MediaCodecAudioRenderer

Artifact: androidx.media3:media3-exoplayer

Kotlin |Java

@UnstableApi
class MediaCodecAudioRenderer : MediaCodecRenderer, MediaClock

kotlin.Any
↳	androidx.media3.exoplayer.BaseRenderer
	↳	androidx.media3.exoplayer.mediacodec.MediaCodecRenderer
		↳	androidx.media3.exoplayer.audio.MediaCodecAudioRenderer

Decodes and renders audio using MediaCodec and an AudioSink.

This renderer accepts the following messages sent via createMessage on the playback thread:

Message with type MSG_SET_VOLUME to set the volume. The message payload should be a Float with 0 being silence and 1 being unity gain.
Message with type MSG_SET_AUDIO_ATTRIBUTES to set the audio attributes. The message payload should be an AudioAttributes instance that will configure the underlying audio track.
Message with type MSG_SET_AUX_EFFECT_INFO to set the auxiliary effect. The message payload should be an AuxEffectInfo instance that will configure the underlying audio track.
Message with type MSG_SET_SKIP_SILENCE_ENABLED to enable or disable skipping silences. The message payload should be a Boolean.
Message with type MSG_SET_AUDIO_SESSION_ID to set the audio session ID. The message payload should be a session ID Integer that will be attached to the underlying audio track.

Summary

Public constructors
`MediaCodecAudioRenderer( context: Context!, mediaCodecSelector: MediaCodecSelector! )`
`MediaCodecAudioRenderer( context: Context!, mediaCodecSelector: MediaCodecSelector!, eventHandler: Handler?, eventListener: AudioRendererEventListener? )`
`MediaCodecAudioRenderer( context: Context!, mediaCodecSelector: MediaCodecSelector!, eventHandler: Handler?, eventListener: AudioRendererEventListener?, audioSink: AudioSink! )`
`MediaCodecAudioRenderer( context: Context!, mediaCodecSelector: MediaCodecSelector!, enableDecoderFallback: Boolean, eventHandler: Handler?, eventListener: AudioRendererEventListener?, audioSink: AudioSink! )`
`MediaCodecAudioRenderer( context: Context!, mediaCodecSelector: MediaCodecSelector!, eventHandler: Handler?, eventListener: AudioRendererEventListener?, audioCapabilities: AudioCapabilities!, audioProcessors: Array<AudioProcessor!>! )` This function is deprecated. Use a constructor without `AudioCapabilities`.
`MediaCodecAudioRenderer( context: Context!, codecAdapterFactory: MediaCodecAdapter.Factory!, mediaCodecSelector: MediaCodecSelector!, enableDecoderFallback: Boolean, eventHandler: Handler?, eventListener: AudioRendererEventListener?, audioSink: AudioSink! )` Creates a new instance.
`MediaCodecAudioRenderer( context: Context!, codecAdapterFactory: MediaCodecAdapter.Factory!, mediaCodecSelector: MediaCodecSelector!, enableDecoderFallback: Boolean, eventHandler: Handler?, eventListener: AudioRendererEventListener?, audioSink: AudioSink!, loudnessCodecController: LoudnessCodecController? )` Creates a new instance.

Public functions
`Long`	`getDurationToProgressUs( isOnBufferAvailableListenerRegistered: Boolean, positionUs: Long, elapsedRealtimeUs: Long )` Returns minimum time playback must advance in order for the `render` call to make progress.
`MediaClock?`	`getMediaClock()` If the renderer advances its own playback position then this method returns a corresponding `MediaClock`.
`String!`	`getName()` Returns the name of this renderer, for logging and debugging purposes.
`PlaybackParameters!`	`getPlaybackParameters()` Returns the active playback parameters.
`Long`	`getPositionUs()` Returns the current media position in microseconds.
`Unit`	`handleMessage(@Renderer.MessageType messageType: Int, message: Any?)` Handles a message delivered to the target.
`Boolean`	`hasSkippedSilenceSinceLastCall()` Returns whether there is a skipped silence since the last call to this method.
`Boolean`	`isEnded()` Whether the renderer is ready for the `ExoPlayer` instance to transition to `STATE_ENDED`.
`Boolean`	`isReady()` Whether the renderer is able to immediately render media from the current position.
`Unit`	`setPlaybackParameters(playbackParameters: PlaybackParameters!)` Attempts to set the playback parameters.

Protected functions
`DecoderReuseEvaluation!`	`canReuseCodec( codecInfo: MediaCodecInfo!, oldFormat: Format!, newFormat: Format! )` Evaluates whether the existing `MediaCodec` can be kept for a new `Format`, and if it can whether it requires reconfiguration.
`Int`	`getCodecMaxInputSize( codecInfo: MediaCodecInfo!, format: Format!, streamFormats: Array<Format!>! )` Returns a maximum input size suitable for configuring a codec for `format` in a way that will allow possible adaptation to other compatible formats in `streamFormats`.
`Float`	`getCodecOperatingRateV23( targetPlaybackSpeed: Float, format: Format!, streamFormats: Array<Format!>! )` Returns the `KEY_OPERATING_RATE` value for a given playback speed, current `Format` and set of possible stream formats.
`(Mutable)List<MediaCodecInfo!>!`	`getDecoderInfos( mediaCodecSelector: MediaCodecSelector!, format: Format!, requiresSecureDecoder: Boolean )` Returns a list of decoders that can decode media in the specified format, in priority order.
`MediaCodecAdapter.Configuration!`	`getMediaCodecConfiguration( codecInfo: MediaCodecInfo!, format: Format!, crypto: MediaCrypto?, codecOperatingRate: Float )` Returns the `MediaCodecAdapter.Configuration` that will be used to create and configure a `MediaCodec` to decode the given `Format` for a playback.
`MediaFormat!`	`getMediaFormat( format: Format!, codecMimeType: String!, codecMaxInputSize: Int, codecOperatingRate: Float )` Returns the framework `MediaFormat` that can be used to configure a `MediaCodec` for decoding the given `Format` for playback.
`Unit`	`handleInputBufferSupplementalData(buffer: DecoderInputBuffer!)` Handles supplemental data associated with an input buffer.
`Unit`	`onCodecError(codecError: Exception!)` Called when a codec error has occurred.
`Unit`	`onCodecInitialized( name: String!, configuration: MediaCodecAdapter.Configuration!, initializedTimestampMs: Long, initializationDurationMs: Long )` Called when a `MediaCodec` has been created and configured.
`Unit`	`onCodecReleased(name: String!)` Called when a `MediaCodec` has been released.
`Unit`	`onDisabled()` Called when the renderer is disabled.
`Unit`	`onEnabled(joining: Boolean, mayRenderStartOfStream: Boolean)` Called when the renderer is enabled.
`DecoderReuseEvaluation?`	`onInputFormatChanged(formatHolder: FormatHolder!)` Called when a new `Format` is read from the upstream `MediaPeriod`.
`Unit`	`onOutputFormatChanged(format: Format!, mediaFormat: MediaFormat?)` Called when one of the output formats changes.
`Unit`	`onOutputStreamOffsetUsChanged(outputStreamOffsetUs: Long)` Called after the output stream offset changes.
`Unit`	`@CallSuper onPositionDiscontinuity()` See `onPositionDiscontinuity`.
`Unit`	`onPositionReset(positionUs: Long, joining: Boolean)` Called when the position is reset.
`Unit`	`onProcessedStreamChange()` Called after the last output buffer before a stream change has been processed.
`Unit`	`onRelease()` Called when the renderer is released.
`Unit`	`onReset()` Called when the renderer is reset.
`Unit`	`onStarted()` Called when the renderer is started.
`Unit`	`onStopped()` Called when the renderer is stopped.
`Boolean`	`processOutputBuffer( positionUs: Long, elapsedRealtimeUs: Long, codec: MediaCodecAdapter?, buffer: ByteBuffer?, bufferIndex: Int, bufferFlags: Int, sampleCount: Int, bufferPresentationTimeUs: Long, isDecodeOnlyBuffer: Boolean, isLastBuffer: Boolean, format: Format! )` Processes an output media buffer.
`Unit`	`renderToEndOfStream()` Incrementally renders any remaining output.
`Boolean`	`shouldUseBypass(format: Format!)` Returns whether buffers in the input format can be processed without a codec.
`Int`	`@RendererCapabilities.Capabilities supportsFormat(mediaCodecSelector: MediaCodecSelector!, format: Format!)` Returns the `Capabilities` for the given `Format`.

Inherited Constants

From androidx.media3.exoplayer.mediacodec.MediaCodecRenderer

const Float

CODEC_OPERATING_RATE_UNSET = -1.0f

Indicates no codec operating rate should be set.

From androidx.media3.exoplayer.Renderer

`const Long`	`DEFAULT_DURATION_TO_PROGRESS_US = 10000` Default minimum duration that the playback clock must advance before `render` can make progress.
`const Int`	`MSG_CUSTOM_BASE = 10000` Applications or extensions may define custom `MSG_*` constants that can be passed to renderers.
`const Int`	`MSG_SET_AUDIO_ATTRIBUTES = 3` A type of a message that can be passed to an audio renderer via `createMessage`.
`const Int`	`MSG_SET_AUDIO_SESSION_ID = 10` The type of a message that can be passed to audio and video renderers via `createMessage`.
`const Int`	`MSG_SET_AUX_EFFECT_INFO = 6` A type of a message that can be passed to an audio renderer via `createMessage`.
`const Int`	`MSG_SET_CAMERA_MOTION_LISTENER = 8` The type of a message that can be passed to a camera motion renderer via `createMessage`.
`const Int`	`MSG_SET_CHANGE_FRAME_RATE_STRATEGY = 5` The type of a message that can be passed to a video renderer via `createMessage`.
`const Int`	`MSG_SET_IMAGE_OUTPUT = 15` The type of message that can be passed to an image renderer to set a desired image output.
`const Int`	`MSG_SET_PREFERRED_AUDIO_DEVICE = 12` The type of a message that can be passed to audio renderers via `createMessage`.
`const Int`	`MSG_SET_PRIORITY = 16` The type of message that can be passed to a renderer to set its priority.
`const Int`	`MSG_SET_SCALING_MODE = 4` The type of a message that can be passed to a `MediaCodec`-based video renderer via `createMessage`.
`const Int`	`MSG_SET_SKIP_SILENCE_ENABLED = 9` The type of a message that can be passed to an audio renderer via `createMessage`.
`const Int`	`MSG_SET_VIDEO_EFFECTS = 13` The type of a message that can be passed to a video renderer.
`const Int`	`MSG_SET_VIDEO_FRAME_METADATA_LISTENER = 7` The type of a message that can be passed to a video renderer via `createMessage`.
`const Int`	`MSG_SET_VIDEO_OUTPUT = 1` The type of a message that can be passed to a video renderer via `createMessage`.
`const Int`	`MSG_SET_VIDEO_OUTPUT_RESOLUTION = 14` The type of a message that can be passed to a video renderer to set the desired output resolution.
`const Int`	`MSG_SET_VOLUME = 2` A type of a message that can be passed to an audio renderer via `createMessage`.
`const Int`	`MSG_SET_WAKEUP_LISTENER = 11` The type of a message that can be passed to a `Renderer` via `createMessage`, to inform the renderer that it can schedule waking up another component.
`const Int`	`STATE_DISABLED = 0` The renderer is disabled.
`const Int`	`STATE_ENABLED = 1` The renderer is enabled but not started.
`const Int`	`STATE_STARTED = 2` The renderer is started.

From androidx.media3.exoplayer.RendererCapabilities

`const Int`	`ADAPTIVE_NOT_SEAMLESS = 8` The `Renderer` can adapt between formats, but may suffer a brief discontinuity (~50-100ms) when adaptation occurs.
`const Int`	`ADAPTIVE_NOT_SUPPORTED = 0` The `Renderer` does not support adaptation between formats.
`const Int`	`ADAPTIVE_SEAMLESS = 16` The `Renderer` can seamlessly adapt between formats.
`const Int`	`ADAPTIVE_SUPPORT_MASK = 24` A mask to apply to `Capabilities` to obtain the `AdaptiveSupport` only.
`const Int`	`AUDIO_OFFLOAD_GAPLESS_SUPPORTED = 1024` The renderer supports audio offload and gapless transitions with this format.
`const Int`	`AUDIO_OFFLOAD_NOT_SUPPORTED = 0` Audio offload is not supported with this format.
`const Int`	`AUDIO_OFFLOAD_SPEED_CHANGE_SUPPORTED = 2048` The renderer supports audio offload and speed changes with this format.
`const Int`	`AUDIO_OFFLOAD_SUPPORTED = 512` The renderer supports audio offload with this format.
`const Int`	`AUDIO_OFFLOAD_SUPPORT_MASK = 3584` A mask to apply to `Capabilities` to obtain `AudioOffloadSupport` only.
`const Int`	`DECODER_SUPPORT_FALLBACK = 0` The format exceeds the primary decoder's capabilities but is supported by fallback decoder
`const Int`	`DECODER_SUPPORT_FALLBACK_MIMETYPE = 256` The format's MIME type is unsupported and the renderer may use a decoder for a fallback MIME type.
`const Int`	`DECODER_SUPPORT_MASK = 384` A mask to apply to `Capabilities` to obtain `DecoderSupport` only.
`const Int`	`DECODER_SUPPORT_PRIMARY = 128` The renderer is able to use the primary decoder for the format's MIME type.
`const Int`	`FORMAT_SUPPORT_MASK = 7` A mask to apply to `Capabilities` to obtain the `C.FormatSupport` only.
`const Int`	`HARDWARE_ACCELERATION_NOT_SUPPORTED = 0` The renderer is not able to use hardware acceleration.
`const Int`	`HARDWARE_ACCELERATION_SUPPORTED = 64` The renderer is able to use hardware acceleration.
`const Int`	`HARDWARE_ACCELERATION_SUPPORT_MASK = 64` A mask to apply to `Capabilities` to obtain `HardwareAccelerationSupport` only.
`const Int`	`TUNNELING_NOT_SUPPORTED = 0` The `Renderer` does not support tunneled output.
`const Int`	`TUNNELING_SUPPORTED = 32` The `Renderer` supports tunneled output.
`const Int`	`TUNNELING_SUPPORT_MASK = 32` A mask to apply to `Capabilities` to obtain `TunnelingSupport` only.

Inherited functions

From androidx.media3.exoplayer.BaseRenderer

`Unit`	`clearListener()` Clears the `Listener`.
`ExoPlaybackException!`	`createRendererException( cause: Throwable!, format: Format?, @PlaybackException.ErrorCode errorCode: Int )` Creates an `ExoPlaybackException` of type `TYPE_RENDERER` for this renderer.
`ExoPlaybackException!`	`createRendererException( cause: Throwable!, format: Format?, isRecoverable: Boolean, @PlaybackException.ErrorCode errorCode: Int )` Creates an `ExoPlaybackException` of type `TYPE_RENDERER` for this renderer.
`Unit`	`disable()` Disable the renderer, transitioning it to the `STATE_DISABLED` state.
`Unit`	`enable( configuration: RendererConfiguration!, formats: Array<Format!>!, stream: SampleStream!, positionUs: Long, joining: Boolean, mayRenderStartOfStream: Boolean, startPositionUs: Long, offsetUs: Long, mediaPeriodId: MediaSource.MediaPeriodId! )` Enables the renderer to consume from the specified `SampleStream`.
`RendererCapabilities!`	`getCapabilities()` Returns the capabilities of the renderer.
`Boolean`	`hasReadStreamToEnd()` Returns whether the renderer has read the current `SampleStream` to the end.
`Unit`	`init(index: Int, playerId: PlayerId!, clock: Clock!)` Initializes the renderer for playback with a player.
`Boolean`	`isCurrentStreamFinal()` Returns whether the current `SampleStream` will be the final one supplied before the renderer is next disabled or reset.
`Boolean`	`isSourceReady()` Returns whether the upstream source is ready.
`Unit`	`maybeThrowStreamError()` Throws an error that's preventing the renderer from reading from its `SampleStream`.
`Unit`	`onInit()` Called when the renderer is initialized.
`Unit`	`onRendererCapabilitiesChanged()` Called when the renderer capabilities are changed.
`Unit`	`onTimelineChanged(timeline: Timeline!)` Called when a new timeline is `set`.
`Int`	`@SampleStream.ReadDataResult readSource( formatHolder: FormatHolder!, buffer: DecoderInputBuffer!, @SampleStream.ReadFlags readFlags: Int )` Reads from the enabled upstream source.
`Unit`	`release()` Releases the renderer.
`Unit`	`replaceStream( formats: Array<Format!>!, stream: SampleStream!, startPositionUs: Long, offsetUs: Long, mediaPeriodId: MediaSource.MediaPeriodId! )` Replaces the `SampleStream` from which samples will be consumed.
`Unit`	`reset()` Forces the renderer to give up any resources (e.g. media decoders) that it may be holding.
`Unit`	`resetPosition(positionUs: Long)` Signals to the renderer that a position discontinuity has occurred.
`Unit`	`setCurrentStreamFinal()` Signals to the renderer that the current `SampleStream` will be the final one supplied before it is next disabled or reset.
`Unit`	`setListener(listener: RendererCapabilities.Listener!)` Sets the `Listener`.
`Int`	`skipSource(positionUs: Long)` Attempts to skip to the keyframe before the specified position, or to the end of the stream if `positionUs` is beyond it.
`Unit`	`start()` Starts the renderer, meaning that calls to `render` will cause media to be rendered.
`Unit`	`stop()` Stops the renderer, transitioning it to the `STATE_ENABLED` state.

From androidx.media3.exoplayer.mediacodec.MediaCodecRenderer

`MediaCodecDecoderException!`	`createDecoderException(cause: Throwable!, codecInfo: MediaCodecInfo?)`
`Unit`	`experimentalEnableProcessedStreamChangedAtStart()` Enables the renderer to invoke `onProcessedStreamChange` on the first stream.
`Boolean`	`flushOrReinitializeCodec()` Flushes the codec.
`Boolean`	`flushOrReleaseCodec()` Flushes the codec.
`Int`	`getCodecBufferFlags(buffer: DecoderInputBuffer!)` Returns the flags that should be set on `queueInputBuffer` or `queueSecureInputBuffer` for this buffer.
`Long`	`getDurationToProgressUs(positionUs: Long, elapsedRealtimeUs: Long)` Returns minimum amount of playback clock time that must pass in order for the `render` call to make progress.
`Long`	`getOutputStreamOffsetUs()` Returns the offset that should be subtracted from `bufferPresentationTimeUs` in `processOutputBuffer` to get the playback position with respect to the media.
`Long`	`getOutputStreamStartPositionUs()` Returns the start position of the current output stream in microseconds.
`Float`	`getPlaybackSpeed()` Returns the current playback speed, as set by `setPlaybackSpeed`.
`Boolean`	`isBypassEnabled()` Returns whether bypass is enabled by the renderer.
`Boolean`	`isBypassPossible(format: Format!)` Returns whether buffers in the input format can be processed without a codec.
`Unit`	`maybeInitCodecOrBypass()`
`Unit`	`@CallSuper onProcessedOutputBuffer(presentationTimeUs: Long)` Called when an output buffer is successfully processed.
`Unit`	`onQueueInputBuffer(buffer: DecoderInputBuffer!)` Called immediately before an input buffer is queued into the codec.
`Unit`	`onReadyToInitializeCodec(format: Format!)` Called when ready to initialize the `MediaCodecAdapter`.
`Unit`	`onStreamChanged( formats: Array<Format!>!, startPositionUs: Long, offsetUs: Long, mediaPeriodId: MediaSource.MediaPeriodId! )` Called when the renderer's stream has changed.
`Unit`	`releaseCodec()`
`Unit`	`render(positionUs: Long, elapsedRealtimeUs: Long)` Incrementally renders the `SampleStream`.
`Unit`	`@CallSuper resetCodecStateForFlush()` Resets the renderer internal state after a codec flush.
`Unit`	`@CallSuper resetCodecStateForRelease()` Resets the renderer internal state after a codec release.
`Unit`	`setPendingOutputEndOfStream()` Notifies the renderer that output end of stream is pending and should be handled on the next render.
`Unit`	`setPendingPlaybackException(exception: ExoPlaybackException!)` Sets an exception to be re-thrown by render.
`Unit`	`setPlaybackSpeed(currentPlaybackSpeed: Float, targetPlaybackSpeed: Float)` Indicates the playback speed to this renderer.
`Unit`	`setRenderTimeLimitMs(renderTimeLimitMs: Long)` Sets a limit on the time a single `render` call can spend draining and filling the decoder.
`Boolean`	`shouldInitCodec(codecInfo: MediaCodecInfo!)`
`Boolean`	`shouldReinitCodec()` Returns whether the renderer needs to re-initialize the codec, possibly as a result of a change in device capabilities.
`Boolean`	`shouldSkipDecoderInputBuffer(buffer: DecoderInputBuffer!)` Returns whether the input buffer should be skipped before the decoder.
`Int`	`@RendererCapabilities.Capabilities supportsFormat(format: Format!)` Returns the extent to which the `Renderer` supports a given format.
`java-static Boolean`	`supportsFormatDrm(format: Format!)` Returns whether this renderer supports the given `Format's` DRM scheme.
`Int`	`@RendererCapabilities.AdaptiveSupport supportsMixedMimeTypeAdaptation()` Returns the extent to which the `Renderer` supports adapting between supported formats that have different MIME types.
`Boolean`	`updateCodecOperatingRate()` Updates the codec operating rate, or triggers codec release and re-initialization if a previously set operating rate needs to be cleared.
`Unit`	`updateOutputFormatForTime(presentationTimeUs: Long)` Updates the output formats for the specified output buffer timestamp, calling `onOutputFormatChanged` if a change has occurred.

From androidx.media3.exoplayer.Renderer

`abstract Unit`	`enable( configuration: RendererConfiguration!, formats: Array<Format!>!, stream: SampleStream!, positionUs: Long, joining: Boolean, mayRenderStartOfStream: Boolean, startPositionUs: Long, offsetUs: Long, mediaPeriodId: MediaSource.MediaPeriodId! )` Enables the renderer to consume from the specified `SampleStream`.
`Unit`	`enableMayRenderStartOfStream()` Enables this renderer to render the start of the stream even if the state is not `STATE_STARTED` yet.
`abstract Unit`	`replaceStream( formats: Array<Format!>!, stream: SampleStream!, startPositionUs: Long, offsetUs: Long, mediaPeriodId: MediaSource.MediaPeriodId! )` Replaces the `SampleStream` from which samples will be consumed.

From androidx.media3.exoplayer.RendererCapabilities

`java-static Int`	`@RendererCapabilities.Capabilities create(@C.FormatSupport formatSupport: Int)` Returns `Capabilities` for the given `C.FormatSupport`.
`java-static Int`	`@RendererCapabilities.Capabilities create( @C.FormatSupport formatSupport: Int, @RendererCapabilities.AdaptiveSupport adaptiveSupport: Int, @RendererCapabilities.TunnelingSupport tunnelingSupport: Int )` Returns `Capabilities` combining the given `C.FormatSupport`, and `TunnelingSupport`.
`java-static Int`	`@RendererCapabilities.Capabilities create( @C.FormatSupport formatSupport: Int, @RendererCapabilities.AdaptiveSupport adaptiveSupport: Int, @RendererCapabilities.TunnelingSupport tunnelingSupport: Int, @RendererCapabilities.AudioOffloadSupport audioOffloadSupport: Int )` Returns `Capabilities` combining the given `C.FormatSupport`, , `TunnelingSupport`, and `AudioOffloadSupport`.
`java-static Int`	`@RendererCapabilities.Capabilities create( @C.FormatSupport formatSupport: Int, @RendererCapabilities.AdaptiveSupport adaptiveSupport: Int, @RendererCapabilities.TunnelingSupport tunnelingSupport: Int, @RendererCapabilities.HardwareAccelerationSupport hardwareAccelerationSupport: Int, @RendererCapabilities.DecoderSupport decoderSupport: Int )` Returns `Capabilities` combining the given `C.FormatSupport`, , `TunnelingSupport`, `HardwareAccelerationSupport`, and .
`java-static Int`	`@RendererCapabilities.Capabilities create( @C.FormatSupport formatSupport: Int, @RendererCapabilities.AdaptiveSupport adaptiveSupport: Int, @RendererCapabilities.TunnelingSupport tunnelingSupport: Int, @RendererCapabilities.HardwareAccelerationSupport hardwareAccelerationSupport: Int, @RendererCapabilities.DecoderSupport decoderSupport: Int, @RendererCapabilities.AudioOffloadSupport audioOffloadSupport: Int )` Returns `Capabilities` combining the given `C.FormatSupport`, , `TunnelingSupport`, `HardwareAccelerationSupport`, and `AudioOffloadSupport`.
`java-static Int`	`@RendererCapabilities.AdaptiveSupport getAdaptiveSupport(@RendererCapabilities.Capabilities supportFlags: Int)` Returns the `AdaptiveSupport` from the combined `Capabilities`.
`java-static Int`	`@RendererCapabilities.AudioOffloadSupport getAudioOffloadSupport( @RendererCapabilities.Capabilities supportFlags: Int )` Returns the `AudioOffloadSupport` from the combined `Capabilities`.
`java-static Int`	`@RendererCapabilities.DecoderSupport getDecoderSupport(@RendererCapabilities.Capabilities supportFlags: Int)` Returns the `DecoderSupport` from the combined `Capabilities`.
`java-static Int`	`@C.FormatSupport getFormatSupport(@RendererCapabilities.Capabilities supportFlags: Int)` Returns the `C.FormatSupport` from the combined `Capabilities`.
`java-static Int`	`@RendererCapabilities.HardwareAccelerationSupport getHardwareAccelerationSupport( @RendererCapabilities.Capabilities supportFlags: Int )` Returns the `HardwareAccelerationSupport` from the combined `Capabilities`.
`java-static Int`	`@RendererCapabilities.TunnelingSupport getTunnelingSupport(@RendererCapabilities.Capabilities supportFlags: Int)` Returns the `TunnelingSupport` from the combined `Capabilities`.
`java-static Boolean`	`isFormatSupported( @RendererCapabilities.Capabilities supportFlags: Int, allowExceedsCapabilities: Boolean )` Returns whether the `C.FormatSupport` from the combined `Capabilities` indicates the format is supported.
`Unit`	`setListener(listener: RendererCapabilities.Listener!)` Sets the `Listener`.

Inherited properties

From androidx.media3.exoplayer.BaseRenderer

`@MonotonicNonNull Clock!`	`@MonotonicNonNull clock`
`RendererConfiguration?`	`configuration`
`FormatHolder!`	`formatHolder`
`Int`	`index`
`Long`	`lastResetPositionUs`
`@MonotonicNonNull PlayerId!`	`@MonotonicNonNull playerId`
`Long`	`readingPositionUs`
`Int`	`state`
`SampleStream?`	`stream`
`Array<Format!>?`	`streamFormats`
`Long`	`streamOffsetUs`
`Timeline!`	`timeline`
`Int`	`@C.TrackType trackType`

From androidx.media3.exoplayer.mediacodec.MediaCodecRenderer

`MediaCodecAdapter?`	`codec`
`MediaCodecInfo?`	`codecInfo`
`Boolean`	`codecNeedsEosPropagation`
`Float`	`codecOperatingRate`
`MediaFormat?`	`codecOutputMediaFormat`
`DecoderCounters!`	`decoderCounters`
`Long`	`lastBufferInStreamPresentationTimeUs`
`Renderer.WakeupListener?`	`wakeupListener`

Public constructors

MediaCodecAudioRenderer

MediaCodecAudioRenderer(
    context: Context!,
    mediaCodecSelector: MediaCodecSelector!
)

Parameters
`context: Context!`	A context.
`mediaCodecSelector: MediaCodecSelector!`	A decoder selector.

MediaCodecAudioRenderer

MediaCodecAudioRenderer(
    context: Context!,
    mediaCodecSelector: MediaCodecSelector!,
    eventHandler: Handler?,
    eventListener: AudioRendererEventListener?
)

Parameters
`context: Context!`	A context.
`mediaCodecSelector: MediaCodecSelector!`	A decoder selector.
`eventHandler: Handler?`	A handler to use when delivering events to `eventListener`. May be null if delivery of events is not required.
`eventListener: AudioRendererEventListener?`	A listener of events. May be null if delivery of events is not required.

MediaCodecAudioRenderer

MediaCodecAudioRenderer(
    context: Context!,
    mediaCodecSelector: MediaCodecSelector!,
    eventHandler: Handler?,
    eventListener: AudioRendererEventListener?,
    audioSink: AudioSink!
)

Parameters
`context: Context!`	A context.
`mediaCodecSelector: MediaCodecSelector!`	A decoder selector.
`eventHandler: Handler?`	A handler to use when delivering events to `eventListener`. May be null if delivery of events is not required.
`eventListener: AudioRendererEventListener?`	A listener of events. May be null if delivery of events is not required.
`audioSink: AudioSink!`	The sink to which audio will be output.

MediaCodecAudioRenderer

MediaCodecAudioRenderer(
    context: Context!,
    mediaCodecSelector: MediaCodecSelector!,
    enableDecoderFallback: Boolean,
    eventHandler: Handler?,
    eventListener: AudioRendererEventListener?,
    audioSink: AudioSink!
)

Parameters
`context: Context!`	A context.
`mediaCodecSelector: MediaCodecSelector!`	A decoder selector.
`enableDecoderFallback: Boolean`	Whether to enable fallback to lower-priority decoders if decoder initialization fails. This may result in using a decoder that is slower/less efficient than the primary decoder.
`eventHandler: Handler?`	A handler to use when delivering events to `eventListener`. May be null if delivery of events is not required.
`eventListener: AudioRendererEventListener?`	A listener of events. May be null if delivery of events is not required.
`audioSink: AudioSink!`	The sink to which audio will be output.

MediaCodecAudioRenderer

MediaCodecAudioRenderer(
    context: Context!,
    mediaCodecSelector: MediaCodecSelector!,
    eventHandler: Handler?,
    eventListener: AudioRendererEventListener?,
    audioCapabilities: AudioCapabilities!,
    audioProcessors: Array<AudioProcessor!>!
)

MediaCodecAudioRenderer

MediaCodecAudioRenderer(
    context: Context!,
    codecAdapterFactory: MediaCodecAdapter.Factory!,
    mediaCodecSelector: MediaCodecSelector!,
    enableDecoderFallback: Boolean,
    eventHandler: Handler?,
    eventListener: AudioRendererEventListener?,
    audioSink: AudioSink!
)

Creates a new instance.

Parameters
`context: Context!`	A context.
`codecAdapterFactory: MediaCodecAdapter.Factory!`	The `MediaCodecAdapter.Factory` used to create instances.
`mediaCodecSelector: MediaCodecSelector!`	A decoder selector.
`enableDecoderFallback: Boolean`	Whether to enable fallback to lower-priority decoders if decoder initialization fails. This may result in using a decoder that is slower/less efficient than the primary decoder.
`eventHandler: Handler?`	A handler to use when delivering events to `eventListener`. May be null if delivery of events is not required.
`eventListener: AudioRendererEventListener?`	A listener of events. May be null if delivery of events is not required.
`audioSink: AudioSink!`	The sink to which audio will be output.

MediaCodecAudioRenderer

MediaCodecAudioRenderer(
    context: Context!,
    codecAdapterFactory: MediaCodecAdapter.Factory!,
    mediaCodecSelector: MediaCodecSelector!,
    enableDecoderFallback: Boolean,
    eventHandler: Handler?,
    eventListener: AudioRendererEventListener?,
    audioSink: AudioSink!,
    loudnessCodecController: LoudnessCodecController?
)

Creates a new instance.

Parameters
`context: Context!`	A context.
`codecAdapterFactory: MediaCodecAdapter.Factory!`	The `MediaCodecAdapter.Factory` used to create instances.
`mediaCodecSelector: MediaCodecSelector!`	A decoder selector.
`enableDecoderFallback: Boolean`	Whether to enable fallback to lower-priority decoders if decoder initialization fails. This may result in using a decoder that is slower/less efficient than the primary decoder.
`eventHandler: Handler?`	A handler to use when delivering events to `eventListener`. May be null if delivery of events is not required.
`eventListener: AudioRendererEventListener?`	A listener of events. May be null if delivery of events is not required.
`audioSink: AudioSink!`	The sink to which audio will be output.
`loudnessCodecController: LoudnessCodecController?`	The `LoudnessCodecController`, or null to not control loudness.

Public functions

getDurationToProgressUs

fun getDurationToProgressUs(
    isOnBufferAvailableListenerRegistered: Boolean,
    positionUs: Long,
    elapsedRealtimeUs: Long
): Long

Returns minimum time playback must advance in order for the render call to make progress.

If the Renderer has a registered , then the Renderer will be notified when decoder input and output buffers become available. These callbacks may affect the calculated minimum time playback must advance before a render call can make progress.

Parameters
`isOnBufferAvailableListenerRegistered: Boolean`	Whether the `Renderer` is using a with successfully registered OnBufferAvailableListener.
`positionUs: Long`	The current media time in microseconds, measured at the start of the current iteration of the rendering loop.
`elapsedRealtimeUs: Long`	`elapsedRealtime` in microseconds, measured at the start of the current iteration of the rendering loop.

Returns
`Long`	minimum time playback must advance before renderer is able to make progress.

getMediaClock

fun getMediaClock(): MediaClock?

If the renderer advances its own playback position then this method returns a corresponding MediaClock. If provided, the player will use the returned MediaClock as its source of time during playback. A player may have at most one renderer that returns a from this method.

Returns
`MediaClock?`	The `MediaClock` tracking the playback position of the renderer, or null.

getName

fun getName(): String!

Returns the name of this renderer, for logging and debugging purposes. Should typically be the renderer's (un-obfuscated) class name.

Returns
`String!`	The name of this renderer.

getPlaybackParameters

fun getPlaybackParameters(): PlaybackParameters!

Returns the active playback parameters.

getPositionUs

fun getPositionUs(): Long

Returns the current media position in microseconds.

handleMessage

fun handleMessage(@Renderer.MessageType messageType: Int, message: Any?): Unit

Handles a message delivered to the target.

Parameters
`@Renderer.MessageType messageType: Int`	The message type.
`message: Any?`	The message payload.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	If an error occurred whilst handling the message. Should only be thrown by targets that handle messages on the playback thread.

hasSkippedSilenceSinceLastCall

fun hasSkippedSilenceSinceLastCall(): Boolean

Returns whether there is a skipped silence since the last call to this method.

isEnded

fun isEnded(): Boolean

Whether the renderer is ready for the ExoPlayer instance to transition to STATE_ENDED. The player will make this transition as soon as true is returned by all of its renderers.

This method may be called when the renderer is in the following states: STATE_ENABLED, STATE_STARTED.

Returns
`Boolean`	Whether the renderer is ready for the player to transition to the ended state.

isReady

fun isReady(): Boolean

Whether the renderer is able to immediately render media from the current position.

If the renderer is in the STATE_STARTED state then returning true indicates that the renderer has everything that it needs to continue playback. Returning false indicates that the player should pause until the renderer is ready.

If the renderer is in the STATE_ENABLED state then returning true indicates that the renderer is ready for playback to be started. Returning false indicates that it is not.

This method may be called when the renderer is in the following states: STATE_ENABLED, STATE_STARTED.

Returns
`Boolean`	Whether the renderer is ready to render media.

setPlaybackParameters

fun setPlaybackParameters(playbackParameters: PlaybackParameters!): Unit

Attempts to set the playback parameters. The media clock may override the speed if changing the playback parameters is not supported.

Parameters
`playbackParameters: PlaybackParameters!`	The playback parameters to attempt to set.

Protected functions

canReuseCodec

protected fun canReuseCodec(
    codecInfo: MediaCodecInfo!,
    oldFormat: Format!,
    newFormat: Format!
): DecoderReuseEvaluation!

Evaluates whether the existing MediaCodec can be kept for a new Format, and if it can whether it requires reconfiguration.

The default implementation does not allow decoder reuse.

Parameters
`codecInfo: MediaCodecInfo!`	A `MediaCodecInfo` describing the decoder.
`oldFormat: Format!`	The `Format` for which the existing instance is configured.
`newFormat: Format!`	The new `Format`.

Returns
`DecoderReuseEvaluation!`	The result of the evaluation.

getCodecMaxInputSize

protected fun getCodecMaxInputSize(
    codecInfo: MediaCodecInfo!,
    format: Format!,
    streamFormats: Array<Format!>!
): Int

Returns a maximum input size suitable for configuring a codec for format in a way that will allow possible adaptation to other compatible formats in streamFormats.

Parameters
`codecInfo: MediaCodecInfo!`	A `MediaCodecInfo` describing the decoder.
`format: Format!`	The `Format` for which the codec is being configured.
`streamFormats: Array<Format!>!`	The possible stream formats.

Returns
`Int`	A suitable maximum input size.

getCodecOperatingRateV23

protected fun getCodecOperatingRateV23(
    targetPlaybackSpeed: Float,
    format: Format!,
    streamFormats: Array<Format!>!
): Float

Returns the KEY_OPERATING_RATE value for a given playback speed, current Format and set of possible stream formats.

The default implementation returns CODEC_OPERATING_RATE_UNSET.

Parameters
`targetPlaybackSpeed: Float`	The target factor by which playback should be sped up. This may be different from the current playback speed, for example, if the speed is temporarily adjusted for live playback.
`format: Format!`	The `Format` for which the codec is being configured.
`streamFormats: Array<Format!>!`	The possible stream formats.

Returns
`Float`	The codec operating rate, or `CODEC_OPERATING_RATE_UNSET` if no codec operating rate should be set.

getDecoderInfos

protected fun getDecoderInfos(
    mediaCodecSelector: MediaCodecSelector!,
    format: Format!,
    requiresSecureDecoder: Boolean
): (Mutable)List<MediaCodecInfo!>!

Returns a list of decoders that can decode media in the specified format, in priority order.

Parameters
`mediaCodecSelector: MediaCodecSelector!`	The decoder selector.
`format: Format!`	The `Format` for which a decoder is required.
`requiresSecureDecoder: Boolean`	Whether a secure decoder is required.

Returns
`(Mutable)List<MediaCodecInfo!>!`	A list of `MediaCodecInfo`s corresponding to decoders. May be empty.

Throws
`androidx.media3.exoplayer.mediacodec.MediaCodecUtil.DecoderQueryException`	Thrown if there was an error querying decoders.

getMediaCodecConfiguration

protected fun getMediaCodecConfiguration(
    codecInfo: MediaCodecInfo!,
    format: Format!,
    crypto: MediaCrypto?,
    codecOperatingRate: Float
): MediaCodecAdapter.Configuration!

Returns the MediaCodecAdapter.Configuration that will be used to create and configure a MediaCodec to decode the given Format for a playback.

Parameters
`codecInfo: MediaCodecInfo!`	Information about the `MediaCodec` being configured.
`format: Format!`	The `Format` for which the codec is being configured.
`crypto: MediaCrypto?`	For drm protected playbacks, a `MediaCrypto` to use for decryption.
`codecOperatingRate: Float`	The codec operating rate, or `CODEC_OPERATING_RATE_UNSET` if no codec operating rate should be set.

Returns
`MediaCodecAdapter.Configuration!`	The parameters needed to call configure.

getMediaFormat

protected fun getMediaFormat(
    format: Format!,
    codecMimeType: String!,
    codecMaxInputSize: Int,
    codecOperatingRate: Float
): MediaFormat!

Returns the framework MediaFormat that can be used to configure a MediaCodec for decoding the given Format for playback.

Parameters
`format: Format!`	The `Format` of the media.
`codecMimeType: String!`	The MIME type handled by the codec.
`codecMaxInputSize: Int`	The maximum input size supported by the codec.
`codecOperatingRate: Float`	The codec operating rate, or `CODEC_OPERATING_RATE_UNSET` if no codec operating rate should be set.

Returns
`MediaFormat!`	The framework `MediaFormat`.

handleInputBufferSupplementalData

protected fun handleInputBufferSupplementalData(buffer: DecoderInputBuffer!): Unit

Handles supplemental data associated with an input buffer.

The default implementation is a no-op.

Parameters
`buffer: DecoderInputBuffer!`	The input buffer that is about to be queued.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	Thrown if an error occurs handling supplemental data.

onCodecError

protected fun onCodecError(codecError: Exception!): Unit

Called when a codec error has occurred.

The default implementation is a no-op.

Parameters
`codecError: Exception!`	The error.

onCodecInitialized

protected fun onCodecInitialized(
    name: String!,
    configuration: MediaCodecAdapter.Configuration!,
    initializedTimestampMs: Long,
    initializationDurationMs: Long
): Unit

Called when a MediaCodec has been created and configured.

The default implementation is a no-op.

Parameters
`name: String!`	The name of the codec that was initialized.
`configuration: MediaCodecAdapter.Configuration!`	The `MediaCodecAdapter.Configuration` used to configure the codec.
`initializedTimestampMs: Long`	`elapsedRealtime` when initialization finished.
`initializationDurationMs: Long`	The time taken to initialize the codec in milliseconds.

onCodecReleased

protected fun onCodecReleased(name: String!): Unit

Called when a MediaCodec has been released.

The default implementation is a no-op.

Parameters
`name: String!`	The name of the codec that was released.

onDisabled

protected fun onDisabled(): Unit

Called when the renderer is disabled.

The default implementation is a no-op.

onEnabled

protected fun onEnabled(joining: Boolean, mayRenderStartOfStream: Boolean): Unit

Called when the renderer is enabled.

The default implementation is a no-op.

Parameters
`joining: Boolean`	Whether this renderer is being enabled to join an ongoing playback.
`mayRenderStartOfStream: Boolean`	Whether this renderer is allowed to render the start of the stream even if the state is not `STATE_STARTED` yet.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	If an error occurs.

onInputFormatChanged

protected fun onInputFormatChanged(formatHolder: FormatHolder!): DecoderReuseEvaluation?

Called when a new Format is read from the upstream MediaPeriod.

Parameters
`formatHolder: FormatHolder!`	A `FormatHolder` that holds the new `Format`.

Returns
`DecoderReuseEvaluation?`	The result of the evaluation to determine whether the existing decoder instance can be reused for the new format, or `null` if the renderer did not have a decoder.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	If an error occurs re-initializing the `MediaCodec`.

onOutputFormatChanged

protected fun onOutputFormatChanged(format: Format!, mediaFormat: MediaFormat?): Unit

Called when one of the output formats changes.

The default implementation is a no-op.

Parameters
`format: Format!`	The input `Format` to which future output now corresponds. If the renderer is in bypass mode, this is also the output format.
`mediaFormat: MediaFormat?`	The codec output `MediaFormat`, or `null` if the renderer is in bypass mode.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	Thrown if an error occurs configuring the output.

onOutputStreamOffsetUsChanged

protected fun onOutputStreamOffsetUsChanged(outputStreamOffsetUs: Long): Unit

Called after the output stream offset changes.

The default implementation is a no-op.

Parameters
`outputStreamOffsetUs: Long`	The output stream offset in microseconds.

onPositionDiscontinuity

@CallSuper
protected fun onPositionDiscontinuity(): Unit

See onPositionDiscontinuity.

onPositionReset

protected fun onPositionReset(positionUs: Long, joining: Boolean): Unit

Called when the position is reset. This occurs when the renderer is enabled after onStreamChanged has been called, and also when a position discontinuity is encountered.

After a position reset, the renderer's SampleStream is guaranteed to provide samples starting from a key frame.

The default implementation is a no-op.

Parameters
`positionUs: Long`	The new playback position in microseconds.
`joining: Boolean`	Whether this renderer is being enabled to join an ongoing playback.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	If an error occurs.

onProcessedStreamChange

protected fun onProcessedStreamChange(): Unit

Called after the last output buffer before a stream change has been processed.

onRelease

protected fun onRelease(): Unit

Called when the renderer is released.

The default implementation is a no-op.

onReset

protected fun onReset(): Unit

Called when the renderer is reset.

The default implementation is a no-op.

onStarted

protected fun onStarted(): Unit

Called when the renderer is started.

The default implementation is a no-op.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	If an error occurs.

onStopped

protected fun onStopped(): Unit

Called when the renderer is stopped.

The default implementation is a no-op.

processOutputBuffer

protected fun processOutputBuffer(
    positionUs: Long,
    elapsedRealtimeUs: Long,
    codec: MediaCodecAdapter?,
    buffer: ByteBuffer?,
    bufferIndex: Int,
    bufferFlags: Int,
    sampleCount: Int,
    bufferPresentationTimeUs: Long,
    isDecodeOnlyBuffer: Boolean,
    isLastBuffer: Boolean,
    format: Format!
): Boolean

Processes an output media buffer.

When a new ByteBuffer is passed to this method its position and limit delineate the data to be processed. The return value indicates whether the buffer was processed in full. If true is returned then the next call to this method will receive a new buffer to be processed. If false is returned then the same buffer will be passed to the next call. An implementation of this method is free to modify the buffer and can assume that the buffer will not be externally modified between successive calls. Hence an implementation can, for example, modify the buffer's position to keep track of how much of the data it has processed.

Note that the first call to this method following a call to onPositionReset will always receive a new ByteBuffer to be processed.

Parameters
`positionUs: Long`	The current media time in microseconds, measured at the start of the current iteration of the rendering loop.
`elapsedRealtimeUs: Long`	`elapsedRealtime` in microseconds, measured at the start of the current iteration of the rendering loop.
`codec: MediaCodecAdapter?`	The `MediaCodecAdapter` instance, or null in bypass mode were no codec is used.
`buffer: ByteBuffer?`	The output buffer to process, or null if the buffer data is not made available to the application layer (see `getOutputBuffer`). This `buffer` can only be null for video data. Note that the buffer data can still be rendered in this case by using the `bufferIndex`.
`bufferIndex: Int`	The index of the output buffer.
`bufferFlags: Int`	The flags attached to the output buffer.
`sampleCount: Int`	The number of samples extracted from the sample queue in the buffer. This allows handling multiple samples as a batch for efficiency.
`bufferPresentationTimeUs: Long`	The presentation time of the output buffer in microseconds.
`isDecodeOnlyBuffer: Boolean`	Whether the buffer timestamp is less than the intended playback start position.
`isLastBuffer: Boolean`	Whether the buffer is known to contain the last sample of the current stream. This flag is set on a best effort basis, and any logic relying on it should degrade gracefully to handle cases where it's not set.
`format: Format!`	The `Format` associated with the buffer.

Returns
`Boolean`	Whether the output buffer was fully processed (for example, rendered or skipped).

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	If an error occurs processing the output buffer.

renderToEndOfStream

protected fun renderToEndOfStream(): Unit

Incrementally renders any remaining output.

The default implementation is a no-op.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	Thrown if an error occurs rendering remaining output.

shouldUseBypass

protected fun shouldUseBypass(format: Format!): Boolean

Returns whether buffers in the input format can be processed without a codec.

This method is only called if the content is not DRM protected, because if the content is DRM protected use of bypass is never possible.

Parameters
`format: Format!`	The input `Format`.

Returns
`Boolean`	Whether playback bypassing `MediaCodec` is supported.

supportsFormat

@RendererCapabilities.Capabilities
protected fun supportsFormat(mediaCodecSelector: MediaCodecSelector!, format: Format!): Int

Returns the Capabilities for the given Format.

Parameters
`mediaCodecSelector: MediaCodecSelector!`	The decoder selector.
`format: Format!`	The `Format`.

Returns
`Int`	The `Capabilities` for this `Format`.

Throws
`androidx.media3.exoplayer.mediacodec.MediaCodecUtil.DecoderQueryException`	If there was an error querying decoders.