofía Zalazar, Luciana Ballejos, Sebastian Rodriguez

Open Journal of Cloud Computing (OJCC), 4(1), Pages 17-25, 2017, Downloads: 4708, Citations: 2

Full-Text: pdf | URN: urn:nbn:de:101:1-2017100112242 | GNL-LP: 1140718274 | Meta-Data: tex xml rdf rss | Show/Hide Abstract | Show/Hide BibTex

Abstract: Cloud computing is a business paradigm where two important roles must be defined: provider and consumer. Providers offer services (e.g. web application, web services, and databases) and consumers pay for using them. The goal of this research is to focus on security and compliance aspects of cloud service. An ontology is introduced, which is the conceptualization of cloud domain, for analyzing different compliance aspects of cloud agreements. The terms, properties and relations are shown in a diagram. The proposed ontology can help service consumers to extract relevant data from service level agreements, to interpret compliance regulations, and to compare different contractual terms. Finally, some recommendations are presented for cloud consumers to adopt services and evaluate security risks.

BibTex:

    @Article{OJCC_2017v4i1n02_Zalazar,
        title     = {Security and Compliance Ontology for Cloud Service Agreements},
        author    = {Ana Sof\'{i}a Zalazar and
                     Luciana Ballejos and
                     Sebastian Rodriguez},
        journal   = {Open Journal of Cloud Computing (OJCC)},
        issn      = {2199-1987},
        year      = {2017},
        volume    = {4},
        number    = {1},
        pages     = {17--25},
        url       = {http://nbn-resolving.de/urn:nbn:de:101:1-2017100112242},
        urn       = {urn:nbn:de:101:1-2017100112242},
        publisher = {RonPub},
        bibsource = {RonPub},
        abstract = {Cloud computing is a business paradigm where two important roles must be defined: provider and consumer. Providers offer services (e.g. web application, web services, and databases) and consumers pay for using them. The goal of this research is to focus on security and compliance aspects of cloud service. An ontology is introduced, which is the conceptualization of cloud domain, for analyzing different compliance aspects of cloud agreements. The terms, properties and relations are shown in a diagram. The proposed ontology can help service consumers to extract relevant data from service level agreements, to interpret compliance regulations, and to compare different contractual terms. Finally, some recommendations are presented for cloud consumers to adopt services and evaluate security risks.}
    }

 Open Access 

Definition and Categorization of Dew Computing

Yingwei Wang

Open Journal of Cloud Computing (OJCC), 3(1), Pages 1-7, 2016, Downloads: 12742, Citations: 69

Full-Text: pdf | URN: urn:nbn:de:101:1-201705194546 | GNL-LP: 1132360781 | Meta-Data: tex xml rdf rss | Show/Hide Abstract | Show/Hide BibTex

Abstract: Dew computing is an emerging new research area and has great potentials in applications. In this paper, we propose a revised definition of dew computing. The new definition is: Dew computing is an on-premises computer software-hardware organization paradigm in the cloud computing environment where the on-premises computer provides functionality that is independent of cloud services and is also collaborative with cloud services. The goal of dew computing is to fully realize the potentials of on-premises computers and cloud services. This definition emphasizes two key features of dew computing: independence and collaboration. Furthermore, we propose a group of dew computing categories. These categories may inspire new applications.

BibTex:

    @Article{OJCC_2016v3i1n02_YingweiWang,
        title     = {Definition and Categorization of Dew Computing},
        author    = {Yingwei Wang},
        journal   = {Open Journal of Cloud Computing (OJCC)},
        issn      = {2199-1987},
        year      = {2016},
        volume    = {3},
        number    = {1},
        pages     = {1--7},
        url       = {http://nbn-resolving.de/urn:nbn:de:101:1-201705194546},
        urn       = {urn:nbn:de:101:1-201705194546},
        publisher = {RonPub},
        bibsource = {RonPub},
        abstract = {Dew computing is an emerging new research area and has great potentials in applications. In this paper, we propose a revised definition of dew computing. The new definition is: Dew computing is an on-premises computer software-hardware organization paradigm in the cloud computing environment where the on-premises computer provides functionality that is independent of cloud services and is also collaborative with cloud services. The goal of dew computing is to fully realize the potentials of on-premises computers and cloud services. This definition emphasizes two key features of dew computing: independence and collaboration. Furthermore, we propose a group of dew computing categories. These categories may inspire new applications.}
    }

 Open Access 

Doing More with the Dew: A New Approach to Cloud-Dew Architecture

David Edward Fisher, Shuhui Yang

Open Journal of Cloud Computing (OJCC), 3(1), Pages 8-19, 2016, Downloads: 9917, Citations: 9

Full-Text: pdf | URN: urn:nbn:de:101:1-201705194535 | GNL-LP: 1132360773 | Meta-Data: tex xml rdf rss | Show/Hide Abstract | Show/Hide BibTex

Abstract: While the popularity of cloud computing is exploding, a new network computing paradigm is just beginning. In this paper, we examine this exciting area of research known as dew computing and propose a new design of cloud-dew architecture. Instead of hosting only one dew server on a user's PC - as adopted in the current dewsite application - our design promotes the hosting of multiple dew servers instead, one for each installed domain. Our design intends to improve upon existing cloud-dew architecture by providing significantly increased freedom in dewsite development, while also automating the chore of managing dewsite content based on the user's interests and browsing habits. Other noteworthy benefits, all at no added cost to dewsite users, are briefly explored as well.

BibTex:

    @Article{OJCC_2016v3i1n02_Fisher,
        title     = {Doing More with the Dew: A New Approach to Cloud-Dew Architecture},
        author    = {David Edward Fisher and
                     Shuhui Yang},
        journal   = {Open Journal of Cloud Computing (OJCC)},
        issn      = {2199-1987},
        year      = {2016},
        volume    = {3},
        number    = {1},
        pages     = {8--19},
        url       = {http://nbn-resolving.de/urn:nbn:de:101:1-201705194535},
        urn       = {urn:nbn:de:101:1-201705194535},
        publisher = {RonPub},
        bibsource = {RonPub},
        abstract = {While the popularity of cloud computing is exploding, a new network computing paradigm is just beginning. In this paper, we examine this exciting area of research known as dew computing and propose a new design of cloud-dew architecture. Instead of hosting only one dew server on a user's PC - as adopted in the current dewsite application - our design promotes the hosting of multiple dew servers instead, one for each installed domain. Our design intends to improve upon existing cloud-dew architecture by providing significantly increased freedom in dewsite development, while also automating the chore of managing dewsite content based on the user's interests and browsing habits. Other noteworthy benefits, all at no added cost to dewsite users, are briefly explored as well.}
    }

 Open Access 

Advances in Cloud and Ubiquitous Computing

Sven Groppe, K. Chandrasekaran

Open Journal of Cloud Computing (OJCC), 2(2), Pages 1-3, 2015, Downloads: 7252

Full-Text: pdf | URN: urn:nbn:de:101:1-201704229173 | GNL-LP: 1130488268 | Meta-Data: tex xml rdf rss | Show/Hide Abstract | Show/Hide BibTex

Abstract: Cloud computing provides on-demand access to a shared pool of configurable and dynamically reallocated computing resources typically located in third-party data centers. Ubiquitous computing aims at providing computing resources anytime and everywhere by using any device, in any location, and in any format. This special issue, Advances in Cloud and Ubiquitous Computing (ACUC), aims at addressing the challenges and reporting the latest research findings in the fields of Cloud computing and Ubiquitous Computing respectively, and how new technologies of Cloud Computing and Ubiquitous Computing complete each other.

BibTex:

    @Article{OJCC_2015v2i2n01e_Groppe,
        title     = {Advances in Cloud and Ubiquitous Computing},
        author    = {Sven Groppe and
                     K. Chandrasekaran},
        journal   = {Open Journal of Cloud Computing (OJCC)},
        issn      = {2199-1987},
        year      = {2015},
        volume    = {2},
        number    = {2},
        pages     = {1--3},
        url       = {http://nbn-resolving.de/urn:nbn:de:101:1-201704229173},
        urn       = {urn:nbn:de:101:1-201704229173},
        publisher = {RonPub},
        bibsource = {RonPub},
        abstract = {Cloud computing provides on-demand access to a shared pool of configurable and dynamically reallocated computing resources typically located in third-party data centers. Ubiquitous computing aims at providing computing resources anytime and everywhere by using any device, in any location, and in any format. This special issue, Advances in Cloud and Ubiquitous Computing (ACUC), aims at addressing the challenges and reporting the latest research findings in the fields of Cloud computing and Ubiquitous Computing respectively, and how new technologies of Cloud Computing and Ubiquitous Computing complete each other.}
    }

 Open Access 

Cooperative Hybrid Cloud Intermediaries - Making Cloud Sourcing Feasible for Small and Medium-sized Enterprises

Till Haselmann, Gottfried Vossen, Stuart Dillon

Open Journal of Cloud Computing (OJCC), 2(2), Pages 4-20, 2015, Downloads: 4594, Citations: 3

Full-Text: pdf | URN: urn:nbn:de:101:1-201705194494 | GNL-LP: 1132360714 | Meta-Data: tex xml rdf rss | Show/Hide Abstract | Show/Hide BibTex

Abstract: "The cloud" is widely advertised as a silver bullet for many IT-related challenges of small and medium-sized enterprises (SMEs). While it can potentially have a number of attractive benefits, many SMEs refrain from using cloud sourcing and cloud services because of high upfront costs for building the appropriate knowledge in the enterprise, for searching and screening of possible cloud service providers, and for mastering the intricate legal issues related to outsourcing sensitive data. This paper presents the concept of hybrid cloud intermediaries, an approach that can address many of the prevailing issues. With the aid of empirical findings from a cross-nation study of cloud adoption in SMEs for context, we describe the concept in detail and show conceivable variants, including a comprehensive cross-perspective consolidated model of cloud intermediary value-creation. Subsequently, we analyze the benefits of such a hybrid cloud intermediary for addressing cloud adoption issues in SMEs, and suggest suitable governance structures based on the cooperative paradigm. The resulting entity - a cooperative hybrid cloud intermediary or, more concisely, co-op cloud - is discussed in detail showing both feasible scenarios and limitations for SMEs that would like to engage in a cloud-sourcing.

BibTex:

    @Article{OJCC_2015v2i2n02_Haselmann,
        title     = {Cooperative Hybrid Cloud Intermediaries - Making Cloud Sourcing Feasible for Small and Medium-sized Enterprises},
        author    = {Till Haselmann and
                     Gottfried Vossen and
                     Stuart Dillon},
        journal   = {Open Journal of Cloud Computing (OJCC)},
        issn      = {2199-1987},
        year      = {2015},
        volume    = {2},
        number    = {2},
        pages     = {4--20},
        url       = {http://nbn-resolving.de/urn:nbn:de:101:1-201705194494},
        urn       = {urn:nbn:de:101:1-201705194494},
        publisher = {RonPub},
        bibsource = {RonPub},
        abstract = {"The cloud" is widely advertised as a silver bullet for many IT-related challenges of small and medium-sized enterprises (SMEs). While it can potentially have a number of attractive benefits, many SMEs refrain from using cloud sourcing and cloud services because of high upfront costs for building the appropriate knowledge in the enterprise, for searching and screening of possible cloud service providers, and for mastering the intricate legal issues related to outsourcing sensitive data. This paper presents the concept of hybrid cloud intermediaries, an approach that can address many of the prevailing issues. With the aid of empirical findings from a cross-nation study of cloud adoption in SMEs for context, we describe the concept in detail and show conceivable variants, including a comprehensive cross-perspective consolidated model of cloud intermediary value-creation. Subsequently, we analyze the benefits of such a hybrid cloud intermediary for addressing cloud adoption issues in SMEs, and suggest suitable governance structures based on the cooperative paradigm. The resulting entity - a cooperative hybrid cloud intermediary or, more concisely, co-op cloud - is discussed in detail showing both feasible scenarios and limitations for SMEs that would like to engage in a cloud-sourcing.}
    }

 Open Access 

A Trust-Based Approach for Management of Dynamic QoS Violations in Cloud Federation Environments

Manoj V. Thomas, K. Chandrasekaran

Open Journal of Cloud Computing (OJCC), 2(2), Pages 21-43, 2015, Downloads: 5994, Citations: 2

Full-Text: pdf | URN: urn:nbn:de:101:1-201705194523 | GNL-LP: 1132360765 | Meta-Data: tex xml rdf rss | Show/Hide Abstract | Show/Hide BibTex

Abstract: Cloud Federation is an emerging technology where Cloud Service Providers (CSPs) offering specialized services to customers collaborate in order to reap the real benefits of Cloud Computing. When a CSP in the Cloud Federation runs out of resources, it can get the required resources from other partners in the federation. Normally, there will be QoS agreements between the partners in the federation for the resource sharing. In this paper, we propose a trust based mechanism for the management of dynamic QoS violations, when one CSP requests resources from another CSP in the federation. In this work, we have implemented the partner selection process, when one CSP does not have enough resources, using the Analytic Hierarchy Process (AHP) and the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) methods, and also considering the trust values of various CSPs in the federation. We have also implemented the Single Sign-On (SSO) authentication in the cloud federation using the Fully Hashed Menezes-Qu-Vanstone (FHMQV) protocol and AES-256 algorithm. The proposed trust-based approach is used to dynamically manage the QoS violations among the partners in the federation. We have implemented the proposed approach using the CloudSim toolkit, and the analysis of the results are also given.

BibTex:

    @Article{OJCC_2015v2i2n03_Thomas,
        title     = {A Trust-Based Approach for Management of Dynamic QoS Violations in Cloud Federation Environments},
        author    = {Manoj V. Thomas and
                     K. Chandrasekaran},
        journal   = {Open Journal of Cloud Computing (OJCC)},
        issn      = {2199-1987},
        year      = {2015},
        volume    = {2},
        number    = {2},
        pages     = {21--43},
        url       = {http://nbn-resolving.de/urn:nbn:de:101:1-201705194523},
        urn       = {urn:nbn:de:101:1-201705194523},
        publisher = {RonPub},
        bibsource = {RonPub},
        abstract = {Cloud Federation is an emerging technology where Cloud Service Providers (CSPs) offering specialized services to customers collaborate in order to reap the real benefits of Cloud Computing. When a CSP in the Cloud Federation runs out of resources, it can get the required resources from other partners in the federation. Normally, there will be QoS agreements between the partners in the federation for the resource sharing. In this paper, we propose a trust based mechanism for the management of dynamic QoS violations, when one CSP requests resources from another CSP in the federation. In this work, we have implemented the partner selection process, when one CSP does not have enough resources, using the Analytic Hierarchy Process (AHP) and the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) methods, and also considering the trust values of various CSPs in the federation. We have also implemented the Single Sign-On (SSO) authentication in the cloud federation using the Fully Hashed Menezes-Qu-Vanstone (FHMQV) protocol and AES-256 algorithm. The proposed trust-based approach is used to dynamically manage the QoS violations among the partners in the federation. We have implemented the proposed approach using the CloudSim toolkit, and the analysis of the results are also given.}
    }

 Open Access 

Emerging Software as a Service and Analytics

Victor Chang, Robert John Walters, Gary B. Wills

Open Journal of Cloud Computing (OJCC), 2(1), Pages 1-3, 2015, Downloads: 4842

Full-Text: pdf | URN: urn:nbn:de:101:1-201705194461 | GNL-LP: 1132360641 | Meta-Data: tex xml rdf rss | Show/Hide Abstract | Show/Hide BibTex

Abstract: This special issue of Open Journal of Cloud Computing (OJCC) (www.ronpub.com/journals/ojcc) reports work in the field of emerging software as a service and analytics, and presents innovative approaches to delivering software services in research and enterprise communities. It contains extended versions of papers selected from the international workshop on Emerging Software as a Service and Analytices (ESaaSA) in association with the international conference on cloud computing and serviced science taken place in Barcelona, Spain during April 2014. OJCC is published by RonPub (www.ronpub.com), which is an academic publisher of online, open access, peer-reviewed journals.

BibTex:

    @Article{OJCC_2015v2i1n01e_Chang,
        title     = {Emerging Software as a Service and Analytics},
        author    = {Victor Chang and
                     Robert John Walters and
                     Gary B. Wills},
        journal   = {Open Journal of Cloud Computing (OJCC)},
        issn      = {2199-1987},
        year      = {2015},
        volume    = {2},
        number    = {1},
        pages     = {1--3},
        url       = {http://nbn-resolving.de/urn:nbn:de:101:1-201705194461},
        urn       = {urn:nbn:de:101:1-201705194461},
        publisher = {RonPub},
        bibsource = {RonPub},
        abstract = {This special issue of Open Journal of Cloud Computing (OJCC) (www.ronpub.com/journals/ojcc) reports work in the field of emerging software as a service and analytics, and presents innovative approaches to delivering software services in research and enterprise communities. It contains extended versions of papers selected from the international workshop on Emerging Software as a Service and Analytices (ESaaSA) in association with the international conference on cloud computing and serviced science taken place in Barcelona, Spain during April 2014. OJCC is published by RonPub (www.ronpub.com), which is an academic publisher of online, open access, peer-reviewed journals.}
    }

 Open Access 

An Analytical Model of Multi-Core Multi-Cluster Architecture (MCMCA)

Norhazlina Hamid, Robert John Walters, Gary B. Wills

Open Journal of Cloud Computing (OJCC), 2(1), Pages 4-15, 2015, Downloads: 10912, Citations: 5

Full-Text: pdf | URN: urn:nbn:de:101:1-201705194487 | GNL-LP: 1132360692 | Meta-Data: tex xml rdf rss | Show/Hide Abstract | Show/Hide BibTex

Abstract: Multi-core clusters have emerged as an important contribution in computing technology for provisioning additional processing power in high performance computing and communications. Multi-core architectures are proposed for their capability to provide higher performance without increasing heat and power usage, which is the main concern in a single-core processor. This paper introduces analytical models of a new architecture for large-scale multi-core clusters to improve the communication performance within the interconnection network. The new architecture will be based on a multi - cluster architecture containing clusters of multi-core processors.

BibTex:

    @Article{OJCC_2015v2i1n02_Hamid,
        title     = {An Analytical Model of Multi-Core Multi-Cluster Architecture (MCMCA)},
        author    = {Norhazlina Hamid and
                     Robert John Walters and
                     Gary B. Wills},
        journal   = {Open Journal of Cloud Computing (OJCC)},
        issn      = {2199-1987},
        year      = {2015},
        volume    = {2},
        number    = {1},
        pages     = {4--15},
        url       = {http://nbn-resolving.de/urn:nbn:de:101:1-201705194487},
        urn       = {urn:nbn:de:101:1-201705194487},
        publisher = {RonPub},
        bibsource = {RonPub},
        abstract = {Multi-core clusters have emerged as an important contribution in computing technology for provisioning additional processing power in high performance computing and communications. Multi-core architectures are proposed for their capability to provide higher performance without increasing heat and power usage, which is the main concern in a single-core processor. This paper introduces analytical models of a new architecture for large-scale multi-core clusters to improve the communication performance within the interconnection network. The new architecture will be based on a multi - cluster architecture containing clusters of multi-core processors.}
    }

 Open Access 

Scalable Distributed Computing Hierarchy: Cloud, Fog and Dew Computing

Karolj Skala, Davor Davidovic, Enis Afgan, Ivan Sovic, Zorislav Sojat

Open Journal of Cloud Computing (OJCC), 2(1), Pages 16-24, 2015, Downloads: 21342, Citations: 168

Full-Text: pdf | URN: urn:nbn:de:101:1-201705194519 | GNL-LP: 1132360749 | Meta-Data: tex xml rdf rss | Show/Hide Abstract | Show/Hide BibTex

Abstract: The paper considers the conceptual approach for organization of the vertical hierarchical links between the scalable distributed computing paradigms: Cloud Computing, Fog Computing and Dew Computing. In this paper, the Dew Computing is described and recognized as a new structural layer in the existing distributed computing hierarchy. In the existing computing hierarchy, the Dew computing is positioned as the ground level for the Cloud and Fog computing paradigms. Vertical, complementary, hierarchical division from Cloud to Dew Computing satisfies the needs of high- and low-end computing demands in everyday life and work. These new computing paradigms lower the cost and improve the performance, particularly for concepts and applications such as the Internet of Things (IoT) and the Internet of Everything (IoE). In addition, the Dew computing paradigm will require new programming models that will efficiently reduce the complexity and improve the productivity and usability of scalable distributed computing, following the principles of High-Productivity computing.

BibTex:

    @Article{OJCC_2015v2i1n03_Skala,
        title     = {Scalable Distributed Computing Hierarchy: Cloud, Fog and Dew Computing},
        author    = {Karolj Skala and
                     Davor Davidovic and
                     Enis Afgan and
                     Ivan Sovic and
                     Zorislav Sojat},
        journal   = {Open Journal of Cloud Computing (OJCC)},
        issn      = {2199-1987},
        year      = {2015},
        volume    = {2},
        number    = {1},
        pages     = {16--24},
        url       = {http://nbn-resolving.de/urn:nbn:de:101:1-201705194519},
        urn       = {urn:nbn:de:101:1-201705194519},
        publisher = {RonPub},
        bibsource = {RonPub},
        abstract = {The paper considers the conceptual approach for organization of the vertical hierarchical links between the scalable distributed computing paradigms: Cloud Computing, Fog Computing and Dew Computing. In this paper, the Dew Computing is described and recognized as a new structural layer in the existing distributed computing hierarchy. In the existing computing hierarchy, the Dew computing is positioned as the ground level for the Cloud and Fog computing paradigms. Vertical, complementary, hierarchical division from Cloud to Dew Computing satisfies the needs of high- and low-end computing demands in everyday life and work. These new computing paradigms lower the cost and improve the performance, particularly for concepts and applications such as the Internet of Things (IoT) and the Internet of Everything (IoE). In addition, the Dew computing paradigm will require new programming models that will efficiently reduce the complexity and improve the productivity and usability of scalable distributed computing, following the principles of High-Productivity computing.}
    }

 Open Access 

A Self-Optimizing Cloud Computing System for Distributed Storage and Processing of Semantic Web Data

Sven Groppe, Johannes Blume, Dennis Heinrich, Stefan Werner

Open Journal of Cloud Computing (OJCC), 1(2), Pages 1-14, 2014, Downloads: 12922, Citations: 2

Full-Text: pdf | URN: urn:nbn:de:101:1-201705194478 | GNL-LP: 113236065X | Meta-Data: tex xml rdf rss | Show/Hide Abstract | Show/Hide BibTex

Abstract: Clouds are dynamic networks of common, off-the-shell computers to build computation farms. The rapid growth of databases in the context of the semantic web requires efficient ways to store and process this data. Using cloud technology for storing and processing Semantic Web data is an obvious way to overcome difficulties in storing and processing the enormously large present and future datasets of the Semantic Web. This paper presents a new approach for storing Semantic Web data, such that operations for the evaluation of Semantic Web queries are more likely to be processed only on local data, instead of using costly distributed operations. An experimental evaluation demonstrates the performance improvements in comparison to a naive distribution of Semantic Web data.

BibTex:

    @Article{OJCC-v1i2n01_Groppe,
        title     = {A Self-Optimizing Cloud Computing System for Distributed Storage and Processing of Semantic Web Data},
        author    = {Sven Groppe and
                     Johannes Blume and
                     Dennis Heinrich and
                     Stefan Werner},
        journal   = {Open Journal of Cloud Computing (OJCC)},
        issn      = {2199-1987},
        year      = {2014},
        volume    = {1},
        number    = {2},
        pages     = {1--14},
        url       = {http://nbn-resolving.de/urn:nbn:de:101:1-201705194478},
        urn       = {urn:nbn:de:101:1-201705194478},
        publisher = {RonPub},
        bibsource = {RonPub},
        abstract = {Clouds are dynamic networks of common, off-the-shell computers to build computation farms. The rapid growth of databases in the context of the semantic web requires efficient ways to store and process this data. Using cloud technology for storing and processing Semantic Web data is an obvious way to overcome difficulties in storing and processing the enormously large present and future datasets of the Semantic Web. This paper presents a new approach for storing Semantic Web data, such that operations for the evaluation of Semantic Web queries are more likely to be processed only on local data, instead of using costly distributed operations. An experimental evaluation demonstrates the performance improvements in comparison to a naive distribution of Semantic Web data.}
    }

 Open Access 

Evaluation of Node Failures in Cloud Computing Using Empirical Data

Abdulelah Alwabel, Robert John Walters, Gary B. Wills

Open Journal of Cloud Computing (OJCC), 1(2), Pages 15-24, 2014, Downloads: 9820, Citations: 3

Full-Text: pdf | URN: urn:nbn:de:101:1-201705194435 | GNL-LP: 1132360609 | Meta-Data: tex xml rdf rss | Show/Hide Abstract | Show/Hide BibTex

Abstract: Cloud has emerged as a new computing paradigm that promises to move into computing-as-utility era. Desktop Cloud is a new type of Cloud computing introduced to further achieve this ambition with an aim to reduce costs. It merges two computing models: Cloud computing and volunteer computing. The aim of Desktop Cloud is to provide Cloud services out of infrastructure that is not made for this purpose, like PCs and laptops. Such computing resources lead to a high level of volatility as a result of the fact that they can leave without prior knowledge. This paper studies the impact of node failures using evaluation metrics based on real data collected from public archive to simulate failure events in the infrastructure of a Desktop Cloud. The contribution of this paper is: (i) analysing the failure events, (ii) proposing metrics to evaluate Desktop Clouds, and (iii) evaluating several VM allocation mechanisms in the presence of node failures.

BibTex:

    @Article{OJCC-2014v1i2n02_Alwabel,
        title     = {Evaluation of Node Failures in Cloud Computing Using Empirical Data},
        author    = {Abdulelah Alwabel and
                     Robert John Walters and
                     Gary B. Wills},
        journal   = {Open Journal of Cloud Computing (OJCC)},
        issn      = {2199-1987},
        year      = {2014},
        volume    = {1},
        number    = {2},
        pages     = {15--24},
        url       = {http://nbn-resolving.de/urn:nbn:de:101:1-201705194435},
        urn       = {urn:nbn:de:101:1-201705194435},
        publisher = {RonPub},
        bibsource = {RonPub},
        abstract = {Cloud has emerged as a new computing paradigm that promises to move into computing-as-utility era. Desktop Cloud is a new type of Cloud computing introduced to further achieve this ambition with an aim to reduce costs. It merges two computing models: Cloud computing and volunteer computing. The aim of Desktop Cloud is to provide Cloud services out of infrastructure that is not made for this purpose, like PCs and laptops. Such computing resources lead to a high level of volatility as a result of the fact that they can leave without prior knowledge. This paper studies the impact of node failures using evaluation metrics based on real data collected from public archive to simulate failure events in the infrastructure of a Desktop Cloud. The contribution of this paper is: (i) analysing the failure events, (ii) proposing metrics to evaluate Desktop Clouds, and (iii) evaluating several VM allocation mechanisms in the presence of node failures.}
    }

 Open Access 

An Introductory Approach to Risk Visualization as a Service

Victor Chang

Open Journal of Cloud Computing (OJCC), 1(1), Pages 1-9, 2014, Downloads: 9603, Citations: 13

Full-Text: pdf | URN: urn:nbn:de:101:1-201705194429 | GNL-LP: 1132360595 | Meta-Data: tex xml rdf rss | Show/Hide Abstract | Show/Hide BibTex

Abstract: This paper introduces the Risk Visualization as a Service (RVaaS) and presents the motivation, rationale, methodology, Cloud APIs used, operations and examples of using RVaaS. Risks can be calculated within seconds and presented in the form of Visualization to ensure that unexploited areas are ex-posed. RVaaS operates in two phases. The first phase includes the risk modeling in Black Scholes Model (BSM), creating 3D Visualization and Analysis. The second phase consists of calculating key derivatives such as Delta and Theta for financial modeling. Risks presented in visualization allow the potential investors and stakeholders to keep track of the status of risk with regard to time, prices and volatility. Our approach can improve accuracy and performance. Results in experiments show that RVaaS can perform up to 500,000 simulations and complete all simulations within 24 seconds for time steps of up to 50. We also introduce financial stock market analysis (FSMA) that can fully blend with RVaaS and demonstrate two examples that can help investors make better decision based on the pricing and market volatility information. RVaaS provides a structured way to deploy low cost, high quality risk assessment and support real-time calculations.

BibTex:

    @Article{OJCC-v1i1n01_Chang,
        title     = {An Introductory Approach to Risk Visualization as a Service},
        author    = {Victor Chang},
        journal   = {Open Journal of Cloud Computing (OJCC)},
        issn      = {2199-1987},
        year      = {2014},
        volume    = {1},
        number    = {1},
        pages     = {1--9},
        url       = {http://nbn-resolving.de/urn:nbn:de:101:1-201705194429},
        urn       = {urn:nbn:de:101:1-201705194429},
        publisher = {RonPub},
        bibsource = {RonPub},
        abstract = {This paper introduces the Risk Visualization as a Service (RVaaS) and presents the motivation, rationale, methodology, Cloud APIs used, operations and examples of using RVaaS. Risks can be calculated within seconds and presented in the form of Visualization to ensure that unexploited areas are ex-posed. RVaaS operates in two phases. The first phase includes the risk modeling in Black Scholes Model (BSM), creating 3D Visualization and Analysis. The second phase consists of calculating key derivatives such as Delta and Theta for financial modeling. Risks presented in visualization allow the potential investors and stakeholders to keep track of the status of risk with regard to time, prices and volatility. Our approach can improve accuracy and performance. Results in experiments show that RVaaS can perform up to 500,000 simulations and complete all simulations within 24 seconds for time steps of up to 50. We also introduce financial stock market analysis (FSMA) that can fully blend with RVaaS and demonstrate two examples that can help investors make better decision based on the pricing and market volatility information. RVaaS provides a structured way to deploy low cost, high quality risk assessment and support real-time calculations.}
    }

 Open Access 

Block-level De-duplication with Encrypted Data

Pasquale Puzio, Refik Molva, Melek Önen, Sergio Loureiro

Open Journal of Cloud Computing (OJCC), 1(1), Pages 10-18, 2014, Downloads: 12422, Citations: 20

Full-Text: pdf | URN: urn:nbn:de:101:1-201705194448 | GNL-LP: 1132360617 | Meta-Data: tex xml rdf rss | Show/Hide Abstract | Show/Hide BibTex

Abstract: Deduplication is a storage saving technique which has been adopted by many cloud storage providers such as Dropbox. The simple principle of deduplication is that duplicate data uploaded by different users are stored only once. Unfortunately, deduplication is not compatible with encryption. As a scheme that allows deduplication of encrypted data segments, we propose ClouDedup, a secure and efficient storage service which guarantees blocklevel deduplication and data confidentiality at the same time. ClouDedup strengthens convergent encryption by employing a component that implements an additional encryption operation and an access control mechanism. We also propose to introduce an additional component which is in charge of providing a key management system for data blocks together with the actual deduplication operation. We show that the overhead introduced by these new components is minimal and does not impact the overall storage and computational costs.

BibTex:

    @Article{OJCC-v1i1n02_Puzio,
        title     = {Block-level De-duplication with Encrypted Data},
        author    = {Pasquale Puzio and
                     Refik Molva and
                     Melek {\"O}nen and
                     Sergio Loureiro},
        journal   = {Open Journal of Cloud Computing (OJCC)},
        issn      = {2199-1987},
        year      = {2014},
        volume    = {1},
        number    = {1},
        pages     = {10--18},
        url       = {http://nbn-resolving.de/urn:nbn:de:101:1-201705194448},
        urn       = {urn:nbn:de:101:1-201705194448},
        publisher = {RonPub},
        bibsource = {RonPub},
        abstract = {Deduplication is a storage saving technique which has been adopted by many cloud storage providers such as Dropbox. The simple principle of deduplication is that duplicate data uploaded by different users are stored only once. Unfortunately, deduplication is not compatible with encryption. As a scheme that allows deduplication of encrypted data segments, we propose ClouDedup, a secure and efficient storage service which guarantees blocklevel deduplication and data confidentiality at the same time. ClouDedup strengthens convergent encryption by employing a component that implements an additional encryption operation and an access control mechanism. We also propose to introduce an additional component which is in charge of providing a key management system for data blocks together with the actual deduplication operation. We show that the overhead introduced by these new components is minimal and does not impact the overall storage and computational costs.}
    }

 Open Access 

Measuring and analyzing German and Spanish customer satisfaction of using the iPhone 4S Mobile Cloud service

Victor Chang

Open Journal of Cloud Computing (OJCC), 1(1), Pages 19-26, 2014, Downloads: 7295, Citations: 8

Full-Text: pdf | URN: urn:nbn:de:101:1-201705194450 | GNL-LP: 1132360633 | Meta-Data: tex xml rdf rss | Show/Hide Abstract | Show/Hide BibTex

Abstract: This paper presents the customer satisfaction analysis for measuring popularity in the Mobile Cloud, which is an emerging area in the Cloud and Big Data Computing. Organizational Sustainability Modeling (OSM) is the proposed method used in this research. The twelve-month of German and Spanish consumer data are used for the analysis to investigate the return and risk status associated with the ratings of customer satisfaction in the iPhone 4S Mobile Cloud services. Results show that there is a decline in the satisfaction ratings in Germany and Spain due to economic downturn and competitions in the market, which support our hypothesis. Key outputs have been explained and they confirm that all analysis and interpretations fulfill the criteria for OSM. The use of statistical and visualization method proposed by OSM can expose unexploited data and allows the stakeholders to understand the status of return and risk of their Cloud strategies easier than the use of other data analysis.

BibTex:

    @Article{OJCC-v1i1n03_Chang,
        title     = {Measuring and analyzing German and Spanish customer satisfaction of using the iPhone 4S Mobile Cloud service},
        author    = {Victor Chang},
        journal   = {Open Journal of Cloud Computing (OJCC)},
        issn      = {2199-1987},
        year      = {2014},
        volume    = {1},
        number    = {1},
        pages     = {19--26},
        url       = {http://nbn-resolving.de/urn:nbn:de:101:1-201705194450},
        urn       = {urn:nbn:de:101:1-201705194450},
        publisher = {RonPub},
        bibsource = {RonPub},
        abstract = {This paper presents the customer satisfaction analysis for measuring popularity in the Mobile Cloud, which is an emerging area in the Cloud and Big Data Computing. Organizational Sustainability Modeling (OSM) is the proposed method used in this research. The twelve-month of German and Spanish consumer data are used for the analysis to investigate the return and risk status associated with the ratings of customer satisfaction in the iPhone 4S Mobile Cloud services. Results show that there is a decline in the satisfaction ratings in Germany and Spain due to economic downturn and competitions in the market, which support our hypothesis. Key outputs have been explained and they confirm that all analysis and interpretations fulfill the criteria for OSM. The use of statistical and visualization method proposed by OSM can expose unexploited data and allows the stakeholders to understand the status of return and risk of their Cloud strategies easier than the use of other data analysis.}
    }

OJCC Publication Fees

All articles published by RonPub are fully open access and online available to readers free of charge. To be able to provide open access journals, RonPub defrays the costs (induced by processing and editing of manuscripts, provision and maintenance of infrastructure, and routine operation and management of journals) by charging an one-time publication fee for each accepted article. In order to ensure that the fee is never a barrier to publication, RonPub offers a fee waiver for authors from low-income countries. Authors who do not have funds to cover publication fees should submit an application during the submission process. Applications of waiver will be examined on a case by case basis. The scientific committee members of RonPub are entitled a partial waiver of the standard publication fees as reward for their work. 

  • Standard publication fee: 338 Euro (excluding tax).
  • Authors from the low-income countries: 71% waiver of the standard publication fee. (Note: The list is subject to change based on the data of the World Bank Group.):
    Afghanistan, Bangladesh, Benin, Bhutan, Bolivia (Plurinational State of), Burkina Faso, Burundi, Cambodia, Cameroon, Central African Republic, Chad, Comoros, Congo (Democratic Republic), Côte d'Ivoire, Djibouti, Eritrea, Ethiopia, Gambia, Ghana, Guinea, Guinea-Bissau, Haiti, Honduras, Kenya, Kiribati, Korea (Democratic People’s Republic), Kosovo, Kyrgyz Republic, Lao (People’s Democratic Republic), Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Micronesia (Federated States of), Moldova, Morocco, Mozambique, Myanmar, Nepal, Nicaragua, Niger, Nigeria, Papua New Guinea, Rwanda, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Sudan, Swaziland, Syrian Arab Republic, São Tomé and Principe, Tajikistan, Tanzania, Timor-Leste, Togo, Uganda, Uzbekistan, Vietnam, West Bank and Gaza Strip, Yemen (Republic), Zambia, Zimbabwe
  • Scientific committee members: 25% waiver of the standard publication fee.
  • Guest editors and reviewers: 25% waiver of the standard publication fee for one year.

Payments are subject to tax. A German VAT (value-added tax) at 19% will be charged if applicable. US and Canadian customers need to provide their sales tax number and their certificate of incorporation to be exempt from the VAT charge; European Union customers (not German customers) need to provide their VAT to be exempt from the VAT charge. Customers from Germany and other countries will be charged with the VAT charge. Individuals are not eligible for tax exempt status.

Editors and reviewers have no access to payment information. The inability to pay will not influence the decision to publish a paper; decisions to publish are only based on the quality of work and the editorial criteria.

OJCC Indexing

In order for our publications getting widely abstracted, indexed and cited, the following methods are employed:

  • Various meta tags are embedded in each publication webpage, including Google Scholar Tags, Dublic Core, EPrints, BE Press and Prism. This enables crawlers of e.g. Google Scholar to discover and index our publications.
  • Different metadata export formats are provided for each article, including BibTex, XML, RSS and RDF. This makes readers to cite our papers easily.
  • An OAI-PMH interface is implemented, which facilitates our article metadata harvesting by indexing services and databases.

The paper Getting Indexed by Bibliographic Databases in the Area of Computer Science provides a comprehensive survey on indexing formats, techniques and databases. We will also continue our efforts on dissemination and indexing of our publications.

OJCC has been indexed by the following libraries and bibliographic databases:

Submission to Open Journal of Cloud Computing (OJCC)

Please submit your manuscript by carefully filling in the information in the following web form. If there technical problems, you may also submit your manuscript by sending the information and the manuscript to .

Submission to Regular or Special Issue

Please specify if the paper is submitted to a regular issue or one of the special issues:

Type of Paper

Please specify the type of your paper here. Please check Aims & Scope if you are not sure of which type your paper is.





Title

Please specify the title of your paper here:

Abstract

Please copy & paste the abstract of your paper here:

Authors

Please provide necessary information about the authors of your submission here. Please mark the contact authors, which will be contacted for the main correspondence.

Author 1:


Name:
EMail:
Affiliation:
Webpage (optional):

Author 2:


Name:
EMail:
Affiliation:
Webpage (optional):

Author 3:


Name:
EMail:
Affiliation:
Webpage (optional):

Add Author

Conflicts of Interest

Please specify any conflicts of interests here. Conflicts of interest occur e.g. if the author and the editor are colleagues, work or worked closely together, or are relatives.

Suggestion of Editors (Optional)

You can suggest editors (with scientific background of the topics addressed in your submission) for handling your submission. The Editor-in-Chief may consider your suggestion, but may also choose another editor.

Suggestion of Reviewers (Optional)

You can suggest reviewers (with scientific background of the topics addressed in your submission) for handling your submission. The editor of your submission may consider your suggestion, but may also choose other or additional reviewers in order to guarantee an independent review process.

Reviewer 1:

Name:
EMail:
Affiliation:
Webpage (optional):

Reviewer 2:

Name:
EMail:
Affiliation:
Webpage (optional):

Reviewer 3:

Name:
EMail:
Affiliation:
Webpage (optional):

Add Reviewer

Paper upload

Please choose your manuscript file for uploading. It should be a pdf file. Please take care that your manuscript is formatted according to the templates provided by RonPub, which are available at our Author Guidelines page. Manuscripts not formatted according to our RonPub templates will be rejected without review!

If you wish that the reviewer are not aware of your name, please submit a blinded manuscript leaving out identifiable information like authors' names and affiliations.

Choose PDF file...

Chosen PDF file: none

Captcha

Please fill in the characters of the image into the text field under the image.

Captcha

Submission

For Authors

Manuscript Preparation

Authors should first read the author guidelines of the corresponding journal. Manuscripts must be prepared using the manuscript template of the respective journal. It is available as word and latex version for download at the Author Guidelines of the corresponding journal page. The template describes the format and structure of manuscripts and other necessary information for preparing manuscripts. Manuscripts should be written in English. There is no restriction on the length of manuscripts.

Submission

Authors submit their manuscripts via the submit page of the corresponding journal. Authors first submit their manuscripts in PDF format. Once a manuscript is accepted, the author then submits the revised manuscript as PDF file and word file or latex folder (with all the material necessary to generate the PDF file). The work described in the submitted manuscript must be previously unpublished; it is not under consideration for publication anywhere else. 

Authors are welcome to suggest qualified reviewers for their papers, but this is not mandatory. If the author wants to do so, please provide the name, affiliations and e-mail addresses for all suggested reviewers.

Manuscript Status

After submission of manuscripts, authors will receive an email to confirm receipt of manuscripts within a few days. Subsequent enquiries concerning paper progress should be made to the corresponding editorial office (see individual journal webpage for concrete contact information).

Review Procedure

RonPub is committed to enforcing a rigorous peer-review process. All manuscripts submitted for publication in RonPub journals are strictly and thoroughly peer-reviewed. When a manuscript is submitted to a RonPub journal, the editor-in-chief of the journal assigns it to an appropriate editor who will be in charge of the review process of the manuscript. The editor first suggests potential reviewers and then organizes the peer-reviewing herself/himself or entrusts it to the editor office. For each manuscript, typically three review reports will be collected. The editor and the editor-in-chief evaluate the manuscript itself and the review reports and make an accept/revision/reject decision. Authors will be informed with the decision and reviewing results within 6-8 weeks on average after the manuscript submission. In the case of revision, authors are required to perform an adequate revision to address the concerns from evaluation reports. A new round of peer-review will be performed if necessary.

Accepted manuscripts are published online immediately.

Copyrights

Authors publishing with RonPub open journals retain the copyright to their work. 

All articles published by RonPub is fully open access and online available to readers free of charge.  RonPub publishes all open access articles under the Creative Commons Attribution License,  which permits unrestricted use, distribution and reproduction freely, provided that the original work is properly cited.

Digital Archiving Policy

Our publications have been archived and permanently-preserved in the German National Library. The publications, which are archived in the German National Library, are not only long-term preserved but also accessible in the future, because the German National Library ensures that digital data saved in the old formats can be viewed and used on current computer systems in the same way they were on the original systems which are long obsolete. Further measures will be taken if necessary. Furthermore, we also encourage our authors to self-archive their articles published on the website of RonPub.

For Editors

About RonPub

RonPub is academic publisher of online, open access, peer-reviewed journals. All articles published by RonPub is fully open access and online available to readers free of charge.

RonPub is located in Lübeck, Germany. Lübeck is a beautiful harbour city, 60 kilometer away from Hamburg.

Editor-in-Chief Responsibilities

The Editor-in-Chief of each journal is mainly responsible for the scientific quality of the journal and for assisting in the management of the journal. The Editor-in-Chief suggests topics for the journal, invites distinguished scientists to join the editorial board, oversees the editorial process, and makes the final decision whether a paper can be published after peer-review and revisions.

As a reward for the work of a Editor-in-Chief, the Editor-in-Chief will obtain a 25% discount of the standard publication fee for her/his papers (the Editor-in-Chief is one of authors) published in any of RonPub journals.

Editors’ Responsibilities

Editors assist the Editor-in-Chief in the scientific quality and in decision about topics of the journal. Editors are also encouraged to help to promote the journal among their peers and at conferences. An editor invites at least three reviewers to review a manuscript, but may also review him-/herself the manuscript. After carefully evaluating the review reports and the manuscript itself, the editor makes a commendation about the status of the manuscript. The editor's evaluation as well as the review reports are then sent to EiC, who make the final decision whether a paper can be published after peer-review and revisions. 

The communication with Editorial Board members is done primarily by E-mail, and the Editors are expected to respond within a few working days on any question sent by the Editorial Office so that manuscripts can be processed in a timely fashion. If an editor does not respond or cannot process the work in time, and under some special situations, the editorial office may forward the requests to the Publishers or Editor-in-Chief, who will take the decision directly.

As a reward for the work of editors, an editor will obtain a 25% discount of the standard publication fee for her/his papers (the editor is one of authors) published in any of RonPub journals.

Guest Editors’ Responsibilities

Guest Editors are responsible of the scientific quality of their special issues. Guest Editors will be in charge of inviting papers, of supervising the refereeing process (each paper should be reviewed at least by three reviewers), and of making decisions on the acceptance of manuscripts submitted to their special issue. As regular issues, all accepted papers by (guest) editors will be sent to the EiC of the journal, who will check the quality of the papers, and make the final decsion whether a paper can be published.

Our editorial office will have the right directly asking authors to revise their paper if there are quality issues, e.g. weak quality of writing, and missing information. Authors are required to revise their paper several times if necessary. A paper accepted by it's quest editor may be rejected by the EiC of the journal due to a low quality. However, this occurs only when authors do not really take efforts to revise their paper. A high-quality publication needs the common efforts from the journal, reviewers, editors, editor-in-chief and authors.

The Guest Editors are also expected to write an editorial paper for the special issue. As a reward for work, all guest editors and reviewers working on a special issue will obtain a 25% discount of the standard publication fee for any of their papers published in any of RonPub journals for one year.

Reviewers’ Responsiblity

A reviewer is mainly responsible for reviewing of manuscripts, writing reviewing report and suggesting acception or deny of manuscripts. Reviews are encouraged to provide input about the quality and management of the journal, and help promote the journal among their peers and at conferences.  

Upon the quality of reviewing work, a reviewer will have the potential to be promoted to a full editorial board member. 

As a reward for the reviewing work, a reviewer will obtain a 25% discount of the standard publication fee for her/his papers (the review is one of authors) published in any of RonPub journals.

Launching New Journals

RonPub always welcomes suggestions for new open access journals in any research area. We are also open for publishing collaborations with research societies. Please send your proposals for new journals or for publishing collaboration to This email address is being protected from spambots. You need JavaScript enabled to view it. .

Publication Criteria

This part provides important information for both the scientific committees and authors.

Ethic Requirement:

For scientific committees: Each editor and reviewer should conduct the evaluation of manuscripts objectively and fairly.
For authors: Authors should present their work honestly without fabrication, falsification, plagiarism or inappropriate data manipulation.

Pre-Check:

In order to filter fabricated submissions, the editorial office will check the authenticity of the authors and their affiliations before a peer-review begins. It is important that the authors communicate with us using the email addresses of their affiliations and provide us the URL addresses of their affiliations. To verify the originality of submissions, we use various plagiarism detection tools to check the content of manuscripts submitted to our journal against existing publications. The overall quality of paper will be also checked including format, figures, tables, integrity and adequacy. Authors may be required to improve the quality of their paper before sending it out for review. If a paper is obviously of low quality, the paper will be directly rejected.

Acceptance Criteria:

The criteria for acceptance of manuscripts are the quality of work. This will concretely be reflected in the following aspects:

  • Novelty and Practical Impact
  • Technical Soundness
  • Appropriateness and Adequacy of 
    • Literature Review
    • Background Discussion
    • Analysis of Issues
  • Presentation, including 
    • Overall Organization 
    • English 
    • Readability

For a contribution to be acceptable for publication, these points should be at least in middle level.

Guidelines for Rejection:

  • If the work described in the manuscript has been published, or is under consideration for publication anywhere else, it will not be evaluated.
  • If the work is a plagiarism, or contains data falsification or fabrication, it will be rejected.
  • Manuscripts, which have seriously technical flaws, will not be accepted.

Call for Journals

Research Online Publishing (RonPub, www.ronpub.com) is a publisher of online, open access and peer-reviewed scientific journals.  For more information about RonPub please visit this link.

RonPub always welcomes suggestions for new journals in any research area. Please send your proposals for journals along with your Curriculum Vitae to This email address is being protected from spambots. You need JavaScript enabled to view it. .

We are also open for publishing collaborations with research societies. Please send your publishing collaboration also to This email address is being protected from spambots. You need JavaScript enabled to view it. .

Be an Editor / Be a Reviewer

RonPub always welcomes qualified academicians and practitioners to join as editors and reviewers. Being an editor/a reviewer is a matter of prestige and personnel achievement. Upon the quality of reviewing work, a reviewer will have the potential to be promoted to a full editorial board member.

If you would like to participate as a scientific committee member of any of RonPub journals, please send an email to This email address is being protected from spambots. You need JavaScript enabled to view it. with your curriculum vitae. We will revert back as soon as possible. For more information about editors/reviewers, please visit this link.

Contact RonPub

Location

RonPub UG (haftungsbeschränkt)
Hiddenseering 30
23560 Lübeck
Germany

Comments and Questions

For general inquiries, please e-mail to This email address is being protected from spambots. You need JavaScript enabled to view it. .

For specific questions on a certain journal, please visit the corresponding journal page to see the email address.