Serrated Back Blocks
(50 Products)
Serrated Back Cutter Block for mech feed moulding machines with 60° serrations. For profile moulding with serrated back knives. Available for mechanical feed on moulders or in a chip-limitation version for use on spindles and other manually-fed machines. A profile depth of up to 35mm can be obtained.
Serrated Back Cutter Blocks for mechanical feed
A 4 wing cutter block taking 8mm or 10mm thick serrated back knives. Available in widths from 40mm to 230mm. Suitable for mechanical feed only.
Serrated Back Cutter Blocks for manual feed - with limiters
A 2 wing cutter block taking 8mm thick serrated back knives and limiters. Available in widths from 40mm to 230mm. Knife and limiter positions can be exchanged to reverse the rotation direction. Suitable for manual feed.
Limiter Type
-
240mm RH rotation Serrated Cutter Block High precision Moulding with Power Lock Weinig System moulding cutter block: Suitable for use on Weinig Powermat. Leadermac & SCM HSK CNC Moulders - Hardened, Ground Precison Balanced. The production processes are kept under strict quality control and the company is QA approved to ISO9001 - 2008 Manufacturing Process: Manufactured from high grade case hardened steel suitable for the demands of a HSK design taper. The steel is sourced from approved, certified UK stockholders and has full traceability. Hardening is closely controlled, especially on the taper and face features to provide the correct surface hardness along with a high core strength. Tapers and faces are precision ground on CNC controlled grinding machines and measured with calibrated inspection fixtures to ensure all HSK taper features are within prescribed tolerances. The tool blade clamping features are machined on a 5 axis CNC machine using the ground taper and centres as a location to ensure the minimum radial run out. Blade clamps are precision machined and hardened using a Tufftride process to reduce any wear. Each tool holder is individually dynamically balanced in two planes to G2.5 @ 12,000 rpm and is provided with a certificate of conformance. Each tool holder is individually packed in its own tube. Labelling and marking on the tool holder confirms balance and allows full traceability. Each tool holder is supplied with a set of blade clamps and special clamping screws. The ends of the tool holders are permanently marked to show direction of rotation and the maximum safe protrusion of the blade. All tool holders for blades of 100mm and longer have an extra end cap fitted for added rigidity under cutting conditions.Lead Time: 5 Days£ Enquire -
240mm LH rotation Serrated Cutter Block High precision Moulding with Power Lock Weinig System moulding cutter block: Suitable for use on Weinig Powermat. Leadermac & SCM HSK CNC Moulders - Hardened, Ground Precison Balanced. The production processes are kept under strict quality control and the company is QA approved to ISO9001 - 2008 Manufacturing Process: Manufactured from high grade case hardened steel suitable for the demands of a HSK design taper. The steel is sourced from approved, certified UK stockholders and has full traceability. Hardening is closely controlled, especially on the taper and face features to provide the correct surface hardness along with a high core strength. Tapers and faces are precision ground on CNC controlled grinding machines and measured with calibrated inspection fixtures to ensure all HSK taper features are within prescribed tolerances. The tool blade clamping features are machined on a 5 axis CNC machine using the ground taper and centres as a location to ensure the minimum radial run out. Blade clamps are precision machined and hardened using a Tufftride process to reduce any wear. Each tool holder is individually dynamically balanced in two planes to G2.5 @ 12,000 rpm and is provided with a certificate of conformance. Each tool holder is individually packed in its own tube. Labelling and marking on the tool holder confirms balance and allows full traceability. Each tool holder is supplied with a set of blade clamps and special clamping screws. The ends of the tool holders are permanently marked to show direction of rotation and the maximum safe protrusion of the blade. All tool holders for blades of 100mm and longer have an extra end cap fitted for added rigidity under cutting conditions.Lead Time: 5 Days£ Enquire
-
40mm RH rotation Serrated Cutter Block High precision Moulding with Power Lock Weinig System moulding cutter block: Suitable for use on Weinig Powermat. Leadermac & SCM HSK CNC Moulders - Hardened, Ground Precison Balanced. The production processes are kept under strict quality control and the company is QA approved to ISO9001 - 2008 Manufacturing Process: Manufactured from high grade case hardened steel suitable for the demands of a HSK design taper. The steel is sourced from approved, certified UK stockholders and has full traceability. Hardening is closely controlled, especially on the taper and face features to provide the correct surface hardness along with a high core strength. Tapers and faces are precision ground on CNC controlled grinding machines and measured with calibrated inspection fixtures to ensure all HSK taper features are within prescribed tolerances. The tool blade clamping features are machined on a 5 axis CNC machine using the ground taper and centres as a location to ensure the minimum radial run out. Blade clamps are precision machined and hardened using a Tufftride process to reduce any wear. Each tool holder is individually dynamically balanced in two planes to G2.5 @ 12,000 rpm and is provided with a certificate of conformance. Each tool holder is individually packed in its own tube. Labelling and marking on the tool holder confirms balance and allows full traceability. Each tool holder is supplied with a set of blade clamps and special clamping screws. The ends of the tool holders are permanently marked to show direction of rotation and the maximum safe protrusion of the blade. All tool holders for blades of 100mm and longer have an extra end cap fitted for added rigidity under cutting conditions.Lead Time: 5 Days£ Enquire
-
40mm LH rotation Serrated Cutter Block High precision Moulding with Power Lock Weinig System moulding cutter block: Suitable for use on Weinig Powermat. Leadermac & SCM HSK CNC Moulders - Hardened, Ground Precison Balanced. The production processes are kept under strict quality control and the company is QA approved to ISO9001 - 2008 Manufacturing Process: Manufactured from high grade case hardened steel suitable for the demands of a HSK design taper. The steel is sourced from approved, certified UK stockholders and has full traceability. Hardening is closely controlled, especially on the taper and face features to provide the correct surface hardness along with a high core strength. Tapers and faces are precision ground on CNC controlled grinding machines and measured with calibrated inspection fixtures to ensure all HSK taper features are within prescribed tolerances. The tool blade clamping features are machined on a 5 axis CNC machine using the ground taper and centres as a location to ensure the minimum radial run out. Blade clamps are precision machined and hardened using a Tufftride process to reduce any wear. Each tool holder is individually dynamically balanced in two planes to G2.5 @ 12,000 rpm and is provided with a certificate of conformance. Each tool holder is individually packed in its own tube. Labelling and marking on the tool holder confirms balance and allows full traceability. Each tool holder is supplied with a set of blade clamps and special clamping screws. The ends of the tool holders are permanently marked to show direction of rotation and the maximum safe protrusion of the blade. All tool holders for blades of 100mm and longer have an extra end cap fitted for added rigidity under cutting conditions.Lead Time: 5 Days£ Enquire
-
60mm LH rotation Serrated Cutter Block High precision Moulding with Power Lock Weinig System moulding cutter block: Suitable for use on Weinig Powermat. Leadermac & SCM HSK CNC Moulders - Hardened, Ground Precison Balanced. The production processes are kept under strict quality control and the company is QA approved to ISO9001 - 2008 Manufacturing Process: Manufactured from high grade case hardened steel suitable for the demands of a HSK design taper. The steel is sourced from approved, certified UK stockholders and has full traceability. Hardening is closely controlled, especially on the taper and face features to provide the correct surface hardness along with a high core strength. Tapers and faces are precision ground on CNC controlled grinding machines and measured with calibrated inspection fixtures to ensure all HSK taper features are within prescribed tolerances. The tool blade clamping features are machined on a 5 axis CNC machine using the ground taper and centres as a location to ensure the minimum radial run out. Blade clamps are precision machined and hardened using a Tufftride process to reduce any wear. Each tool holder is individually dynamically balanced in two planes to G2.5 @ 12,000 rpm and is provided with a certificate of conformance. Each tool holder is individually packed in its own tube. Labelling and marking on the tool holder confirms balance and allows full traceability. Each tool holder is supplied with a set of blade clamps and special clamping screws. The ends of the tool holders are permanently marked to show direction of rotation and the maximum safe protrusion of the blade. All tool holders for blades of 100mm and longer have an extra end cap fitted for added rigidity under cutting conditions.Lead Time: 5 Days£ Enquire
-
60mm RH rotation Serrated Cutter Block High precision Moulding with Power Lock Weinig System moulding cutter block: Suitable for use on Weinig Powermat. Leadermac & SCM HSK CNC Moulders - Hardened, Ground Precison Balanced. The production processes are kept under strict quality control and the company is QA approved to ISO9001 - 2008 Manufacturing Process: Manufactured from high grade case hardened steel suitable for the demands of a HSK design taper. The steel is sourced from approved, certified UK stockholders and has full traceability. Hardening is closely controlled, especially on the taper and face features to provide the correct surface hardness along with a high core strength. Tapers and faces are precision ground on CNC controlled grinding machines and measured with calibrated inspection fixtures to ensure all HSK taper features are within prescribed tolerances. The tool blade clamping features are machined on a 5 axis CNC machine using the ground taper and centres as a location to ensure the minimum radial run out. Blade clamps are precision machined and hardened using a Tufftride process to reduce any wear. Each tool holder is individually dynamically balanced in two planes to G2.5 @ 12,000 rpm and is provided with a certificate of conformance. Each tool holder is individually packed in its own tube. Labelling and marking on the tool holder confirms balance and allows full traceability. Each tool holder is supplied with a set of blade clamps and special clamping screws. The ends of the tool holders are permanently marked to show direction of rotation and the maximum safe protrusion of the blade. All tool holders for blades of 100mm and longer have an extra end cap fitted for added rigidity under cutting conditions.Lead Time: 5 Days£ Enquire
-
80mm LH rotation Serrated Cutter Block High precision Moulding with Power Lock Weinig System moulding cutter block: Suitable for use on Weinig Powermat. Leadermac & SCM HSK CNC Moulders - Hardened, Ground Precison Balanced. The production processes are kept under strict quality control and the company is QA approved to ISO9001 - 2008Lead Time: 5 Days£ Enquire
-
80mm RH rotation Serrated Cutter Block High precision Moulding with Power Lock Weinig System moulding cutter block: Suitable for use on Weinig Powermat. Leadermac & SCM HSK CNC Moulders - Hardened, Ground Precison Balanced. The production processes are kept under strict quality control and the company is QA approved to ISO9001 - 2008Lead Time: 5 Days£ Enquire
-
Planing cutterhead - High tensile steel tool body with positioning for four planer blades. Positioning of the 30 x 3 mm regrindable knives with appropriate gauge. Tool fitting with Tungsten Carbide planing knives on request. Diameter 122mm Planing width 130mm Bore size 40mm Suitable for moulders by Weinig, Wadkin, Leadermac etcIn StockList £316.80£234.00Inc Vat £280.80 -
Planing cutterhead - High tensile steel tool body with positions for four planing knives. Positioning of the 30 x 3 mm regrindable knives with appropriate gauge. Tool fitting with Tungsten Carbide planing knives on request. Diameter 122mm Planing width 180mm Bore size 40mm Suitable for moulders by Weinig, Wadkin, Leadermac etcIn StockList £367.20£288.00Inc Vat £345.60 -
Planing cutterhead - High tensile steel tool body with positions for four planing knives. Positioning of the 30 x 3 mm regrindable knives with appropriate gauge. Tool fitting with Tungsten Carbide planing knives on request. Diameter 122mm Planing width 230mm Bore size 40mm Suitable for moulders by Weinig, Wadkin, Leadermac etcIn StockList £475.20£378.00Inc Vat £453.60 -
Planing cutterhead - High tensile steel tool body with positions for four planing knives. Positioning of the 30 x 3 mm regrindable knives with appropriate gauge. Tool fitting with Tungsten Carbide planing knives on request. Diameter 122mm Planing width 60mm Bore size 40mm Suitable for moulders by Weinig, Wadkin, Leadermac etcIn StockList £201.60£42.00Inc Vat £50.40
-
High quality steel serrated block for moulding cutters Diameter 122mm Width 60mm Bore size 40mm Suitable for moulders by Weinig, Wadkin, Leadermac etcLead Time: 30 Days£197.00£236.40 -
100mm LH rotation Serrated Cutter Block High precision Moulding with Power Lock Weinig System moulding cutter block: Suitable for use on Weinig Powermat. Leadermac & SCM HSK CNC Moulders - Hardened, Ground Precison Balanced. The production processes are kept under strict quality control and the company is QA approved to ISO9001 - 2008Lead Time: 5 Days£ Enquire
-
100mm RH rotation Serrated Cutter Block High precision Moulding with Power Lock Weinig System moulding cutter block: Suitable for use on Weinig Powermat. Leadermac & SCM HSK CNC Moulders - Hardened, Ground Precison Balanced. The production processes are kept under strict quality control and the company is QA approved to ISO9001 - 2008Lead Time: 5 Days£ Enquire
-
Whitehill Combination planer and serrated profile cutter head to suit d=40mm shaft on a moulder with mechanical feed. The block is designed to take 8mm thick serrated profile knives for mould sections and centre lock planing blades for flat section - 230mm long.. Head can be fitted with either 40, 60, 80, 100 or 130mm serrated profiles. Same size serrated jaw assembly must be used as the size of profile serrated mould. Price includes cutter head fitted with planing section and one pair of serrated jaws only... (please specify size of jaws/profiles) Other sizes can be purchased separetly. Tool body is made in steel. Diameter of block D =125mm Height/length h =230mm Cutter block bore d =40mm Cutting circle Max D =200mm Material of block =Steel Min - Max RPM =3500-6500 Options to consider: Serrated Jaws Per pair (inc. Screws) CODE: Size: WH480S00800 : 40mm WH480S00810 : 60mm WH480S00820 : 80mm WH480S00830 : 100mm WH480S00840 : 130mm List of Spares: WH040T00230 Planer blades 230 x 16 x 3mm WH490S00130 Planer wedge 230 Jaw P/S WH440S00110 Planer jaw screw M8 x 25mm WH440S00030 Serrated jaw screw M8 x 25mm WH340S00010 Key 4mm T HandleLead Time: 7 Days£598.00£717.60 -
Whitehill Cutterhead Serrated Cutter Block Z=2 D=122 x 100 x 40 for Moulder material:Steel units:eachLead Time: 7 Days£160.00£192.00 -
Whitehill Cutterhead Serrated Cutter Block Z=2 D=122 X 130 X 40 for Moulder material:Steel units:eachLead Time: 7 Days£286.00£343.20 -
Whitehill Cutterhead Serrated Cutter Block Z=2 D=122 X 40 X 40 for Moulder material:Steel units:eachLead Time: 7 Days£130.00£156.00 -
Whitehill Cutterhead Serrated Cutter Block Z=2 D=122 X 60 X 40 for Moulder material:Steel units:eachLead Time: 7 Days£140.00£168.00 -
Whitehill Cutterhead Serrated Cutter Block Z=2 D=122 X 80 X 40 for Moulder material:Steel units:eachLead Time: 7 Days£150.00£180.00 -
- Cutterblock diameter 125mm
- Maximum cutting circle 200mm
- Cutterblock height 100mm
Lead Time: 7 Days£204.00£244.80 -
- Cutterblock diameter 125mm
- Maximum cutting circle 200mm
- Cutterblock height 100mm
Lead Time: 7 Days£204.00£244.80 -
- Cutterblock diameter 125mm
- Maximum cutting circle 200mm
- Cutterblock height 100mm
Lead Time: 7 Days£204.00£244.80 -
- Cutterblock diameter 125mm
- Maximum cutting circle 200mm
- Cutterblock height 130mm
Lead Time: 7 Days£232.00£278.40 -
- Cutterblock diameter 125mm
- Maximum cutting circle 200mm
- Cutterblock height 130mm
Lead Time: 7 Days£232.00£278.40 -
- Cutterblock diameter 125mm
- Maximum cutting circle 200mm
- Cutterblock height 130mm
Lead Time: 7 Days£232.00£278.40 -
- Cutterblock diameter 125mm
- Maximum cutting circle 200mm
- Cutterblock height 40mm
Lead Time: 7 Days£151.00£181.20 -
- Cutterblock diameter 125mm
- Maximum cutting circle 200mm
- Cutterblock height 40mm
Lead Time: 7 Days£151.00£181.20 -
- Cutterblock diameter 125mm
- Maximum cutting circle 200mm
- Cutterblock height 40mm
Lead Time: 7 Days£151.00£181.20 -
- Cutterblock diameter 125mm
- Maximum cutting circle 200mm
- Cutterblock height 60mm
Lead Time: 7 Days£160.00£192.00 -
- Cutterblock diameter 125mm
- Maximum cutting circle 200mm
- Cutterblock height 60mm
Lead Time: 7 Days£160.00£192.00 -
- Cutterblock diameter 125mm
- Maximum cutting circle 200mm
- Cutterblock height 60mm
Lead Time: 7 Days£160.00£192.00 -
- Cutterblock diameter 125mm
- Maximum cutting circle 200mm
- Cutterblock height 80mm
Lead Time: 7 Days£194.00£232.80
