Model: AZ-107SS7-07SC
A mechanical 7-segment display from Alfa-Zeta. This display consists of 7 mechanical segments with a black and a white side. These segments can be switched very quickly using built-in electromagnets to display different characters. Each coil can be c..
€13.00
Ex Tax:€10.74
Model: FLIPDIGITDRIVER
A driver module specially made for the Flipdigit from Alfa-Zeta. The driver ensures that the coils of the Flipdigit are never activated for too long. Many Flipdigit drivers can be connected to each other. To place two next to each other, you can use ..
€7.50
Ex Tax:€6.20
Model: LEDBAR10X-G
LED bar with ten green LED's.
Specifications:
10x green LED
20 pins
Dimensions: 25.4 x 10.1 x 7.9 mm
Voltage: 1.9 - 2.3 V
Forward current: 20 mA..
€1.00
Ex Tax:€0.83
Model: LEDBAR10X-R
LED bar with ten red LED's.
Specifications:
10x red LED
20 pins
Dimensions: 25.4 x 10.1 x 7.9 mm
Voltage: 1.9 - 2.3 V
Forward current: 20 mA..
€1.00
Ex Tax:€0.83
Model: LEDBAR10X-GOB
LED bar with eight green LED's, one orange LED and one red LED.
Specifications:
8x green LED
1x orange LED
1x red LED
20 pins
Dimensions: 25.4 x 10.1 x 7.9 mm
Voltage: 1.9 - 2.3 V
Forward current: 20 mA..
€1.00
Ex Tax:€0.83
Model: SEEED-104020132
A segment display module from Seeed Studio. With the built-in Grove connection and supplied Grove cable, the module can easily be connected to the microcontroller boards from Seeed Studio or other microcontrollers with Grove connectors.
Specificat..
€8.50
Ex Tax:€7.02
Model: SEEED-104020133
A segment display module from Seeed Studio. With the built-in Grove connection and supplied Grove cable, the module can easily be connected to the microcontroller boards from Seeed Studio or other microcontrollers with Grove connectors.
Specificat..
€13.50
Ex Tax:€11.16
Model: SEGMENT1_0.56
Segment displays are often used in clocks or for indicating numbers in general, eg. to display a voltage.
This variant is fairly minimal with only 1 character, but for many applications 1 digit/letter is enough to indicate a status.
Here red LE..
€0.75
Ex Tax:€0.62
Model: SEGMENT4DP0.56
Segment displays are often used in clocks or for indicating numbers in general, eg. to display a voltage.
This variant is has a colon in the middle. The colon is often used to display counting seconds. (on-off-on-off etc.)
The same rules apply ..
€1.50
Ex Tax:€1.24
Model: TM1637-RED4MINI
A ready-to-use segment display that is controlled by a TM1637 LED Driver.
This allows you to easily control the segment display using only two pins on your Arduino (instead of 12 pins for 4 characters)
For more information on how to use this TM16..
€2.50
Ex Tax:€2.07
Model: MAX7219RED8DEC
A segment display that is controlled by a MAX7219 LED Driver.
This allows you to easily control the segment display using only three pins on your Arduino (instead of 16 pins for 8 characters)
Specifications:
Voltage: 3.3-5V (power and signa..
€4.00
Ex Tax:€3.31
Model: SEGMENT4_0.36
Segment displays are often used in clocks or for indicating numbers in general, eg to display a voltage.
This variant is also provided with a colon in the middle. The colon is often used to display counting seconds. (on-off-on-off etc.)
Here re..
€1.25
Ex Tax:€1.03
Model: TM1638MOD
An TM1638 LED 8 segment display with 8 LEDs and 8 buttons. The pinout is indicated on the board.
Specifications:
Voltage(power and signal): 5V DC
For more examples: TM1638 with an Arduino and this GitHub library..
€4.00
Ex Tax:€3.31
Model: WS-19806
This is a simple segment display Hat for a Raspberry Pi Pico, with RTC.
Note: No Raspberry Pi Pico is included.
Note: The wiki page below indicates that there is an RTC on the module, this is incorrect, there is no RTC on the module...
€4.00
Ex Tax:€3.31
Showing 1 to 15 of 15 (1 Pages)