Model: CZN-15E
An omnidirectional electret condenser microphone.
Specifications:
Supply voltage: 1.5 - 10V DC
Frequency range: 20 - 16000Hz
Sensitivity: ~-52dB
Output impedance: 2.2kΩ
Pinafstand: 2.5mm
Dimensions: 10 x 7mm (without pin headers)
..
€0.50
Ex Tax:€0.41
Model: DFROBOT-SEN0539-EN
Brand: DFRobot
The Gravity offline speech recognition sensor works completely offline. Besides the 121 built-in commands, it has a self-learning function, so you can train it to recognise any sound as a command. It is also compatible with a wide range of controller..
€17.50
Ex Tax:€14.46
Model: INMP441MIC
An omnidirectional MEMS microphone based on the INMP441 chip.
Specifications:
Supply voltage: 1.8-3.3V DC
Signal voltage: 1.8-3.3V
Average current: ~1.4mA
Chip: INMP441
Frequency range: 60-15,000Hz
Sensitivity: ~-26dBFS
Communica..
€3.50
Ex Tax:€2.89
Model: M5STACK-U096
Brand: M5Stack
This is a microphone module with a Grove connection for M5Stack. The MIC Unit has a built-in MAX4466 amplifier. The module can be read both with an analog and a digital pin (sound/no sound).
Specifications:
Built-in microphone amplifier: MAX..
€5.50
Ex Tax:€4.55
Model: M5STACK-U089
Brand: M5Stack
This is a Microphone module with a HY2.0 4P (Grove) connection for M5Stack. The module works via I2S communication.
Specifications:
Microphone: SPM1423
Low power consumption (~600uA)
2x LEGO® compatible holes
Dimensions: 24x24x13m..
€4.50
Ex Tax:€3.72
Model: MAX4466MICMOD
With this module you can easily measure the ambient sound with an analog pin on your Arduino.
The module amplifies the signal from the built-in microphone.
With the board even small sounds can easily be measured with an Arduino.
Specifications:
..
€2.50
Ex Tax:€2.07
Model: MAX9814MICMOD
With this module you can easily measure sound with an analog pin on your Arduino or other microcontroller. The module has an automatic gain/amplification (ACG) of the microphone: The module amplifies sounds with a low volume more, and sounds with a h..
€3.75
Ex Tax:€3.10
Model: MT8870MOD
This DMTF module, based on the MT8870 chip, can decode telephone tones. These are the tones you hear when entering a phone number.
On the 3.5mm connection you can eg connect your mobile phone that can transfer these tones to the DMTF module.
This a..
€3.50
Ex Tax:€2.89
Model: SEEED-101020023
A simple sound sensor from Seeed Studio with an omnidirectional electret condenser microphone and a built-in amplifier. This module can be used to detect sounds in the environment.
Specifications:
Supply voltage: 5V DC
Signal voltage: 5V
..
€7.00
Ex Tax:€5.79
Model: SOUNDDETECT
Detect sound! Set the potentiometer to a desired amount of sound at which a signal is generated.
The sensor works between the 3.3V and 5V. The signal is generated on the "OUT" pin...
€3.00
Ex Tax:€2.48
Showing 1 to 14 of 14 (1 Pages)