Triumph TIGER Service Manual page 414
Hide thumbs
Also See for TIGER:
- Service manual (377 pages) ,
- Handbook (118 pages) ,
- Operation manual (114 pages)
Table of Contents
Advertisement
6. Remove the wheel and the wheel spacers.
To prevent wheel and bearing damage, observe
absolute cleanliness and ensure there is no dirt
ingress to the wheel bearings while the wheel is
removed.
8. Thoroughly clean all components and inspect for
wear or damage.
Tziumm
Installation
1.
Lightly smear the wheel spacers with grease and
locate in the hubs.
2.
Position the wheel between the forks ensuring
the spacers remain in position on both sides.
1. Wheel spacer (right hand shown)
3.
Refit the wheel spindle from the right hand side
and tighten to 95 Nm.
4.
Lower the motorcycle to the ground and pump
the front suspension to allow the right hand fork
to
spindle.
5.
Tighten the fork pinch bolts to 20 Nm.
1. Fork pinch bolts
6.
Thoroughly clean and degrease the brake discs.
7.
Fit the brake calipers (see page 14-18).
Service Manual - Tiger
Wheels/Tyres
^ o
to its natural position on the wheel
'float'
III
15.7
- Quick Links:
- Electrical Wires
Hide quick links:
Advertisement
Chapters
Table of Contents
