Triumph TIGER Service Manual page 416
Hide thumbs
Also See for TIGER:
- Service manual (377 pages) ,
- Handbook (118 pages) ,
- Operation manual (114 pages)
Table of Contents
Advertisement
Bearing insertion
tool
3880070-10310
Left
bearing
Small
face
bearing
3880070-T0310
Right
bearing
face
Small
bearing
1.
Fit the wheel bearings and centre sleeve using the
method
above.
described
Tool 3880070 - T0301 in Position on Wheel
2.
Fit a
new circlip.
3.
Lubricate and fit
new
Lubricate the seal's knife-edge with grease to NLGI 2
specification (we recommend Mobil HP222).
4.
Models with ABS brakes: Refit the ABS pulser ring
(See page 14-33).
5.
Fit the front wheel. (See page 15-7).
uMP
Support tool
3880075-T0310
to Large face
wheel
to
3880075-T0310
to Large face to wheel
seals to the front wheel.
Service Manual - Tiger
Before starting work, ensure the motorcycle is stabilised
and adequately supported. This will help prevent it from
falling and causing injury to the operator or damage to
the motorcycle.
Raise and support the rear of the motorcycle to allow
removal of the rear wheel.
If the engine has recently been running, the exhaust
be hot. Before working on or near the
system will
exhaust system, allow sufficient time for the exhaust
system to cool as touching any part of a hot exhaust
system could cause burn injuries.
Do
allow the caliper to hang on the brake hose as
not
this may damage the hose.
Damaged
could cause brake failure leading to loss
hoses
of control and an accident
2.
Remove the brake caliper (see page 14-26) and tie
aside.
3.
Remove the nut from the rear wheel spindle.
1. Rear wheel spindle nut
4.
Support the wheel and withdraw the wheel spindle..
5.
Noting its position, release the brake caliper carrier
from the slot on the swinging arm and roll the wheel
forward until the chain can be detached from the
rear sprocket.
Wheels/Tyres
15.9
- Quick Links:
- Electrical Wires
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the TIGER and is the answer not in the manual?
Questions and answers